Instruction/ maintenance manual of the product 4071D Makita
Go to page of 14
Cordless Cleaner Dimensions IL x W x H) 365 mm x 102 mm x 108 mm ! 114 318" x 4" x 4-1/4") Capacity 600 mi HANDY VAC II MODEL 4071D Net weight 0 6 kg I1 3 Ibs) INSTRUCTION MANUAL SPEC I.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNINGTO reduce the risk of fire, electric shock, or injury: 1. 2.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) 25 AWG Size of Cord 18 1. SAVE THESE INSTRUCTIONS -This 50 100 150 18 18 16 3.
1. 2. 3. 4. 5. 6. 7. ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). Do not attempt to use a step-up transformer, an engine generator or DC power receptacle.
Installing or removing battery cartridge I *Always switch off the tool before inser- tion or removal of the battery cartridge. To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
Switch action To start the tool, Release the trigger simply to StOD. pull the trigger. CAUTION : Before operation, always check to be sure that the filter and pre-filter are correctly in- stalled, or dirt and foreign matter will get into the motor and cause a failure.
Crevice tool Fit on the crevice tool attachment for cleaning corners and crevice tool of a car or furniture. Sand and other heavy items can be sucked up easily. Crevice tool + Extension wand In tight quarters where the cleaner itself cannot squeeze in, or in high places hard to reach, the extension wand may be used.
Dust disposal Raise the end of the cleaner so that the contents will not fall out. Then tap by hand the side of the capsule 4 or 5 times in order to detach materials from the pre- filter and filter and facilitate emptying. Tip end of cleaner (with suction hole) down and unscrew capsule as indicated in arrow direction.
Turn the pre-filter and pull it off toward you, emptying out the fine dust inside. Then take out the filter and tap out any adhering dust. After emptying out the cleaner, re-assemble in the order shown in the figure. 1. Fit filter snugly on all the way.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. From time to time wipe off the outside (housing) of the cleaner using a cloth dampened in soapy water.
ACC ESSO R I ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual The use of any other accessories or attachments might present a risk of injury to persons, The accessories or attachments should be used only in the proper and intended manner.
Jan.-08'87 EN CORDLESS CLEANER Model 4071D Note: The switch and other part configurations may differ from country to country. 12.
9 10 11 12 13 14 15 16 13 1 Hanger 6 Tapping Screw 3x20 1 Filter 1 Pm Filter 1 Stop Ring CS 3 1 Valve 1 Capsule 1 Housing Set IWith Item 31.
The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. I Ni-Cd I To recycle the battery: 1. Remove the battery from the tool. 2. a). Take the battery to your nearest Makita Factory Service Center or b).
An important point after buying a device Makita 4071D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 4071D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 4071D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 4071D you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 4071D will certainly help you make a decision on the purchase.
If you already are a holder of Makita 4071D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 4071D.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 4071D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 4071D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
