Instruction/ maintenance manual of the product 4093D Makita
Go to page of 14
Cleaner Rated voltage D.C. 9.6 V MODEL 40931) Capacity Dimensions (L x W x H) Net weight 1.3 kg (2.9 Ibsl 484mmx112mmx143mm (19-1116'' x 4-13/32" x 5-518") 500 mY INSTRUCTION MANUA.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNINGTO reduce the risk of fire, electric shock, or injury: 1. Do not leave appliance when the battery cartridge is installed.
ADDITIONAL SAFETY RULES 1. Read this instruction manual and the charger instruction manual carefully 2. Do not pick up wet materials, lit cigarettes or the like. 3. Stop operation immediately if you notice anything abnormal. 4. If you drop or strike the cleaner, check if carefully for cracks or damage before 5.
FUNCTIONAL DESCRIPTION Installing or removing battery cartridge *Always switch off the cleaner before insertion or removal of the battery cartridge. .To remove the battery cartridge, remove the rear cover from the cleaner by pushing it in the direction of the arrow and then withdraw the battery cartridge from the cleaner.
Switch action CAUTION: *Always be sure that the dust bag or paper filter is installed properly in the cleaner before use. Improper installation may allow dust to enter the motor, resulting in malfunction of the cleaner. *Always switch off the cleaner after each use to prevent damage to the cleaner and to lengthen the service life of the batteries.
Also empty out the dust inside the cleaner I .. itself. Failure to do so may cause the sponge filter to be clogged or the motor to be damaged. Installing dust bag Place the dust bag into the cleaner cavity. Insert the holder of the dust bag all the way into the slots in the cleaner cavitv.
Hook the front cover onto the front lip of I . the cleaner. Then close the front cover. NOTE: *When installing the paper filter, follow the *Always unfold a new paper filter before same procedures for the dust bag. installing it on the cleaner. OPERATION Cleaning (Suction) Nozzle Attach the nozzle to clean off tables, desks, furniture, etc.
Corner nozzle Fit on the corner nozzle for cleaning corners and crevices of the car or furniture. Corner nozzle + Extension wand (straight Pipe) In tight quarters where the cleaner itself cannot squeeze in, or in high places hard to reach, use this arrangement.
MAINTENANCE CAUTl ON : Always be sure that the cleaner is switched off and the battery cartridge is removed before carrying out any work on the cleaner.
Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. I Ni-Cd I To recycle the battery: 1. Remove the battery from the tool. 2. a). Take the battery to your nearest Makita Factory Service Center or b).
ACCESSORIES CAUTION These accessories or attachments are recommended for use with your Makita tool specified in this manual The use of any other accessories or attachments might present a risk of injury to persons The accessories or attachments should be used only in the proper and intended manner Extension wand Nozzle assembly Part No.
Dec-09-'99 us CORDLESS CLEANER Model 4093D Note: The switch and other part configurations may differ from country to country. 12.
MODFL 40930 IF,'," $:D DESCRIPTION Dec-09- 99 US 'zM & DESCRIPTION MACHINE - __ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 1 1 1 1 1 1 I 1 1 1 1 1 Tdpping Screw Pi 3x20 Houslnq Set IWiIh.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CON- SEQUENTIAL DAMAGES FROM THE SALE OR USE OF THE PRODUCT. THIS DISCLAIMER APPLIES BOTH DURING AND AFTER THE TERM OF THIS WARRANTY.
An important point after buying a device Makita 4093D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 4093D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 4093D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 4093D you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 4093D will certainly help you make a decision on the purchase.
If you already are a holder of Makita 4093D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 4093D.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 4093D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 4093D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
