Instruction/ maintenance manual of the product M Series APW Wyott
Go to page of 20
Phone: +1 (214) 421-7366 Fax: +1 (214) 565-0976 T oll Free: +1 (800) 527-2100 Website: www .apwwyott.com E-mail: info@apwwyott.com INST ALLA TION AND OPERA TING INSTRUCTIONS INTENDED FOR OTHER THAN HO.
T ABLE OF CONTENTS GENERAL INFORMA TION AND TROUBLESHOOTING 2 M SERIES - DIAGONAL CONT ACT CONVEYOR TOASTERS 3-9 Electrical Specifications 3 Installation 3 Location 6 Operating Instructions 6 Field Ad.
Model Stock Dimensions* Electrical Productivity Weight Number Number Halves/Hour Net/Ship 83501 120V -1600W-13.3A Up to 1600 M-83 83502 20"H x 24 5/8"W x 12"D 208V -1600W-7.7A “ “ 83/93 Ibs 83504 50.8 cm x 62.6 cm x 30.5 cm 230V -1470W-6.
4 2. ASSEMBL Y (REFER TO ILLUSTRA TIONS ABOVE) a) Lay the toaster on its side and install the four Adjustable Legs (Item 1) in threaded holes in base. T ighten legs with crescent wrench. The unit may be leveled by unscrewing the lower insert of each leg.
c) Remove T op Front Panel (Item 4A) by gripping rear edge and lifting up. The Bottom Front Panel (Item 4B) can then be removed by holding the top edge with one hand and the bottom edge with the other hand, then lifting panel up. d) Cut and remove the nylon tie securing the conveyor .
6 LOCA TION . 1. Place the toaster on a flat surface and in such a way that the unit's vents are not blocked. Air must circulate under and through the vents provided on the base, right side (M-83, M83D, & M-95), left side (M-91) and rear of the unit.
7 C. PRODUCTION T o Grill Buns - the following is the basic procedure to operate the bun toaster . Fig. 1. Heat toaster oil to melting point and fill the butter roller tray 2/3 full. Fig. 2. T urn "Main" power switch to "on." Turn motor switch "on"; the butter roller and conveyor will start.
8 M-91: Push Butter Roller shaft to the right to disengage the notched end of the shaft from the drive motor and remove. T o facilitate cleaning, the shaft assembly may be separated from the Butter Roller cylinder . Hold cylinder securely with one hand and slide the shaft out with the other hand.
9 a. Set Thermostat at 4000 or number 8 and allow a full 20 minutes for warm-up. b. Coconut oil is the recommended oil. Use of other oils will prove to be unsatisfactory . c. Sun surface should have even application of oil. d. Use fresher bread. Get better cutting from baker .
A T -10, A T -30, A T -10BT , A T -5, A T -200 SPECIFICA TIONS PLEASE READ P AGE 2 - "GENERAL INFORMA TION," BEFORE YOU CONTINUE. Electrical Information - Models A T -10 & A T -30: Each unit is equipped with a 4 foot (122 cm), 3 wire grounded power cord which terminates with a standard 3 prong plug.
Electrical information - A T -200 Each toaster is equipped with a 4 foot (122 cm), 3 wire grounded power supply cord which terminates with a 3 prong plug (6-50P).
12 C. INST ALLA TION 1. Place the toaster on a flat surface and in such a way that the unit's vents are not blocked. Air must circulate under and through vent provided on the base, left side and at the rear of the unit. A minimum clearance of one inch (1", 2.
13 OPERA TING INSTRUCTIONS A. PREP ARA TlON/W ARM-UP: 1. Main Power: T urn toaster on by pressing the Main Power switch up. T urn the toaster of f by pressing the Main Power switch down. 2. T emperature: Set the T op Heat knob and the Bottom Heat knob to the 6 setting (mid range) for warm-up.
14 SPECIFICA TIONS PLEASE READ P AGE 2 - "GENERAL INFORMA TION," BEFORE YOU CONTINUE. Electrical Information - Models BT -15 . Each unit is equipped with a 4 foot (122 cm), 3 wire grounded power cord which terminates with a standard 3 prong plug.
15 B. ASSEMBL Y 1. Lay the toast on its side and install four adjustable legs into threaded holes in base. T ighten legs with crescent wrench. The unit may be leveled by unscrewing the lower insert of each leg. Precise leveling is not required for proper operation of the toaster .
b) T emperature: TOP HEA T - The MIN. setting will help produce the lightest top-toast. The MAX. Setting will help produce the lightest toast. BOTTOM HEA T - The MIN. setting will help produce the lightest bottom- toast. The MAX. setting will help produce the darkest bottom-toast.
IMPORT ANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment. For W arranty Service and/or Parts, this information is required.
Notes: 18.
19 APW WYOTT EQUIPMENT LIMITED W ARRANTY APW W yott Foodservice Equipment Company warrants it's equipment against defects in materials and workmanship, subject to the following conditions: This warranty applies to the original owner only and is not assignable.
20 APW WYOTT 729 Third Avenue Dallas, TX 75226 Phone: +1 (214) 421-7366 Fax: +1 (214) 565-0976 T oll Free: +1 (800) 527-2100 Website: www .apwwyott.com E-mail: info@apwwyott.
An important point after buying a device APW Wyott M Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought APW Wyott M Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data APW Wyott M Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, APW Wyott M Series you will learn all the available features of the product, as well as information on its operation. The information that you get APW Wyott M Series will certainly help you make a decision on the purchase.
If you already are a holder of APW Wyott M Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime APW Wyott M Series.
However, one of the most important roles played by the user manual is to help in solving problems with APW Wyott M Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device APW Wyott M Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
