Instruction/ maintenance manual of the product HR2000 Makita
Go to page of 12
Rotary Hammer Capacities In wood In steel In concrete 18" 13" 20 mm (11116") (112") (314") I 20 mm (3/4") MODEL HRZOOO Variable Speed No load speed Blows Overall Net (RPMI per minute length weight 0 ~ 4,200 330" 2.
SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2. 3. 4. 5. 6.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool.
Bit grease Coat the bit shank head beforehand with a small amount (about 0.5- 1 g; 0.02-0.04'0z.) of bit grease. This chuck lubrication assures smooth action and longer service life. Installing or removing drill bit CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the bit.
Switch action Tool speed is increased by increasing pres- sure on the trigger. To start the tool, simply pull the trigger. Release the trigger to stop. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it.
Hammer drilling operation *Position the bit at the location for the hole, then pull the trigger. Do not force the tool. Light pressure gives best results. Keep the tool in posi- tion and prevent it from slipping away from the hole. *Do not apply more pressure when the hole becomes clogged with chips or par- ticles.
Secure the drill chuck in a vise or similar securing devise. Place the chuck key in one of the three holes so that the chuck body will not turn. rChuck key / Remove the screw from the chuck adapter assembly and screw the chuck adapter into the drill chuck.
MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Sharpening tungsten-carbide tip bit When your bit becomes dull, use an ordinary bench grinder with a wheel made of silicon carbide to resharpen it.
ACCESSOR I ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Nov.-14-'91 EN Note: The switch, noise suppressor and other part configurations may differ from country to country. 11.
KODEL HR2000 Jan -08-'92 US 1 2 3 4 5 6 7 8 11 12 13 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.
An important point after buying a device Makita HR2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita HR2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita HR2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita HR2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita HR2000 will certainly help you make a decision on the purchase.
If you already are a holder of Makita HR2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita HR2000.
However, one of the most important roles played by the user manual is to help in solving problems with Makita HR2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita HR2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
