Instruction/ maintenance manual of the product 6170D Makita
Go to page of 12
Cordless Driver Drill No load speed IRPMt Capacities Steel/Wood I Wood screw 10 mm (3/8”) MODEL 6170D 10 mm (3/8”) MODEL 6170DW With Quick Charger Dimensions Net IL x W x HI weight INSTRUCTION MANUAL Input SPECIFICATIONS Output Charging time A.C. only 50 Hz - 60 Hz D.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don’t carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS I. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (11 battery charger, (2) battery, and (3) product using battery, 3.
ADDITIONAL SAFETY RULES FOR CHARGER AND TOOL 1. The Charger and the tool are specifically designed to work together. Do not attempt to charge any other cordless tool with this Charger. Do not attempt to charge the tool with any other charger. 2. Do not charge the tool when temperature is BELOW 10°C (5OOF) or ABOVE 45OC (113OF).
Charging Uncao the connector hole. Connect the charging plug to the charging connector, then plug in the charger to the CAUTION : The battery in your new tool is not fully charged. You will need to charge it before use. Do not operate the tool during charging.
Switch action Move the reversing switch lever to the "FWD" position for colckwise rotation or the "REV" position for counterclockwise. Tool speed is increased by increasing pres- sure on the tigger. To start the tool, simply pull the trigger.
Drilling operation Drilling in wood When drilling in wood, best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece. To prevent the bit from slipping when starting a hole, make an indentation with a center- punch and hammer at the point to be drilled.
Overload protector The overload protector automatically cuts out to break the circuit whenever heavy work is prolonged. Wait 20-30 seconds before resuming operation. MAINTENANCE CAUTION : Always be sure that the tool is switched off before attempting to perform inspection or maintenance.
ACCESSOR I ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
10 mm (318") CORDLESS DRIVER DRILL Model 6170D Mar - 27- 91 US Q Note. The switch and other part configurations may differ from country to country.
MODEL 61700 1 1 2 1 3 1 4 1 5 1 6 1 7 1 E 1 9 6 IO 1 Mar.-27-'91 US DrdlChuek SI0 Pan Head Screw M5x1E Gear Plans Bearing 5 Motmi Holder 6 Switch Housing R Tapping Screw 3x20 can 'LiM $:D DE.
An important point after buying a device Makita 6170D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6170D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6170D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6170D you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6170D will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6170D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6170D.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6170D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6170D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
