Instruction/ maintenance manual of the product DA3000DW Makita
Go to page of 16
Cordless Angle Drill Capacities SteelIWood Wood screw No load speed 700 Rimin 4 5 mm x 20 mm 13/16" x 3/4"1 10 mm 13/8"1 10 mm (3/8") MODEL DA3000D 10 mm (3/8") MODEL DA3000DW.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. 15. 16. 17. 18. 19. 20. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turn- ing it on. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) 25 AWG Size of Cord 18 1. 2. 3. 4. 5. 6. 7. 8. 9. IO. 11. 12. 50 100 150 18 18 16 SAVE THESE INSTRUCTIONS - This manual Do not operate charger with damaged cord or plug - replace them im- mediately.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge 0 Always switch off the tool before insertion or removal of the battery cartridge. 0 To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
Installing and removing bit CAUTION : Be sure that the battery cartridge has been removed from the tool. .To install the drill bit, place it in the chuck as far as it will go. Tighten the chuck collar by hand. Place the chuck key in each of three holes, and tighten clockwise.
Switch action oset the reversing switch lever just in front of the trigger switch to Forward (FWD) or Reverse (REV). Then pull the trigger to turn the tool ON and release it to turn it OFF. To change the direction of bit rotation, release the trigger, let the tool come to a complete stop, and then slide the switch lever to the opposite side.
0 Use tate Item Screwdriving cutting lubricant on the bit to facili- ! drilling if necessary. Nominal Diameter (mm) Bit No. Phillips bits Wood Screw 2.1 - 2.7 (3/32" - 1/8") 3.1 - 4.5 (1/8" - 3/16") Select your screws and nominal dia- meter with the chart on the right.
Hole .The hole on the heel of the tool is a con- venient way to carry it by a cord, hook or other means. Hole 1 10.
MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
ACCESS0 R I ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
0 Steel case Part NO. 181697-5 13.
Sep-19284 US 10 mm (3/8") CORDLESS ANGLE DRILL Model DA3000D Note: The switch and other part configurations may differ from country to country. 14.
MODEL OA30000 'ikM DESCRIPTION 11 21 31 41 51 61 71 81 Aug.-09-'84 US ,,!& DESCRIFTION 10 11 13 14 15 16 24 91 1 1 1 9 1 1 2 Orill Chuck 510 0 Ring 34 Plane Bearing 5 Housing Set IWnh It.
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita DA3000DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita DA3000DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita DA3000DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita DA3000DW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita DA3000DW will certainly help you make a decision on the purchase.
If you already are a holder of Makita DA3000DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita DA3000DW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita DA3000DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita DA3000DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
