Instruction/ maintenance manual of the product BHP456(LXPHOL*1) Makita
Go to page of 10
P 1/1 0 Model No. Description C ONCEPT AND MAIN APPLICA TIONS S pecification Dimensions: mm (") W idth (W) Height (H) Length (L) 206 (8-1/8) 79 (3-1/8) 234 (9-1/4) * 2 251 (9-7/8) * 3 BHP456 (LXPH01 *1 ) Cordless Hammer Driver Drill Battery Capacity of drill chuck: mm (") Capacity: mm (") Lock torque: N.
P 2 /1 0 R epair CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”. [1] NECESSAR Y REP AIRING T OOLS [2] LUBRICA TIONS [3] DISASSEMBL Y/ASSEMBL Y [3]-1.
P 3 /1 0 R epair [3] DISASSEMBL Y/ASSEMBL Y [3]-1. Drill chuck (cont.) DISASSEMBLING (2) Remove Drill chuck. ( Fig. 4 ) *Note: The rotational direction is viewed from operator .
P 4 /1 0 R epair [3] DISASSEMBL Y/ASSEMBL Y [3]-1. Drill chuck (cont.) (3) Tighten Drill chuck. ( Fig. 7 ) ASSEMBLING DISASSEMBLING Hex wrench 10 Fig. 7 Fig. 8 M6x22 Flat head screw 4. Open Keyless drill chuck fully , then drive M6x22 Flat head screw by turning counterclockwise* with Impact driver .
P 5 /1 0 R epair [3] DISASSEMBL Y/ASSEMBL Y [3]-2. Gear assembly and Motor section (3) Disassemble Gear assembly and Motor section. ( Fig. 9 ) Fig. 9 DISASSEMBLING 3. Unscrew nine 3x16 T apping screws, then remove Housing (R). 4. Remove the assembly of Motor section and Gear section.
P 6 /1 0 R epair [3] DISASSEMBL Y/ASSEMBL Y [3]-2. Gear assembly and Motor section (cont.) (4) Insert Armature into Yoke unit carefully and connect Motor section to Gear assembly. ( Fig. 11 ) (3) Put Leaf spring in place on the inside of Housing (L). ( Fig.
P 7 /1 0 R epair [3] DISASSEMBL Y/ASSEMBL Y [3]-2. Gear assembly and Motor section (cont.) (5) Engage the notch of Yoke unit with the projection inside of Housing (L) when mounting the assembly of Gear section and Motor section to Housing (L).
P 8 /1 0 R epair [3] DISASSEMBL Y/ASSEMBL Y [3]-3. Speed change lever Assemble Speed change lever to Gear assembly. ( Fig. 14 ) Mount F/R Change lever on Switch before assembling Housing (R) to Housing (L). ( Fig. 15 ) Fig. 14 Fig. 15 ASSEMBLING 1. Be sure to put two Compression springs on the back of Speed change lever .
C ircuit diagram P 9 /1 0 Fig. D-1 White Color index of lead wires' sheath Black Red Y ellow Brush holder complete Switch T erminal Connector FET (Field ef fect transistor) LED job light Line filter Line filter is not used for some countries.
W iring diagram P 1 0 /1 0 Fig. D-3 Fig. D-2 Brush holder complete Lead wire wiring of Brush holder complete Switch T erminal boss Connector Line filter W iring in Grip portion Fix Lead wires in these Lead wire holders. Place Line filter here if it is used.
An important point after buying a device Makita BHP456(LXPHOL*1) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita BHP456(LXPHOL*1) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita BHP456(LXPHOL*1) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita BHP456(LXPHOL*1) you will learn all the available features of the product, as well as information on its operation. The information that you get Makita BHP456(LXPHOL*1) will certainly help you make a decision on the purchase.
If you already are a holder of Makita BHP456(LXPHOL*1), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita BHP456(LXPHOL*1).
However, one of the most important roles played by the user manual is to help in solving problems with Makita BHP456(LXPHOL*1). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita BHP456(LXPHOL*1) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
