Instruction/ maintenance manual of the product 6913DW Makita
Go to page of 15
Cordless Impact Driver CapaCltCeS MdchinC screw Standard bolt Hiuh tensile bolt I I Equipped with Electric Brake MODEL 6913D MODEL 6913DW With Fast Charger MODEL 6913DWG With Fast Charger INSTRUCTION .
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRl DG E Length of Cord (Feet) AWG Size of Cord 1. 2. 3. 4. 5. 6. 7. 8. 9. IO. 11. 12. 4 25 50 100 150 18 18 18 16 SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing the battery cartridge 0 Always switch off the tool before insertion or removal of the battery cartridge. DC1290 Approx. 60 min. 1200 1201 /I 201 A - 0 To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool.
CAUTION : .The fast charger Model DC1201 is for charging Makita battery cartridge. Never use it for other purposes or for other manufacturer's batteries. 0 When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it may not accept a full charge.
NOTE : If the bit is not inserted deep enough into the sleeve, the sleeve will not return to its original position and the bit will not be secured. In this case, try re-inserting the bit according to the instructions above. Switch action Tool speed is increased by increasing pres- sure on the trigger.
Operation The proper fastening torque may differ depending upon the kind or size of the screw, the type of material to be fastened, etc. The relation between fastening torque and fastening time is shown in the figures below.
Hold the tool firmly and place the point of the driver bit in the screw head. Apply for- ward pressure to the tool to the extent that the bit will not slip off the screw and turn the tool on to start operation. NOTE : 0 Use the proper bit for the head of the screw that you wish to use.
MAINTENANCE CAUTIO N : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Apr -20-'95 US CORDLESS IMPACT DRIVER Model 6913D Q Note: The switch and other part configurations may differ from country to country. 13.
MODEL 6913D ITEM NO. NO. USED DESCRIPTION Apr.-20-'95 US 'Fz $2D DESCRIPTION MACHINE 1 2 3 4 5 6 7 8 9 10 11 12 13 15 16 17 18 1 1 1 1 1 1 2 1 2 1 24 1 1 1 4 1 1 - Ring Spring 11 Flat Washer.
Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. I Ni-Cd To recycle the battery: 1. Remove the battery from the tool. 2. a). Take the battery to your nearest Makita Factory Service Center or b).
An important point after buying a device Makita 6913DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6913DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6913DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6913DW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6913DW will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6913DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6913DW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6913DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6913DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
