Instruction/ maintenance manual of the product Magneplanar CC3 Magnepan
Go to page of 7
MAGNEPLANAR® CC3 Instruction Manual White Bear Lake, Minnesota www.magnepan.com.
Magneplanar CC3 Owner's Manual 1. INTRODUCTION / GENERAL DESC RIPTION..................................................................... 3 2. CARTON CONTENTS.......................................................................................
1. INTRODUCTION / GENERAL DESCRIPTION Congratulations on your purchase of the Magne planar® CC3 Center Channel Loudspeaker. The Magneplanar CC3 was conceived and designed for perfectionists. The CC3 consists of a curved, two-way plan ar magnetic driver.
A) GENERAL The CC3 is designed for use on top of a TV, in or on top of a cabinet. For free- standing applications where the CC3 will be set on a speaker stand, call Magnepan for special instructions for this type of installation. The CC3 may be placed on top of a T V monitor as shown in Figure A.
C) INSTALLATION USING BUILT-IN “T” NUT S As shown below, there are 3 “T” nuts built int o the top and bottom of the CC3, at the designated locations.
Attenuation is accomplished by insertion of a simple, non-inductive resistor in series with the tweeter (see Figure B). Replace the jumper with the appropriate resistor to obtain the desired tweeter attenuation (typi cally 1 ohm for most rooms). The 1 ohm resistor provided will attenuate the tweet er 1 - 2dB.
10. SPECIFICATIONS System Description: Curved, two-way planar magnetic dipole loudspea ker Midrange Radiating Area: 155 Sq. In. Quasi Ribbon Tweeter Size: 31" x 2-1/2" Frequency Response: 80Hz to 20kHz +/- 3dB Recommended Power: See FAQ on web site at http://www.
An important point after buying a device Magnepan Magneplanar CC3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Magnepan Magneplanar CC3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Magnepan Magneplanar CC3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Magnepan Magneplanar CC3 you will learn all the available features of the product, as well as information on its operation. The information that you get Magnepan Magneplanar CC3 will certainly help you make a decision on the purchase.
If you already are a holder of Magnepan Magneplanar CC3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Magnepan Magneplanar CC3.
However, one of the most important roles played by the user manual is to help in solving problems with Magnepan Magneplanar CC3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Magnepan Magneplanar CC3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
