Instruction/ maintenance manual of the product 8402VDW Makita
Go to page of 12
Cordless Hammer Drill Capacities Steel Wood Concrete Wood screw 10" 12" 10" 3.8mmx 20" 1318") 1112") 1318") (118" x 314") Equipped with electric brake MODEL 8402VD MODEL 8402VDW With Fast Charger Overall Net No load Blows per length weight speed IRPM) minute 260 mm 1.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) 25 50 100 AWG Size of Cord 18 18 18 150 16.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge .Always switch off the tool before insertion or removal of the battery cartridge. .To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
0 When YOU charge a new battery cartridge or a battery cartridge which has not been used for a long period, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it almost completely a couple of times.
Switch action yove the reversing switch lever to the W position for clockwise rotation or the Tool speed is increased by increasing pres- sure on the trigger. To start the tool, simply pull the trigger. Release the trigger to stop. When the reversing switch lever is in the neutral position, the tool will not start even if you pull the trigger.
CAUTION : .Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pres- sure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool.
RECYCLING THE BATTERY The way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. Ni-Cd To recycle a battery: 1. Remove the battery from the tool. 2. a).Take the battery to your nearest Makita Factory Service Center or b).
Tool holster Plastic tool case Part No 824401 -6 has some bits storage space Use holster to carry drill only after removing bit Also, keep the reversing switch lever in neutral position when carrying .
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita 8402VDW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 8402VDW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 8402VDW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 8402VDW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 8402VDW will certainly help you make a decision on the purchase.
If you already are a holder of Makita 8402VDW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 8402VDW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 8402VDW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 8402VDW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
