Instruction/ maintenance manual of the product VRZ242AT Magnavox
Go to page of 52
Video Cassette Recorder VRZ242AT Owner’s Manual TM IMPORTANT! Return Your Warranty Registration Card Within 10 Days. See Why Inside. VRZ242 LAYOUT 4/9/99 9:24 AM Page 1.
Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Introduction 3 Features • High Quality (HQ) System • Automatic Channel Setup • On-Screen Displays in English or Spanish • Display Panel • Automatic Tracking Adjustment • One-Touch Recordin.
4 Table of Contents Setting Up Your VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
● Use only tapes with the mark. ● Remove any light adhesive stick-on notes from the video cas- sette tape before putting the tape in the VCR. Removable labels can jam the VCR. ● Periodic maintenance is required to maintain your VCR’s excel- lent performance.
VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT OR VIDEO IN OUT CH3 CH4 AUDIO OUT IN 75 V ANT / CABLE OR 75 V ANT / CABLE 6 Hookups Without a Cable Box / Direct Broadcast System The basic VCR/TV connection – antenna/cable to VCR to TV – is shown below. If you have a Cable Box or a Direct Broadcast System, please see pages eight-nine.
VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT ANT CH 4 or CH 3 VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT CH3 / CH4 Switch CH3 CH4 VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT 75 V ANT / CABLE 75 V ANT / CABLE VIDEO IN O.
8 Hookups With a Cable Box / Direct Broadcast System There are two ways to connect your Cable Box/DBS to the VCR. With this connection: ● You may view any channel. ● You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR.
Hookups With a Cable Box / Direct Broadcast System (cont’d) 9 VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT IN OUT 75 V ANT / CABLE With this connection: ● You may watch one channel while recording another.
10 Hookups With a Stereo TV VIDEO IN OUT CH3 CH4 AUDIO OUT IN ANT antenna or cable to ANT(enna) IN Jack Video Cable Audio Cable VIDEO (yellow) and AUDIO (white) OUT Jacks Audio and Video IN Jacks on TV ● Audio and Video cables are not supplied. 1 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.
1 Press the VCR button, then the POWER button. The VCR light and the PWR. (power) light will appear on the display panel. 2 Turn on the TV. Set it to the same channel as the CH3/CH4 switch on the back of the VCR.
12 Automatic Channel Setup 2 Press the MENU button . SELECT op CHOOSE B → PROGRAM VCR SET UP TUNER SET UP SET CLOCK TO END PUSH EXIT • You can not enter the TUNER SET UP menu when you are in Line Input mode (channel 001 or 002). When you select channel 001 or 002, AV REAR or AV FRONT will appear on-screen briefly.
Automatic Channel Setup (cont’d) 13 Adding/Deleting Channels 2 Press the MENU button . SELECT op ADD/DELETE B 124 DELETED 125 DELETED 1 → DELETED 2 ADDED 3 ADDED TO END PUSH EXIT 3 Press the PLAY/ o button or the STOP/ p button to select TUNER SET UP, then press the F.
14 Automatic Channel Setup (cont’d) Reviewing Memorized Channels 4 Press the PLAY/ o button or the STOP/ p button to select CH MEMORY REVIEW, then press the F.FWD/ B button. A list of programmed channels will appear on-screen. ● If all the programmed channels don’t fit on the screen, press the F.
Setting the Clock 15 Follow the steps below to set your VCR’s clock. Make sure: ● The VCR is on and the VCR light appears on the display panel. (If it does not, press the VCR/TV button once.) ● You make each entry within 60 seconds of the previous entry.
2 Press the MENU button. 3 Press the PLAY/ o button or the STOP/ p button to select SET CLOCK, then press the F.FWD/ B button. 5 Press the STATUS/EXIT button.
Language Selection 17 2 Press the MENU button . Follow the steps below to change the language of the on-screen displays. 3 Press the PLAY/ o button or the STOP/ p button to select VCR SET UP, then press the F.FWD/ B button. 4 Press the PLAY/ o button or the STOP/ p button to select LANGUAGE, then press the F.
REW PLAY POWER VCR PLUS+ /ENTER SPEED VCR TIME SEARCH TV MUTE CBL/DBS VCR/TV CHANNEL VOLUME REC/OTR STATUS/EXIT MEMORY SLOW PAUSE/STILL MENU CLEAR EJECT STOP F.FWD 1 2 3 4 5 6 7 8 9 0 +100 18 Setting the Remote to Operate a TV • The remote control may only operate some features of your TV.
