Instruction/ maintenance manual of the product 8400DW Makita
Go to page of 12
MODEL 84000 MODEL 8400DW With Fast Charger Capacities Steel Wood Concrete Wood screw 10” 12 mm 10” 3.8 mm x 20mm (318”) (112”) 1318”) (118” x 314”) INSTRUCTION MANUAL Net No load Blows per Overall speed (RPM] minute length weight 260 mm 1.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) AWG Size of Cord I. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge 0 Always switch off the tool before insertion or removal of the battery cartridge. To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
0 When you charge a new battery cartridge or a battery cartridge which has not been used for a long period, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it almost completely a couple of times.
Switch action Move the reversing switch lever to the "FWD" position for clockwise rotation or the "REV" position for counterclockwise. To start the tool, simply pull the trigger. Release the trigger to stop. When the re- versing switch lever is in the neutral posi- tion, the tool will not start even if you pull the trigger.
CAUTION: 0 Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pres- sure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool. .There is a tremendous force exerted on the tool/bit at the time of hole breakthrough.
. ACCESSOR I ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
o~t -06 'a7 us 10 mm (3/8") CORDLESS HAMMER DRILL Model 84000 Note: The switch and other part conflguratlons may differ from country to country 11.
MODEL 84000 ITEM NO. NO USED 18 19 20 21 22 23 24 25 27 28 29 30 31 32 DESCRIPTION I 1 1 1 1 1 1 1 1 1 1 1 1 a Oct -06 '87 US ':M AtD DESCRIPTION 10 11 12 13 17 MACHINE 61 71 81 91 1 1 1 1 1.
An important point after buying a device Makita 8400DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 8400DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 8400DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 8400DW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 8400DW will certainly help you make a decision on the purchase.
If you already are a holder of Makita 8400DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 8400DW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 8400DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 8400DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
