Instruction/ maintenance manual of the product ZV450MWB Magnavox
Go to page of 102
Owner's Manual T HANK YOU FOR CHOOSING M AGNAVOX . N EED HELP FAST ? R EAD YOUR Q UICK G UIDE AND / OR O WNER ' S M ANUAL FIRST FOR QUICK TIPS THAT MAKE USING YOUR M AGNAVOX PRODUCT MORE ENJOYABLE . I F YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE , YOU MAY ACCESS OUR ONLINE HELP AT HTTP :// WWW .
2E N 2E N PRECA UTIONS This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
3 EN 3 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español PRECA UTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference.
4E N 4E N PRECA UTIONS Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.
5 EN 5 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español PRECA UTIONS Servicing • Please refer to relevant topics on “TROUBLESHOOTING” on pages 90-94 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself.
6E N 6E N C ONTENT S Introduction PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURES . . . . . . . . . . . . . . .
7 EN 7 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español FEA TURES Symbol For Rec ording, Playing, and Editing For Pla yback only Descript.
8E N 8E N FUNC TIONAL O VERVIEW ( * ) The unit can also be turned on by pressing these buttons or insert a cassette tape. 1 2* 3 6 5 4 22 21 13 1 1 10 12 9 8* 7 20 19 18 17 16 15 14 23 1. Cassette compartment (VCR) Insert a cassette tape here. 2. OPEN/CLOSE A button (DVD)* Press to open or close the disc tray.
9 EN 9 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español FUNC TIONAL OVER VIE W Note • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
10 EN 10 EN FUNC TIONAL OVER VIE W ST ANDBY -ON DTV/TV ABC DEF .@/: JKL MNO GHI TUV WXYZ SP ACE CLEAR SETUP DISC MENU RETURN TITLE CHANNEL TIMER REC MODE VCR DVD AUD IO REC RAPID PLA Y CM SKIP D .
11 EN 11 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español FUNC TIONAL OVER VIE W 1. DISPLAY button (DVD/VCR) Press to display the display menu on or off. 2. DTV/TV button (DVD/VCR) Press to switch between digital TV mode (DTV) and analog TV mode.
12 EN 12 EN 1 6 5 42 3 7 Appears when data is being written on a disc. Appears when a disc is loaded on the disc tray. Appears when the PBC function is activated. (Video CD playback only. Refer to page 50.) Appears when the disc tray is closing. Appears when the disc tray is opening.
13 EN 13 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español ANTENNA CABLE C ONNEC TION This section describes how to connect your unit to an antenna, cable box, etc. * Once connections are completed, turn on the TV and begin initial setting.
14 EN 14 EN RF MODULA T OR C ONNEC TION rear of your RF modulator AUDIO IN ANT . IN TO T V L R CHANNEL 4 3 VIDEO IN Set channel 3 or 4 rear of this unit DVD DIGITAL AUDIO OUT AUDIO OUT S-VIDEO OUT IN .
15 EN 15 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español CONNECTION TO A CABLE / SATELLITE BOX 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below.
16 EN 16 EN Make one of the following connections, depending on the capabilities of your existing device. S-VIDEO IN DVD DIGIT AL AUDIO OUT AUDIO OUT S-VIDEO OUT COAXIAL L R Y P B /C B P R /C R COMPON.
17 EN 17 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español C ONNEC TION T O AN A UDIO SY STEM • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information.
18 EN 18 EN Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with [SOURCE] . ST ANDBY-ON DTV/TV ABC DEF .@/: JKL MNO GHI TUV WXYZ SP ACE CLEAR SETUP DISC MENU RETURN TITLE CHANNEL TIMER REC MODE VCR D VD AUDIO REC RAPID PLAY CM SKIP D.
19 EN 19 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen display give you the information on the loaded disc, the disc/file in playback, etc.
20 EN 20 EN GUIDE T O ON-SCREEN DISPLA Y S AND MENUS 1. Edit Disc Name: Allows you to rename the disc. 2. Disc Protect : Allows you to protect a disc from accidental editing or recording. 3. Erase Disc: (DVD+RW/DVD-RWonly) Allows you to erase all contents in the disc and format it.
21 EN 21 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español INITIAL SET TING You need to follow these steps when you turn on this unit for the first time. 1 Press [STANDBY-ON y y ]. Before: Turn the TV on.
22 EN 22 EN CHANNEL SET TING If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures. 1 Press [SETUP]. 2 Use [ K / L ] to select “Channel”, then press [OK]. “Channel” menu will appear.