REW PLAY POWER VCR PLUS+ /ENTER SPEED VCR TIME SEARCH TV MUTE CBL/DBS VCR/TV CHANNEL VOLUME REC/OTR STATUS/EXIT MEMORY SLOW PAUSE/STILL MENU CLEAR EJECT STOP F.FWD 1 2 3 4 5 6 7 8 9 0 +100 • The remote control may only operate some features of your Cable Box or DBS.
20 Remote Control Buttons POWER Button Press to turn on or off the VCR, TV, Cable Box, or Direct Broadcast System. (You must first press the VCR, TV, or CBL/DBS button.) MENU Button Press to access the VCR menu. Or, if you have a Magnavox TV, press the TV button, then press the MENU button to display the TV menu.
Remote Control Buttons (cont’d) 21 STOP/ p Button Press to stop the tape. Press to select an item in the VCR menu. Or, if you have a Magnavox TV, press when in TV mode to move down one row or selection in the TV menu. PAUSE/STILL Button During recording, press to pause the recording.
SELECT op CHOOSE B → STATUS [ON] COUNTER ONLY [OFF] TO END PUSH EXIT 22 On-Screen Status Displays • If the channel you select has no broadcast, the screen will become solid blue. • You may not access a status display when viewing a still picture, during slow motion playback, or when the F.
VCR Display Panel 23 Cassette Compartment Insert a tape here. VCR Light This light appears when the VCR is in VCR position. This light does not appear when the VCR is in TV position. REC(ord) Light This light appears during a record- ing. It flashes when a recording is paused.
24 Front Panel PAUSE Button While recording, press to pause the recording. Press again to resume recording. Details are on page 27. You can not pause a One-Touch Recording. During tape playback, press to freeze the picture. Press again to resume playback.
AUDIO IN Jack Connect a cable coming from the AUDIO OUT Jack of a camcorder, another VCR, or an audio source here. Details are on page 38. VIDEO IN Jack Connect a cable coming from the VIDEO OUT Jack of a cam- corder, another VCR, or an audio-visual source (laser disc player, video disc player, etc.
26 Playing • If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button.) Press the VCR button, then press the PLAY/ o button.
REW PLAY POWER VCR PLUS+ /ENTER SPEED VCR TIME SEARCH TV MUTE CBL/DBS VCR/TV CHANNEL VOLUME REC/OTR STATUS/EXIT MEMORY SLOW PAUSE/STILL MENU CLEAR EJECT STOP F.FWD 1 2 3 4 5 6 7 8 9 0 +100 Read and follow the steps below to record a television program.
REW PLAY POWER VCR PLUS+ /ENTER SPEED VCR TIME SEARCH TV MUTE CBL/DBS VCR/TV CHANNEL VOLUME REC/OTR STATUS/EXIT MEMORY SLOW PAUSE/STILL MENU CLEAR EJECT STOP F.FWD 1 2 3 4 5 6 7 8 9 0 +100 1 Start a recording. (See page 27.) 28 Recording One Channel/Watching Another • If your VCR remote control does not operate your TV, see page 18 for details.
REW PLAY POWER VCR PLUS+ /ENTER SPEED VCR TIME SEARCH TV MUTE CBL/DBS VCR/TV CHANNEL VOLUME REC/OTR STATUS/EXIT MEMORY SLOW PAUSE/STILL MENU CLEAR EJECT STOP F.FWD 1 2 3 4 5 6 7 8 9 0 +100 One-Touch Recording 29 2 Press the CHANNEL o / p buttons or the Number but- tons to select the channel you want to record.
DAILY PROGRAM (MON-FRI) PROGRAM -1 2 3 4 5 6 7 8- SELECT PROGRAM NUMBER TO END PUSH EXIT 30 Timer Recording Follow the steps below to program your VCR to record TV pro- grams while you’re away from home. The VCR will turn itself on, record, and turn itself off automatically.
REW PLAY POWER VCR PLUS+ /ENTER SPEED VCR TIME SEARCH TV MUTE CBL/DBS VCR/TV CHANNEL VOLUME REC/OTR STATUS/EXIT MEMORY SLOW PAUSE/STILL MENU CLEAR EJECT STOP F.
ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP SP=1 LP=2 SLP=3 TO CORRECT PUSH CLEAR TO END PUSH EXIT 32 Timer Recording (cont’d) 8 Press the Number 1 button to record in SP speed, the Number 2 button to record in LP speed, or the Number 3 button to record in SLP speed.
Timer Recording (cont’d) 33 6 Repeat steps 1 - 4 to make sure you have cleared the cor- rect timer recording. • CLASH may flash on-screen when you finish setting a timer recording. This means that the timer recording you just programmed and another timer recording overlap.
34 Setting Up the VCR Plus+ Programming System 1 First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR Plus+ programming system to work properly.
