Instruction/ maintenance manual of the product 6404 Makita
Go to page of 11
Drill Steel 10 mm (3/8”) MODEL 6404 Variable speedlReversIng (RPM) Wood INSTRUCTION MANUAL DOUBLE INSULATION SPECIFICATIONS 10 mm (3/8”) I 15 mm (5/8”) 1 0 - 2,100 1 242 mm 19-9/16’,) I 1.4 kg (3.1 Ibs) * Manufacturer reserves the right to change specifications without notice.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don’t carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
ADDITIONAL SAFETY RULES 1. Always be sure you have a firm footing. 2. Hold the tool firmly. 3. Keep hands away from rotating parts. 4. When drilling into walls, floors or wherever "live" ele.
Installing or removing drill bit CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the bit. To install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand. Place the chuck key in each of the three holes and tighten clockwise.
CAUTION : 0 Before plugging in the tool, always check to see that the trigger switch actuates properly *Always check the direction of rotation before drilling. 0 Use the reversing switch lever only when the tool comes to a complete stop. Changing When not operating the tool, keep the reversing switch lever in the neutral position.
MA1 NTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. The tool will stop when the carbon brushes wear to a certain length. When this occurs, both carbon brushes should be replaced.
OPTIONAL ACCESSORIES The accessories listed in this manual are available at an extra cost from your Makita distributor or Makita factory Service center Service centers are listed on the warranty card .
2 1 DrillChuckS 10 10 3 1 Gear 11 4 1 BallBaaring6272 12 5 1 Housing Sol (With Ibm 17) 13 6 1 TerminslBaseCwnplsle 14 7 1 FIELDASSEMBLY 15 8 1 Bell Beadng626Z 16 Q 1 ARMATUREASSEMBLY 17 (with item 8-1.
May-l0-'88 US 10 mm (318") DRILL Model 6404 Note: The switch and other part configurations may differ from country to country. 11.
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita 6404 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6404 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6404 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6404 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6404 will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6404, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6404.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6404. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6404 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