23 EN 23 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español 1 Press [DTV/TV] to select the mode (DTV or TV) to/from which you want to add/delete channels. 2 Press [SETUP]. 3 Use [ K / L ] to select “Channel”, then press [OK].
24 EN 24 EN ANALOG 5 Select the channel number to add or delete. • Use [CHANNEL / ] to cycle through only the memorized channels. • Use [ { / B ] to cycle through all the channels including the ones not memorized. • Use [the Number buttons] to select a channel directly.
25 EN 25 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español SET TING THE CL OCK Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below.
26 EN 26 EN SET TING THE CL OCK 1 Press [SETUP]. 2 Use [ K / L ] to select “Clock”, then press [OK]. “Clock” menu will appear. 3 Use [ K / L ] to select “Daylight Saving Time”, then press [OK]. 4 Use [ K / L ] to select “ON (MAR - NOV)”, “ON (APR - OCT)” or “OFF”, then press [OK].
27 EN 27 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español TUNER SET TINGS Switching Analog Mode / Digital Mode You can easily switch the .
28 EN 28 EN TUNER SET TINGS 1 Press [AUDIO] to cycle through available audio languages. English 1/2 • When you press [AUDIO] , selected language will be displayed on the TV screen. • Every time you press [AUDIO] , the language will be switched. e.
29 EN 29 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español 1 Press [SETUP]. 2 Use [ K / L ] to select “Required Settings”, then press [OK]. “Required Settings” menu will appear. 3 Use [ K / L ] to select “TV Audio Select”, then press [OK].
30 EN 30 EN 1 Press [SETUP]. 2 Use [ K / L ] to select “Required Settings”, then press [OK]. 3 Use [ K / L ] to select “CC Style”, then press [OK]. Required Settings TV Aspect 4:3 Letter Box Video Input CC Style TV Audio Select Stereo V -Chip VCR DVD 4 Use [ K / L ] to select “DTV CC”, then press [OK].
31 EN 31 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español 1 Press [SETUP]. 2 Use [ K / L ] to select “Required Settings”, then press [OK]. 3 Use [ K / L ] to select “CC Style”, then press [OK].
32 EN 32 EN 6 Use [ K / L ] to select the item and switch the setting for each item you want to set, then press [OK]. • When “User Setting” is set to “ON”, you can set the following items. CC style set by “User Setting” will be displayed.
33 EN 33 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español INFORMA TION ON D VD REC ORDING Logo Attributes 8cm/12cm, single-sided, single layer disc Approx. max. r ecording time (SLP mode): 360 minutes (4.
34 EN 34 EN BEFORE REC ORDING Use this feature to make the unfinalized + VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Replace Disc Menu” set to “ON”, the title menu is automatically converted to our style.
35 EN 35 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español BASIC RECORDING & ONE-TOUCH TIMER RECORDING 1 Press [STANDBY-ON y y ]. Turn on the TV and be sure to select the input to which the unit is connected.
36 EN 36 EN BASIC REC ORDING & ONE- T OUCH TIMER REC ORDING 7 Press [STOP C ] to stop recording. The recorded title will appear in the title list. (Refer to “Guide to a Title List” on page 65.
37 EN 37 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español TIMER REC ORDING 1 Press [TIMER]. 2 Use [ K / L ] to select a program number, then press [OK]. Timer Programming VCR DVD 2. --- 3.
38 EN 38 EN 5 Use [ K / L ] to select analog (“- - -”) / digital (“DTV”) mode or external input (E1 / E2), then press [ B ]. Timer Programming VCR DVD 2. --- 3. --- 4. --- 1. JAN/01 11:57AM 10:57PM 12 DVD Date Start End CH Mode DVD VCR To record from external input (e.
39 EN 39 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español TIMER REC ORDING Checking, canceling, or correcting the timer programming information If the timer program did not complete correctly, the error number appears in the timer pro- gramming list.
40 EN 40 EN TIMER REC ORDING Hints for Timer Recording PROG. A PROG. B actual recording PROG. A PROG. B When the starting time is the same: A program set previously (PROG. A ) has priority . The rst 2 minutes (at the longest) will be cut o . PROG.
41 EN 41 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español OVER WRITING UNNECESSAR Y TITLE You can overwrite the existing title from the beginning. 1) Press [STANDBY-ON y y ]. Make sure that the TV input is set on the unit.
42 EN 42 EN OVERWRITING UNNECESSAR Y TITLE When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion, please check if there is no important title after the overwriting point.
43 EN 43 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español SET TINGS FOR AN EXTERNAL DEVICE front of this unit rear of this unit DVD DIGIT.
