Instruction/ maintenance manual of the product 6OLODW Makita
Go to page of 14
Cordless Drills - Capacities No load speed Net weight Steel I Wood Wood screw 10 mm 1318") 600 Rimin. 1.1 kg (2.4 Ibs) 4.5 mm x 20 mm (311 6" x 314") 10 mm (318") MODEL 6010D 10 mm.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) AWG Size of Cord I. SAVE THESE INSTRUCTIONS - This manual 25 50 100 150 18 18 18 16 contains important safety and operating instructions for battery charger.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge *Always switch off the tool before inser- tion or removal of the battery cartridge. *To remove the battery cartridge, pull out the set plate on the bottom of the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
Bit installation & removal CAUTION : Always set the Forward-Reverse switch lever to NEUTRAL when installing, removing or adjusting bits or accessories. Chuck When installing a drill bit, notice that there are three holes in the chuck at which you must use the key for tighten- ing.
Switch action Move the reversing switch lever to the position for clockwise rotation or the )J& position for counterclockwise. To start the tool, simply pull the trigger.
*Pressing down too hard on the tool will not speed up the drilling. In fact, this undue pressure will only serve to damage the tip of your drill bit, decrease your drilling per- formance and shorten the service of the tool. *There is a tremendous force exerted on the tool/bit at the time of hole break through.
Grip .The grip shown on the right is recom- mended. However, grip the tool firmly with both hands when drilling a large- diameter hole. *The hole on the heel of the tool is a con- venient way to carry it by a cord, hook or other means.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Mar~-l1-'87 US 10 mm (318") CORDLESS DRILL Model 6010D Note: The switch and other part configurations may differ from country to country. 12.
MODEL 6010D Mar 11 87 EN 10 12 13 14 16 17 25 27 'Ff $:D DESCRIPTION ,",",, DESCRIPTION 1 1 1 1 7 1 1 1 11 21 31 41 51 61 71 81 91 Pan Head Screw M5x18 Drill Chuck S10 Gear Plane Bearin.
The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. 1 Ni-Cd To recycle the battery: 1. Remove the battery from the tool. 2. a). Take the battery to your nearest Makita Factory Service Center or b).
An important point after buying a device Makita 6OLODW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6OLODW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6OLODW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6OLODW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6OLODW will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6OLODW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6OLODW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6OLODW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6OLODW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
