Instruction/ maintenance manual of the product 9561CV Makita
Go to page of 15
a 9561CV ___ Angle Grinder 2.800 - 10,5001min 289 mm (11 318”) 1 7 kg (3 7 Ibs) 518” 100 mm (4”) MODEL 9560CV 115 mm (4-112”) MODEL 9564CV 100 mm (4”) MODEL 9563CV 125 mm (5”) MODEL 9565CV 115 mm (4-112”) MODEL 9561CV 9565CV I 2,800 ~~ 10,50O/min.
GENERAL SAFETY RULES USAooz-i (For All Tools) WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area 1. Keep your work area clean and well lit.
11. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. 12. Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.
Specific Safety Rules USBOOS-l 1. Always use proper guard with grinding wheel. A guard protects operator from broken wheel fragments. 2. Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury.
SYMBOLS The followings show the symbols used for tool. v .................................... volts A .................................... amperes Hz .................................... herts ?., .................................... alternating current b .
FUNCTIONAL DESCRIPTION Switch action CAUTION: Before plugging in the tool, always check to see that the switch actuates properly and returns to the "OFF" position when the side of the switch lever is depressed. To start the tool, slide the switch lever to "I" position.
ASSEMBLY Installing and removing wheel cover Installing Pull the lever in the direction of the arrow after loosening the screw. Install the wheel cover on the bearing box by adjusting the convex of the wheel cover to Turn the wheel cover by 180 degrees.
Installing or removing the depressed center wheel CAUTION: Always be sure that the tool is switched off and unplugged before installing or removing the wheel. Once the edge of the wheel has been rounded off by use, the wheel may be worked in both A and B direction.
WARN1 NG : It should never be necessary to force the tool. The weight of the tool applied adequate pressure. Forcing and excessive pressure could cause dangerous when wheel breakage. Continued use of a worn-out wheel may result in wheel explosion and serious personal injury.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
@ Rubberpad 743036-3 743015-1 9565CV @ Abrasive discs (For abrasive disc) Part No. Part No I Diameter Per pkg 74203603 For Model 4' 794107-8 794108-8 142072-A-5 742073-A-5 742074-A-5 742075-A-5 7.
@ Cut-off wheel Pan No. Size Grit Wheels per pkg. For use 724104-110 4" x 3/32" x 5"' 36 10 For masonry and concrete. 724107-510 4" x 5/64" x 5B" 46 10 For steel and cast iron.
+ 57 56 55 54 50 48 G 47 @- 46 13.
ITEM NO. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 I6 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 PIN CAP COMPRESSION SPRING 8 GEAR HOUSING COMPLETE HEX. NUT M6 FLAT WASHER 6 SPIRAL BEVEL GEAR 11 LOCK SPRING 12 RETAINING RING S-12 BALL BEARING 6001LLB FLAT WASHER 12 GEAR HOUSING COVER FAN 57 ARMATURE ASSY INC.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known [to the State of Califomia] to cause cancer, birth defects or other reproductive harm.
An important point after buying a device Makita 9561CV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 9561CV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 9561CV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 9561CV you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 9561CV will certainly help you make a decision on the purchase.
If you already are a holder of Makita 9561CV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 9561CV.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 9561CV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 9561CV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