44 EN 44 EN SET TINGS FOR AN EXTERNAL DEVICE Recording from an External Device 1 Turn on the TV and press [STANDBY-ON y y ], and be sure to select the input of the TV to which the unit is connected. 2 When you want to record to the disc: Press [DVD]. Press [OPEN/CLOSE A ] to open the disc tray.
45 EN 45 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español SET TING A DISC T O PRO TEC T 1 Press [SETUP]. 2 Use [ K / L ] to select “Disc Edit”, then press [OK]. 3 Use [ K / L ] to select “Disc Protect OFF ON”, then press [OK].
46 EN 46 EN PLA Y ING THE DISCS IN O THER DVD PLA Y ERS Finalizing a Disc 1 Press [SETUP]. 2 Use [ K / L ] to select “Disc Edit”, then press [OK]. “Disc Edit” menu will appear. 3 Use [ K / L ] to select “Finalize”, then press [OK]. 4 Use [ K / L ] to select “ Yes”, then press [OK].
47 EN 47 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español PLA YING THE DISCS IN O THER DVD PLA YERS 1 Press [SETUP]. 2 Use [ K / L ] to select “Recording”, then press [OK]. “Recording” menu will appear.
48 EN 48 EN DUBBING MODE 1 Press [SETUP]. 2 Use [ K / L ] to select “Recording”, then press [OK]. “Recording” menu will appear. 3 Use [ K / L ] to select “Dubbing Mode”, then press [OK]. Selection menu will appear. You can copy a DVD to a cassette tape or copy a cassette tape to a DVD.
49 EN 49 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español 4 Use [ K / L ] to select “VCR DVD”, then press [OK]. Dubbing Mode DVD VCR VCR DVD VCR DVD 5 Press [SETUP] to exit. Press [VCR].
50 EN 50 EN INFORMA TION ON PLA Y BA CK Before you play back DVD, read the following information. This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below.
51 EN 51 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español BASIC PLA Y BA CK Direct Playback 1 Press [STANDBY-ON y y ]. Turn on the TV and be sure to select the input to which the unit is connected.
52 EN 52 EN BASIC PLA YBA CK 1 Press [STANDBY-ON y y ]. Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD]. 2 Press [OPEN/CLOSE A ] to open the disc tray and insert your disc with its label facing up. Align the disc to the disc tray guide.
53 EN 53 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español 4 Use [ K / L ] to select a desired title, then press [OK].
54 EN 54 EN BASIC PLA YBA CK Playing Back a CD-RW/-R with MP3 Files Note • The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck. • Files whose extension is other than “.mp3(MP3)” will not be listed. • Some unplayable folders or files may be listed due to the recording status.
55 EN 55 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español BASIC PLA YBA CK Using the Title / Disc Menu DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc.
56 EN 56 EN SPECIAL PLA Y BA CK You can skip TV commercials to enjoy the recorded programs without interrupting. Press [DVD] first. During playback, press [CM SKIP]. Normal playback will start at 30 seconds ahead from the point you press [CM SKIP] . Every time you press [CM SKIP] , the searching point will be extended by 30 seconds ahead.
57 EN 57 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español SPECIAL PLA YBA CK Rapid playback function is available only during playback.
58 EN 58 EN SPECIAL PLA YBA CK Zoom Note • When selecting a smaller factor than the current one, the zoom area will not be displayed. • To exit the zoom menu, press [DISPLAY] again at step 1. • To cancel the zoom function, select “x1.0” using [ K / L ] , then press [OK] .
59 EN 59 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español SEARCH Using [PREV H ] / [NEXT G ] Press [DVD] first. 1) During playback, press [NEXT G ] to skip the current title or chapter and move to the next.
60 EN 60 EN Press [DVD] first. 1) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [OK]. e.g.) DVD-video DVD-Video 1 1 0:00:00 e.g.) audio CD Audio CD 1 0:00:00 The number next to will be highlighted. To move to the number next to , press [ B ] .
61 EN 61 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español REPEAT / RANDOM / PROGRAM PLAYBACK Repeat Playback Random Playback Available repeat function may vary depending the discs. Press [DVD] first.
62 EN 62 EN Program Playback Note • To erase tracks you selected, press [CLEAR] at step 4. • You can make program settings up to 50 tracks. • To cancel program playback, press [STOP C ] twice during program playback. “Playmode OFF” appears on the TV screen.
63 EN 63 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español DVD-video may have subtitles in 1 or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages anytime during playback.
64 EN 64 EN You can enjoy stereophonic virtual space through your existing 2 channel stereo system. Press [DVD] first. 1 ) During playback, press [DISPLAY]. 2) Use [ { / B ] to select , then press [OK]. DVD-Video 1 1 0:00:00 3) Use [ K / L ] to select “OFF”, “Type 1” or “Type 2”, then press [OK].
