Instruction/ maintenance manual of the product 6076DW Makita
Go to page of 14
Cordless Drill No load speed (RPMI i Capacities Steel /Wood Wood screw Equipped with Keyless Chuck and Electric Brake weight Dimensions IL x W x HI 10 mm (318”) MODEL 60761) 10 mm (3/8”) MODEL 6076DW With Quick Charger A.C. only 50 Hz - 60 Hz INSTRUCTION D.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
IMPOMANT SAFETY INSTRUCTIONS (FOR BATTERY CHARGER) 1. 2. 3. 4. 5. 6. 7. 8. 9. IO. 11. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. Before using battery charger, read all instructions and cautionary markings on (11 battery charger, (2) battery, and (3) product using battery.
ADDITIONAL SAFETY RULES FOR CHARGER AND TOOL 1. The Charger and the tool are specifically designed to work together. Do not attempt to charge any other cordless tool with this Charger. Do not attempt to charge the tool with any other charger. 2. Do not charge the tool when temperature is BELOW 10°C (5OOF) or ABOVE 45OC (113OFI.
Charging Connect the charging plug to the charging connector, then plug in the charger to the power receptacle. Charging takes 3 hours. CAUTION: *The battery in your new tool is not fully charged. You will need to charge it before use. Do not operate the tool during charging.
Holding tool Hold the tool as shown in the figure. When drilling a large diameter hole, hold the tool firmly with both hands. Switch action Move the reversing switch lever to the "FWD" position for clockwise rotation or the "REV" position for counterclockwise.
Drilling ope rat ion 0 Drilling in wood When drilling in wood, best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece.
MAINTENANCE CAUTION : Always be sure that the tool is switched off before attempting to perform inspection or maintenance. To remove the cover, push it in the direc- tion of the arrow while pressing down on the "OPEN" portion of the cover.
Recycling the battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1. Remove the battery from the tool. 2. (a) Take the battery to your nearest Makita Factory Service Center.
OPTIONAL ACCESSORIES The accessories listed in this manual are available at an extra cost from your Makita distributor or Makita factory service center. Service centers are listed on the warranty card packed with your tool. CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual.
Jan -14-’93 US 10 mm (3/8”) CORDLESS DRILL Model 6076D Note: The switch and other part configurations may differ from country to country. 12.
MODEL 6076D ,&, DESCRIPTION 10 Jan -14-'93 US ""0" SD DESCRIPTION 11 21 31 41 51 61 11 81 1 I Tapping Screw M3x20 Name Plate Housing Set IWith Item 171 Cwunleraunh Her Soohel S.
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita 6076DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6076DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6076DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6076DW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6076DW will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6076DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6076DW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6076DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6076DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
