Instruction/ maintenance manual of the product 6012HD Makita
Go to page of 16
Cordless Steel Wood Driver Dr i I I Wood screw Machine screw Nuts MODEL 6012HD MODEL 6012HDW With Fast Charger and Carrylng Case 6 5 mm 1114"l INSTRUCTION MANUAL 15 mm 5.1 mm x 55 mm 6 mm 261 mm 1.6 kg 1518") 13/16" x 2-118") 1114") I :Em) 1 400 ' lrloo 1 110-114") 1 13.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
13. DISCONNECT TOOLS. When not in use, before servicing, and when chang- ing accessories, such as blades, bits, cutters. 14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Length of Cord (Feet) 25 50 AWG Size of Cord 18 18 SAVE THESE INSTRUCTIONS - This manual 100 150 18 16 Do not operate charger with damaged cord or plug - replace them imme- diately.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5O0F1 or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge 0Always switch off the tool before insertion or removal of the battery cartridge. 0 To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
When you charge a new battery cartridge or a battery cartridge which has not been used for a long period, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it almost completely a couple of times.
Drill *Punch a small hole in the metal to pre- vent the bit from skitterring when start- ing to drill a hole. 0 Use drill machine oil on the bit to facilitate ing.
Screw Match vour bit to vour screw. Item I Nominal diameter (mm) Bit No. I Wood screw I Machine screw I I 2.1 - 2.7 M2 - M2.6 3.1 - 4.8 M3 - M5.5 Phillips bits Phillips bit No. 2-65 mm is standard equipped. Select your screws and nominal diameter with the chart on the right.
Speed changeover .To change the speed, turn the speed change knob 180" while the drill is run- ning. Be sure that the speed change knob is turned to the correct speed setting before you begin operation. See arrow indication. Use the right speed for the job.
*The hole on the heel of the tool is a con- venient way to carry it by a cord, hook or other means. I 11.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
0 Tool holster has some bits storage space. Use holster to carry drill only after removing bit. Also, keep the reversing switch lever in neutral position when carrying in the holster. Part No. 823033-36 Part No. 823033-3E (Genuine leather) 0 Tool carrying case Part No.
Feb 19 86 EN CORDLESS DRIVER DRILL Model 6012HD Note: The switch and other part configurations may differ from country to country 14.
MODEL 6012HD Feb-19-86 EN ED DESCRIPTION I;,'," DESCRIPTION MACHINE ______ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 1 1 I 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Pan .
The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. I Ni-Cd 1 To recycle the battery: 1. Remove the battery from the tool. 2. a). Take the battery to your nearest Makita Factory Service Center or b).
An important point after buying a device Makita 6012HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6012HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6012HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6012HD you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6012HD will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6012HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6012HD.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6012HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6012HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