65 EN 65 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español INFORMA TION ON DISC EDITING Guide to a Title List Editing Discs Title list allows you to check the titles recorded on the disc easily.
66 EN 66 EN EDITING DISCS 3 Use [ K / L ] to select “Edit”, then press [OK]. 1 2 3 NOV/21/07 11:00 AM CH12 SP NOV/21/07 0:20:44 Overwrite NOV/22/07 11:35 AM CH13 EP NOV/22/07 0:10:33 EMPTY TITLE 1:37:52 SP(2Hr) SP (2Hr) Edit Play 4 Use [ K / L ] to select “Title Delete”, then press [OK].
67 EN 67 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español EDITING DISCS Putting Names on Titles 4 Use [ K / L ] to select “ Yes”, then press [OK]. Edit Title Name No Ye s MY F AV ORITE 6 0:00:59 The name you entered will be activated for the title.
68 EN 68 EN EDITING DISCS Setting Chapter Marks 1 Follow steps 1 to 3 in “Deleting Titles” on page 66 to display “Edit” menu. 2 Use [ K / L ] to select “Chapter Mark”, then press [OK]. Submenu will appear. 3 Press [PLAY B ] and then [PAUSE F ] to decide the point at which you will create a new chapter mark.
69 EN 69 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español EDITING DISCS Clearing Chapter Marks 1 Follow steps 1 to 3 in “Deleting Titles” on page 66 to display “Edit” menu. 2 Use [ K / L ] to select “Chapter Mark”, then press [OK].
70 EN 70 EN EDITING DISCS Clearing Chapter Marks (cont’d) To delete all chapter marks: 1 Follow steps 1 to 3 in “Deleting Titles” on page 66 to display “Edit” menu. 2 Use [ K / L ] to select “Chapter Mark”, then press [OK]. Submenu will appear.
71 EN 71 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español EDITING DISCS Hiding Chapters 1 Follow steps 1 to 3 in “Deleting Titles” on page 66 to display “Edit” menu. 2 Use [ K / L ] to select “Current Chapter”, then press [OK].
72 EN 72 EN EDITING DISCS Setting Pictures for Thumbnails 1 Follow steps 1 to 3 in “Deleting Titles” on page 66 to display “Edit” menu. 2 Use [PREV H ], [NEXT G ], [ E ], [ D ], [PAUSE F ] and [PLAY B ] to decide the picture you want to select as a thumbnail.
73 EN 73 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español EDITING DISCS Dividing a Title 1 Follow steps 1 to 3 in “Deleting Titles” on page 66 to display “Edit” menu.
74 EN 74 EN Putting Name on Disc Press [STOP C ] if you are playing back a disc. 1 Press [DVD] first. Press [SETUP]. 2 Use [ K / L ] to select “Disc Edit”, then press [OK].
75 EN 75 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español EDITING DISCS Setting or Releasing Disc Protect 1 Follow steps 1 to 2 in “Putting Name on Disc” on page 74 to display “Disc Edit” menu.
76 EN 76 EN EDITING DISCS Setting or Releasing Disc Protect (cont’d) Releasing disc from protect: 1 Follow steps 1 to 2 in “Putting Name on Disc” on page 74 to display “Disc Edit” menu. 2 Use [ K / L ] to select “Disc Protect ON OFF”, then press [OK].
77 EN 77 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español EDITING DISCS Erasing Disc Press [STOP C ] if you are playing back a disc. 1 Follow steps 1 to 2 in “Putting Name on Disc” on page 74 to display “Disc Edit” menu.
78 EN 78 EN EDITING DISCS Making Edits Compatible Press [STOP C ] if you are playing back a disc. 1 Follow steps 1 to 2 in “Putting Name on Disc” on page 74 to display “Disc Edit” menu. 2 Use [ K / L ] to select “Make Edits Compatible”, then press [OK].
79 EN 79 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español LIST OF SET TING The following table is the contents which you can set and the default setting. Refer to the following table for useful operation.
80 EN 80 EN Setup Items (highlight is the default) Contents Playback Language Disc Menu Page 84 English French Spanish Other Set the language for disc menu. Audio Page 84 Original English French Set the language for audio. Subtitle Page 84 OFF English French Set the language for subtitles.
81 EN 81 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español Press [STOP C ] if you are playing back a disc. 1 Press [SETUP]. 2 Use [ K / L ] to select “Required Settings”, then press [OK].
