Instruction/ maintenance manual of the product CURVED PLANER 1001 Makita
Go to page of 16
Curved Planer Planing width 82 mm 13~114") 82 mm (3-1/4") MODEL 1001 Planing depth No load speed Overall length Net weight 3 mm 1118"l 12,000 370 mm 1,14~1/2"1 6.
IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, includ- ing the following: READ ALL INSTRUCTIONS. 1. 2. 3. 4. 5. 6. 7.
17. STAY ALERT. Watch what you are doing, use common sense. Don’t operate tool when you are tired. 18. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function.
ADDITIONAL SAFETY RULES 1. Rags, cloth, cord, string and the like should never be left around the work 2. Avoid cutting nails. Inspect for and remove all nails from the workpiece be- 3. Handle the blades very carefully. 4. Be sure the blade installation bolts are securely tightened before operation.
Removing or installing planer blades WARNING : Always be sure that the tool is switched off and unplugged before removing or installing the blades. To remove the blades on the drum, un- screw the three installation bolts with the socket wrench. The drum cover comes off together with the blades.
Adjusting depth of cut Depth of cut may be adjusted by simply turning the knob on the front of the tool. Adjusting front base 1. To create a curved surface, loosen the wing nut. For a concave planing job, raise the front base; for a convex plan- ing job, lower the front base.
2. To create a flat surface, loosen the wing I nut after setting the tool on a level sur- face. Turn the front knob on the tool until the front base is perfectly level with the rear base. Then tighten the wing nut securely. Wing nut F Switch action To start the tool, simply pull the trigger.
NOTE : I *When beginning the planing of a flat shape, first take down the middle of the workpiece, gradually planing until the ultimate concave shape is achieved.
Sharpening planer blades Always keep your blades sharp for the best performance possible. Use the sharpening holder to remove nicks and produce a fine edge. First, loosen the two wing nuts on the holder and insert the blades (A) and (B), so that they contact the sides (C) and (D).
MAINTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing carbon brushes Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Jan 26-89 EN 82 mm (3-1/4") CURVED PLANER Model 1001 Note The switch, noise suppressor and other part configuratlons may differ from country to country 12.
MODEL 1001 z:, DESCRIPTION ITEM NO NO USED MACHINE ~ 1 2 3 4 5 6 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 21 28 29 30 31 32 4 1 1 1 1 1 1 2 1 1 1 6 2 4 2 1 1 1 I 2 1 1 2 I 2 2 4 1 1 1 .
14.
.
Makita Corporation 3-11 -8, Sumiyoshi-cho, Anjo, Aichi 446 Japan 883000A0 PRINTED IN JAPAN I991 -1 0 E.
An important point after buying a device Makita CURVED PLANER 1001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita CURVED PLANER 1001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita CURVED PLANER 1001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita CURVED PLANER 1001 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita CURVED PLANER 1001 will certainly help you make a decision on the purchase.
If you already are a holder of Makita CURVED PLANER 1001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita CURVED PLANER 1001.
However, one of the most important roles played by the user manual is to help in solving problems with Makita CURVED PLANER 1001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita CURVED PLANER 1001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
