Instruction/ maintenance manual of the product 6211DWH Makita
Go to page of 15
Cordless Driver Drill Capacities Steel Wood Wood screw Machlne screw 10" 21" 6.4mmx55mm 6mm,1,4,,) (318'7 (13/16"1 1114" x 2-3/16") Equipped with Electric Brake MODEL 621.
I M PO RTA N T SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE I. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge 0 Always switch off the tool before insertion or removal or the battery cartridge. 0 To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool.
Installing or removing driver bit or drill bit CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the bit. Hold the ring and turn the sleeve counter- clockwise to open the chuck jaws.
Speed change To change the speed, slide the speed change lever to the "H" side for high speed or "L" side for low speed. To slide the speed change lever easily, pull the trigger slightly while pushing the speed change lever. Be sure that the speed change lever is set to the correct position before operation.
When driving wood screws, predrill pilot holes to make driving easier and to pre- vent splitting of the workpiece. See the chart. Nominal diameter af wood Screw lmml 3.1 (118") 3.5 19/64") 3.8 15/32") 4.5 111/64'l 4.8 13/16") 5.
Hook A hook is provided as a standard equip- ment. This hook is convenient for tem- porarily hanging the tool. To install the hook, first insert one end of the hook into one slot in the .tool body and then insert the other end into the other slot. Secure the hook with the screw.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELlABl LITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
CORDLESS DRIVER DRILL Model 6211D Note: The switch and other part configurations may differ from country to country. 13.
'LtM DESCRIPTION :tM ASD DESCRIPTION MACHINE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 10 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 7 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 - Na.
The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. 1 Ni-Cd I To recycle the battery: 1. Remove the battery from the tool. 2. a). Take the battery to your nearest Makita Factory Service Center i I or b).
An important point after buying a device Makita 6211DWH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6211DWH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6211DWH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6211DWH you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6211DWH will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6211DWH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6211DWH.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6211DWH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6211DWH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