82 EN 82 EN Press [STOP C ] if you are playing back a disc. 1 Press [SETUP]. 2 Use [ K / L ] to select “Playback”, then press [OK]. Setup Playback Display Recording Clock Channel Disc Edit Required Settings 3 Use [ K / L ] to select a desired item, then press [OK].
83 EN 83 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español 1 Disc Audio (Default: Digital Out) Choose the appropriate audio setting for your external device. It will only affect a disc playback.
84 EN 84 EN Still Mode (Default : Auto) Select “Auto” usually. Use [ K / L ] to select a setting, then press [OK]. Video - Still Mode Field Frame Auto DVD Your setting will be activated. Auto : Optimum resolution setting (“Field” or “Frame”) will be selected.
85 EN 85 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español 4 Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback.
86 EN 86 EN 3 Use [ K / L ] to select a desired item, then press [OK]. Display Angle Icon ON Screen Saver 10 min utes FL Dimmer Bright OSD Language English VCR DVD Selection menu will appear. OSD Language (Default : English) Set the language for the on-screen display.
87 EN 87 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español V CR FUNC TIONS Playback Recording 1) Press [STANDBY-ON y ] on the remote control or the front panel of the unit.
88 EN 88 EN VCR FUNCTIONS One-touch Timer Recording (OTR) Index Search This feature allows you to set the recording length simply by pressing [REC I ] on the remote control. Press [VCR] first. 1) During normal recording, press [REC I ] to begin the one-touch timer recording.
89 EN 89 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español VCR FUNCTIONS Time Search Other Operations This feature allows you to go to a specific point on a cassette tape by entering the exact amount of time you wish to skip in order to reach the point.
90 EN 90 EN TROUBLESHOO TING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
91 EN 91 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español TROUBLESHOO TING Symptom Remedy D V D There is no picture. • If the main menu appears on the TV screen, press [RETURN] to exit. • Check if the progressive scan mode is set correctly according to your TV (page 83).
92 EN 92 EN TROUBLESHOO TING Symptom Remedy D V D “Repairing” appears on the TV screen. Repairing • If there is a power failure or unplugging during recording, finalizing, formatting or editing (even after “Repairing” disappears), a repairing process will begin automatically just after turning the unit on again.
93 EN 93 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español TROUBLESHOO TING Error message Cause Solution Disc Error — Please eject the disc. — Playback feature may not be available on this Disc.
94 EN 94 EN TROUBLESHOO TING Frequently Asked Questions – Can I record to CD-RW/-R? No, this unit records only DVD. – Can I play back DVD-video that is bought in another country? Possible when the region code of the disc is 1 and All. – Can I connect the unit to my PC? No, you cannot control the unit by PC.
95 EN 95 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español LANGU A GE C ODE Language Code Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian.
96 EN 96 EN Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. Aspect Ratio The width of a TV screen relative to its height.
97 EN 97 EN Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español SPECIFICA TIONS Note • The specifications and design of this product are subject to change without notice.
98 ES ESP AÑOL Logotipo Atributos Disco de 8 cm / 12 cm, un solo lado , una sola capa Tiempo de grabación máx. apr ox. (modo SLP): 360 minutos (4,7 GB) (para 12 cm) 108 minutos (1,4 GB) (para 8 cm).
Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español 99 ES ESP AÑOL DVD DIGITAL AUDIO OUT AUDI O OUT S-VIDEO OUT IN COAXIAL L R L Y P B /C B P .
100 ES ESP AÑOL Cuando usted encienda este aparato por primera vez necesita seguir estos pasos. 1 Presione [STANDBY-ON y y ]. Antes: Encienda el televisor. Seleccione la entrada a la cual está conectado el aparato. 2 Utilice [ K / L ] para seleccionar su idioma deseado, y luego presione [OK] para establecerlo.
Recording Playback Editing Introduction Connections Basic Setup Function Setup VCR Functions Others Español 101 ES 1 Abra la bandeja de discos. 2 Inserte un disco. 3 Comience a reproducir. 4 Detenga la reproducción. 1 Presione [TIMER]. 2 Utilice [ K / L ] para seleccionar un número de programa, y luego presione [OK].
Printed in China E9C80UD 1VMN23373A ★★★ LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.
An important point after buying a device Magnavox ZV450MWB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Magnavox ZV450MWB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Magnavox ZV450MWB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Magnavox ZV450MWB you will learn all the available features of the product, as well as information on its operation. The information that you get Magnavox ZV450MWB will certainly help you make a decision on the purchase.
If you already are a holder of Magnavox ZV450MWB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Magnavox ZV450MWB.
However, one of the most important roles played by the user manual is to help in solving problems with Magnavox ZV450MWB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Magnavox ZV450MWB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
