Instruction/ maintenance manual of the product MWD200GA Magnavox
Go to page of 20
Precautions Setup Functions Information Español DVD/CD Player MWD200GA Supplied Accessories Connecting to RF Modulator If your TV has AUDIO/VIDEO input jacks, see the section “Connections” on page 6. If not, it is still possible to connect this unit to your TV by using a STEREO AUDIO/ VIDEO RF modulator (commercially available).
– 2 – EN Precautions This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
– 3 – EN Precautions IMPORTANT SAFEGUARDS 1) Read Instructions - All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions - The safety and operating instructions should be retained for future reference.
– 4 – EN Precautions Location and Handling • Do not stand this unit up vertically. Install this unit in a horizontal and stable position. Do not place anything directly on top of this unit.
– 5 – EN Precautions If you cannot play back a disc which bears one of the marks above, check the following notes. *1: This unit conforms to the NTSC color system.
– 6 – EN Setup Connection to a TV Connections If your TV has AUDIO/VIDEO input jacks, see the following instructions. If not, see the section “Connecting to RF Modulator” on the front page.
– 7 – EN Setup COAXIAL COAXIAL DIGITAL AUDIO OUT LR AUDIO OUT R L Hint • The audio source on a disc in a Dolby Digital Multi-channel Surround format cannot be recorded as digital sound by an MD or DAT deck.
– 8 – EN Setup Installing the Batteries for the Remote Control Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. 2 3 1 Keep in mind the following when using the remote control: • Make sure that there is no obstacle between the remote control and the remote sensor on the unit.
– 9 – EN Functions ST ANDBY -ON AUDIO SUBTITLE ANGLE REPEA T CLEAR A - B P AUSE SLOW SKIP OPEN/CLOSE DISPLAY SEARCH MODE 12 3 45 6 78 9 0 +10 PLAY REV FWD STOP Functions Operations described in this section are mainly based on the remote control use.
– 10 – EN Functions 1 1 2 1 Search Functions Using Time Search 2 within 5 seconds 03/24 001/002 -- : -- : -- OFF SEARCH MODE PLA Y Press cursor [ B ] to highlight .
– 11 – EN Functions On-Screen Display You can check the information about the current disc by pressing [DISPLAY] on the remote control. Current repeat setting T(Title): Current title number / Tota.
– 12 – EN Functions 2 Select “RANDOM”. Then press [ENTER] . The RANDOM playback will start. 1 at your desired starting point (A) 2 1 Press [MODE] once during stop mode.
– 13 – EN Functions 1 1 1 1 Special Settings Audio Language This unit allows you to select an audio language (if multiple languages are available on disc) during DVD playback. 1 1. ENG Dolby D 5.1ch 48k/3 AUDIO Each time you press [AUDIO] or [ s / B ] , audio language changes as example below.
– 14 – EN Functions 2 Select the desired item. LANGUAGE AUD IO SUBTITLE DISC MENU PLA YER MENU 1 Press [SETUP] . SETUP Hint ∗ 1 • Language options are not available with some discs. • If OTHER is selected in the AUDIO, SUBTITLE or DISC MENU screen, Select the desired language using [ K / L / s / B ].
– 15 – EN Functions 3 Select the desired item. DISPLA Y_TV ASPECT TV ASPECT STILL MODE 4:3 LETTER BOX 4:3 P AN & SCAN 16:9 WIDE 3 Select the desired item. AUDIO_DRC DRC DOWN SAMPLING DOLBY DIGIT AL ON OFF Hint STILL MODE: • Select “AUTO” usually.
– 16 – EN Functions 8 Enter your new four- digit password again. 3 Press [ENTER] , and then select “YES”. 6 Select “CHANGE” at step 5 above. Hint • Record the password in case you forget it. • If you forget the password, press [4] , [7] , [3] , [7] at step 3 above, then enter your new password.
– 17 – EN Information 3 Select the desired PLAYER MENU Language, using the number buttons . Troubleshooting Guide If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit consulting the following checklist.
– 18 – EN Information Output signal format: NTSC color Power source: 120 V AC +/- 10%, 60 Hz +/- 0.5% Power consumption: 10 W (standby: 0.9 W) Operating temperature: 41°F (5°C) to 104°F (40°C) Dimensions: W : 8 5/16 ” (210 mm) H : 1 15/16 ” (50 mm) D : 9 5/8 ” (245 mm) Weight : Approx.
– 19 – ES Español ✄ 5 123 456 789 0 +10 • Para seleccionar directamente el capítulo o título. • Para seleccionar directamente la canción. (CD) • Para seleccionar directamente el grupo/ canción. (MP3) ENTER • Para mover el cursor y determinar la posición.
✄ Before: Turn on the TV, amplifier and any other equipment which are connected to this unit. Make sure the TV and audio receiver (commercially available) are set to the correct channel. 2 Confirm that “PLAYER MENU” is selected. 1 Confirm that “LANGUAGE” is selected.
An important point after buying a device Magnavox MWD200GA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Magnavox MWD200GA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Magnavox MWD200GA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Magnavox MWD200GA you will learn all the available features of the product, as well as information on its operation. The information that you get Magnavox MWD200GA will certainly help you make a decision on the purchase.
If you already are a holder of Magnavox MWD200GA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Magnavox MWD200GA.
However, one of the most important roles played by the user manual is to help in solving problems with Magnavox MWD200GA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Magnavox MWD200GA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
