Instruction/ maintenance manual of the product 607LDW Makita
Go to page of 16
Cordless Driver Drill Cdpacitics - Stcel Wood Wood screw Equipped with Electric Brake MODEL 6071D MODEL 6071DW With Fast Charger MODEL 607lDWK No load speed Dimensions IL x W x HI Net weight With Fast.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) 25 50 100 AWG Size of Cord 18 18 18 1. SAVE THESE INSTRUCTIONS - This manual 150 16 9. Do not operate charger with damaged cord or plug - replace them im- mediately.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge 0Always switch off the tool before inser- tion or removal of the battery cartridge. .To remove the battery cartridqe, pull out j the set plate on the bottom if the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
Nominal diameter (mm) Bit No. Wood screw 2.1 - 2.7 (3/32" - 1/8") Selecting correct Phillips bit Use the chart to determine the best size driver bit for the size of screw that you wish to use. No. 2 3.1 - 4.5 (118"- 3/16") Selecting slotted bit Use a slotted bit that properly fits the screw slot.
to stop. CAUTION : Before inserting t..e battery cartridge into the tool, always check to see that the trigger switch actuates properly and returns to the "OFF" position when released. Reversing switch action This tool has a reversing switch to change the direction of rotation.
Bubble level This tool is equipeed with a bubble level to aid in holding the tool horizontally. Simply center the bubble in the sight window. 4.5 (11/64") Bubble level 7 2.9 - 3.2 (7/64 - 1 /8") Screwdriving operation Place the point of the driver bit in the screw head and apply pressure to the tool.
Drilling operation 0 Drilling in wood When drilling in wood, best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons, The accessories or attachments should be used only in the proper and intended manner.
0 Battery holster Holster holds extra battery Part No. 823033-3C 0 Steel carrying case Part No. 823087-3 (Steel case) Part No. 181372-3 (Plastic Case) 0 Tool holster has some bits storage space Use holster to carry drill only after removing bit. Part No.
10 mm (3/8") CORDLESS DRIVER DRILL Model 6071D Note: The switch and other part configurations may differ from country to country. MODEL 6071D 1 14.
MOUEL 6071U Apr 21 86 EN la 11 12 13 14 15 16 17 18 'EM A&, DESCRIPTION I 7 1 1 1 1 1 1 1 I:,'," ,,!& DESCRIPTION Drill Chuck S10 Pan Head Screw M5x18 Gear Plane Bearing 5 Motor.
f’ MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every hlakita tool is thoroughly inspected and tested before leaving the factory. It IS warranted to he free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita 607LDW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 607LDW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 607LDW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 607LDW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 607LDW will certainly help you make a decision on the purchase.
If you already are a holder of Makita 607LDW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 607LDW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 607LDW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 607LDW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