Setting Up the VCR Plus+ Programming System (cont’d) 35 2 Now, compare the channel numbers you have written in the VCR PLUS+ CH. and CABLE/TV CH. columns. For stations whose VCR Plus+ and Cable/TV channels do not match, you must tell the VCR the VCR Plus+ and Cable/TV channel numbers by following steps 3 - 7.
VCR PLUS+ PROG. PLUS CODE : – – – – – – – – TO END PUSH EXIT 36 Timer Recording With the VCR Plus+ Programming System Follow these steps to set a timer recording with the PlusCode programming numbers in your TV guide. Before you begin: ● Set up the channels at the VCR (page 12).
Timer Recording With the VCR Plus+ Programming System (cont’d) 37 • If the time for a timer recording comes up during a One-Touch Recording, the OTR has priority. • To stop a started timer recording, press the STOP/EJECT button on the VCR. • If the power fails for more than one minute, programmed timer record- ings may be lost.
1 Make the connections shown above. 38 Rerecording (Tape Duplication) 3 VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.
Repeat Play 39 Follow the steps below to make the VCR play a tape over and over. 2 Press the MENU button. 3 Press the PLAY/ o button or the STOP/ p button to select VCR SET UP, then press the F.FWD/ B button. 5 Press the F.FWD/ B button so that ON appears beside REPEAT PLAY.
40 Time Search Follow the steps below to program the VCR to search forward or backward on a tape a specific length of time. There must be a tape in the VCR. 2 Press the TIME SEARCH button. 3 Within 10 seconds, use the Number buttons to enter the desired length of time you want to skip forward or back- ward.
Real-Time Counter Memory 41 • The MEMORY button does not function if REPEAT PLAY is set to ON. Details are on page 39. • To erase a real-time counter memo- ry, press the MEMORY button until the M disappears from the screen. • You may only set the real-time counter to zero at one location at a time.
42 Special Effects Playback Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F.FWD/ B button or the REW(ind)/ { button. A fast forward or reverse picture search will begin. 2 To return to playback, press the PLAY/ o button.
Automatic Operation Features 43 The following playback features will always operate. Automatic Playback When you put a tape in the VCR, the power will come on auto- matically.
If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call.
TV programs cannot be watched normally. • Put the VCR in TV position. (Press the VCR/TV button so that the VCR light disappears from the display panel. For details see page 24.) • Check the connections between the VCR, TV, antenna/cable, and Cable Box/Direct Broadcast System (if applicable).
46 Glossary AUDIO IN/OUT Jacks: jacks located on the front and back of the VCR which are used to record audio from another source (IN) or to send audio to another source (OUT). Automatic Channel Setup: process in which the VCR memo- rizes all available channels.
Specifications 47 Video Heads Four heads Video Signal EIA standards; NTSC color Antenna VHF/UHF – 75 ohm external antenna terminal VHF Output Signal Channel 03 or 04 (switchable) 75 ohms unbalanced Power Requirement 120V AC; 60Hz Power Consumption 16W Operating Temperature 41°F (5°C) to 104°F (40°C) Relative Humidity 10% to 80% Weight 5.
VIDEO CASSETTE RECORDER 90 Days Free Labor/One Year Parts Exchange. This product must be carried in for repair. WHO IS COVERED? You must have proof of purchase to receive warran- ty service. A sales receipt or other document show- ing that you purchased the product is considered proof of purchase.
ac power cord .................................25 accessories .......................................52 ant(enna) in jack ...................6-10, 25 audio in/out jacks 10, 24, 25, 38, 46 automatic playback .......................................43 rewind, eject, off.
VRZ242 LAYOUT 4/9/99 9:25 AM Page 50.
VRZ242 LAYOUT 4/9/99 9:25 AM Page 51.
IB7981E001 Printed In China 0VMN02055 / H1720UD * * * * * S UPPLIED A CCESSORIES Remote Control 4835 218 37213 Two AA Batteries 4835 138 17012 RF Coaxial Cable, 75 ohm 4835 323 27011 Check to be sure the items on this page are packed with your VCR. These accessories are provided to help you use or set up your VCR.
An important point after buying a device Magnavox VRZ242AT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Magnavox VRZ242AT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Magnavox VRZ242AT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Magnavox VRZ242AT you will learn all the available features of the product, as well as information on its operation. The information that you get Magnavox VRZ242AT will certainly help you make a decision on the purchase.
If you already are a holder of Magnavox VRZ242AT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Magnavox VRZ242AT.
However, one of the most important roles played by the user manual is to help in solving problems with Magnavox VRZ242AT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Magnavox VRZ242AT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
