Instruction/ maintenance manual of the product 601DST Makita
Go to page of 15
Battery-Powered Driver Drill Steel / Wood 10 mm (318") Equipped with Electric Brake 10 mm (3/8") MODEL 601D 10 mm (3/8") MODEL 6OlDST With Battery & Charger Wood screw (RPM) (L x W x H) weight 0.7 kg (311 6" x 3/4"1 - 750 (7-13116" x 1-13/16" x 6-5/32") (1.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don’t carry tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY & CHARGER Length of Cord (Feet) 25 AWG Size of Cord 18 I. SAVE THESE INSTRUCTIONS - This manual 50 100 150 18 18 16 9.
ADDITIONAL SAFETY RULES FOR BATTERY 1. Always charge the Makita battery 122 immediately after purchase. 2. Always recharge the Makita battery 122 after use. 3. Be sure to charge the Makita battery 122 for approx. one week every six months, when not using it for long periods.
ADDITIONAL SAFETY RULES FOR CHARGER 1. The Makita charger Model DC122 is specifically designed to charge only the Makita battery 121 or 122. Do not attempt to charge any other battery with this charger. 2. Handle the charger carefully. Do not drop or strike it.
ADDITIONAL SAFETY RULES FOR TOOL 1. This tool is specifically designed to drill in woods/metals or to drive wood 2. Always be sure you have a firm footing. 3. Always secure small workpieces in a vise or similar hold-down device. 4. Hold the tool firmly.
Charging Connect the battery to the charger using the adaptor cord. Then plug the charger into the power source. The charging light will illuminate and charging will begin. When the charg- ing light goes out at a certain time, the charging is complete.
Installing or removing the drill bit CAUTION : Always be sure that the tool is switched off and the batterv is disconnected from the tool before installing or removing the bit. To install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand.
Connecting the battery to the tool Connect the battery to the tool using the adaptor cord. To prevent the adaptor cord from being accidentally disconnected, hook the cord to the strain relief hook on the battery. Carrying the battery Hook the battery to your waist belt.
Screwdriving operation Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool slowly and then increase the speed gradually. Release the switch trigger just as the screw bottoms out. The electric brake will then stop the tool immediately, preventing the screw and/or bit from being damaged.
MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery is disconnected from the tool before attempting to perform inspection or maintenance.
Dec -19-’94 US 10 mm (3/8”) Model 601D BATTERY-POWERED DRIVER DRILL Note: The switch and other part configurations may differ from country to country.
1 1 Name Plate 10 2 5 Tapping Screw 4x20 11 12 3 1 Housing Set IWith Item 181 14 5 1 Lever 15 6 1 Trigger 7 1 Inlet 16 8 1 Motor I0.C. 12 V 1 11 9 1 Plane Bsarlng 5 18 4 1 Switch 13 14 1 Gear Complete.
Recycling the battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1) Remove belt from the battery 2) Ship or take battery to your nearest Makita Factory Service Center or Distributor that sells Makita lead batteries.
An important point after buying a device Makita 601DST (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 601DST yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 601DST - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 601DST you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 601DST will certainly help you make a decision on the purchase.
If you already are a holder of Makita 601DST, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 601DST.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 601DST. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 601DST along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
