Instruction/ maintenance manual of the product DA390D Makita
Go to page of 12
Cordless Angle Drill Capacities Steel Wood Wood screw 10 mm (3/8”) MODEL DA390D 10 mm (3/8”) MODEL DA390DW With Fast Charger weight No load speed Dimensions (L x W x HI (RPMI INSTRUCTION MANUAL 10 mm (318”) SPEC IF I CAT I 0 N S 335 mm x 59 mm x 115 mm (13-1/4” x 2-3/8” x 4-1/2”1 1.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- READ ALL INSTRUCTIONS. 1.
14. 15. 16. 17. 18. 19. 20. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. AVOID UNINTENTIONAL STARTING. Don’t carry plugged-in tool with finger on switch.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) 25 50 100 AWG Size of Cord 18 18 18 I. SAVE THESE INSTRUCTIONS - This manual 150 16 9. Do not operate charger with damaged cord or plug - replace them im- mediately.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge 0Always switch off the tool before insertion or removal of the battery cartridge. 0 To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
0 When you charge a new battery cartridge or a battery cartridge which has not been used for a long period, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it almost completely a couple of times.
Drilling operation 0 Drilling in wood When drilling in wood, best results are obrained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece.
Overload protect0 r The overload protector automatically cuts out to break the circuit and the button .- pops out, whenever heavy work is pro- longed. Wait 20-30 seconds before press- ing the restart button to resume operation. Your finger should not be on the trigger when you press the restart button, however.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
June-16'89 EN 10 mm (3/8") CORDLESS ANGLE DRILL Model DA390D Note: The switch and other part configurations may differ from country to country.
ITEM NO. NO. USED 10 11 11 21 31 41 51 61 71 81 91 1 1 DESCRIPTION ‘rDM $to DESCRIPTION 12 13 14 15 16 17 18 19 20 21 Plane Bearing 5 Retaining Ring S-8 Spiral Bevel Gear 36 Ring 8 Ball Bearing 608L.
An important point after buying a device Makita DA390D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita DA390D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita DA390D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita DA390D you will learn all the available features of the product, as well as information on its operation. The information that you get Makita DA390D will certainly help you make a decision on the purchase.
If you already are a holder of Makita DA390D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita DA390D.
However, one of the most important roles played by the user manual is to help in solving problems with Makita DA390D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita DA390D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
