Instruction/ maintenance manual of the product BO4550 Makita
Go to page of 8
Finishing Pad size 112mmxlOOmm (4-3/8" x 4") Sander No load speed lOPMl 14,000 Dimensions (L x W x H) 11 5 mm x 112 mm x 130 mm (4-112" x 4-318" x 5-118") Net weight 0.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
Attaching abrasive paper CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the paper. Raise the lever. Insert the paper end into the clamper, aligning the paper edges even and parallel with the sides of the base.
Switch action To start the tool, move the switch to the "ON" position. To stop, move the switch to the "OFF" position. Operation Hold the tool firmly. Turn the tool on and wait until it attains full speed. Then gently place the tool on the workpiece surface.
OPTIONAL ACCESSORIES The accessories listed in this manual are available at an extra cost from your Makita distributor or Makita factory service center. Service centers are listed on the warranty card packed with your tool. CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual.
FINISHING SANDER Model BO4550 Model BO45502 7.
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita BO4550 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita BO4550 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita BO4550 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita BO4550 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita BO4550 will certainly help you make a decision on the purchase.
If you already are a holder of Makita BO4550, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita BO4550.
However, one of the most important roles played by the user manual is to help in solving problems with Makita BO4550. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita BO4550 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center