Instruction/ maintenance manual of the product MDVDVCR5 Magnavox
Go to page of 52
1 D V D / V C R MDVDVCR5 c o m b o � �.
2 Introduction Congratulations on the purchase of your Magnavox DVD and VCR player. It is hoped that you have a lot of enjoyment from your player. Thank you very much for your purchase of this product. To enjoy your player to the full from the very beginning, read this manual carefully and keep it handy for ready reference.
3 Caution • D o not open - do not attempt to repair, disassemble or modify this appliance. • D angerous high voltages exist inside this appliance. • T his appliance is only to be serviced b y a qualifi ed person. • N o user-serviceable parts inside.
4 Warning To prevent fi re or shock hazard, do not expose this appliance to rain or moisture. The apparatus should not be exposed to dripping or splashing and that no objects fi lled with liquids, such as vases, shall be placed on the apparatus.
5 Advantages of This Product Are..... • DVD, VCD, CD, CD-R(MP3), CD-RW, VHS playback function • DVD one-touch record function • Watching DVD for recording broadcast • Integrated REMOTE (VCR, D.
6 • In case you don’t use the unit for a long time, the unit may not function properly in the future. Turn on and use the player occasionally. Moving • Repack the unit as it was originally packed at the factory. Alternatively, pack this product with towel not to be damaged.
7 Identifi cation of Controls Main body (front panel) 1. Standby/On button Press to turn the VCR on or off. NOTE: The Standby/On button is no function During OTR and Record mode. 2. Eject/VCR Press to stop tape movement and eject a video cassette. 3.
8 Operation Display Window 1. VCR Operation 2. Child (Lock) 3. TIMER REC display • TIMER Recording, • To be Timer-recorded, In Timer record state - will fl ash on/off indicating ‘No tape’ or ‘Tape without tab’ 4. Title This is displayed in VCD and CD disc.
9 Rear Panel 1. DVD 5.1 CH Audio Out 2. Audio Out (R/L) 3. Video/Audio RCA IN/OUT (AV) 4. TV Antenna In 5. DVD Digital Audio Out(Optical) 6. DVD S-Video Out 7. DVD Component Video Out (Green / Blue / Red) Engineering note: Please check correct color on sockets.
10 Remote Control Remote 1. Display Button 2. Open/close Button (DVD) Eject (VCR) 3. +10 Button 4. SP/LP Button 5. Enter Button 6. Set up Button 7. Stop Button 8. Fast Backward Button 9. Fast Forward Button 10. PBC Button 11. Return Button 12. Root Button 13.
1 1 Instructions in Using Remote • Operate REMOTE within 5m from the unit. • Do not press 2 (two) buttons at the same time. • Do not light up sending part of REMOTE.
12 How to Connect Your Player to a Camcorder • Before you start, unplug all the equipment from the mains supply. How to Connect If you have connected your camcorder in this way, you can also connect a RCA lead from “AV” on the back panel of the player to the television.
13 AV RCA Connecting How to connect The product has the AV input, shown in the dia- gram below, you can connect other equipment. When connecting other equipment please refer to their manuals for further information.
14 Auto Setting (Only on the fi rst time setup off the factory) Option 1 Connecting your TV thru Antenna and RCA cable (Recommended setup) (please make sure that you connected your TV and VCR properly) Select your TV to AV mode Tuning the VCR on (1) Press Standby/On on the remote control.
15 Setup Operation 1. Display Color All lines have gray background and selected line have green background white characters. 2. Basic Operation (1) Press the [SETUP] button to display the SETUP menu on a TV screen. (2) Press the [ / ] buttons to select the desired function on the SETUP menu.
16 SET UP Clo ck set Reco rd time r In st al la ti on Se a rc h Pr ef er en ce s ENTE R : Co nfir m SE TUP : End SE TUP : End CLOC K SET Time --:- - Date -- / -- / - - - - SE TUP : End CLOC K SET T im.
17 Record Timer 1. Recording Programming 1-1.MENU OPERATIONS (1) Press the [SETUP] button to call the Setup Menu in TV state. Press the [ / ] buttons to select the line of “Record Timer” and press the [ENTER] button to confi rm that.
18 - - > * ONCE - - > - -> - > -- --- -- -- - - - - - > -- --- -- -- - - - - - > -- --- -- -- - - - - - > ENT ER SETU P: End TIMER 1 PR - St ar t ti m e 1 1 : 1 1 E n d t i m e 12.
19 - - > - -> - > - > - > - > - - > - - > -- - - - -- --- - - - -- - - - -- - - - -- --- - - - -- - - - -- - - - -- --- - - - -- - - - -- - - - -- --- - - - -- - - > TIMER 1.
20 2. Timer Review (Erasure & Correction) 2-1.Erasure (1) Press the [SETUP] button to call the SETUP menu in TV state or press the [PROGRAM] button. Press the [ / ] buttons to select the line of “Record Timer” and press the [ENTER] button to confi rm that.
21 SET UP Clo ck set Reco rd time r In st al la ti on Se a rc h Pr ef er en ce s ENTE R: Co nfir m SE TUP : End SET UP Clo ck set Reco rd time r In st al la ti on Se a rc h Pr ef er en ce s ENTE R: Co.
22 Installation 1. Auto Installation (1) Press the [SETUP] button to display the Setup Menu screen in TV mode. Press the [ / ] buttons to select the line of “ Installation “ and press the [ENTER] button to confi rm that. (2) Press the [ / ] buttons to select the line of “Auto Installation” and press the [ENTER] button to confi rm that.
23 • Auto search -The user can either launch the auto search using right and left keys, or directly enter the channel number. Auto search moves automatically from last cable to fi rst antenna channel found and vice versa. • Fine Tuning-The user can fi ne tuning using right and left keys.
24 SET UP Clo c k se t Reco r d timer In st all at io n Se a r c h Pr efe re nc es ENTE R: Con firm SE TUP: En d IN ST AL LA TI O N Aut o in st all ati on Man ua li n st all at io n Organizer RF o utp ut se t ENTE R: Con firm SE TUP: End PR 0 1 N a m e - - - - Sw a p wit h P R - - Del et e p rog ra m.
25 4. RF Output Set In case, your VCR RF output interface the TV channel output, your need to change the RF setup as per following steps. (1) Press the [SETUP] button to call the Setup Menu in TV mode. Press the [ / ] buttons to select the line of “Installation” and press the [ENTER] button to confi rm that.
26 Preferences 1. OSD On/Off. (OSD - On Screen Display) The OSD On/Off control is set to “ON” mode before shipping and it can be changed to “OFF” mode. (1) Press the [SETUP] button to call the Main SETUP screen. Press the [ / ] buttons to select the line of “Preference” and press the [ENTER] button to confi rm that.
27 2. Index + Searching a cassette tape for programs (indexing) When you record a programs, the VCR places an index mark at the start of the recording. To search for an index mark: (1) Press the [SETUP] button to call the Main SETUP screen in [cassette-in] state.
28 3. Index- (1) Press the [SETUP] button to call the Main SETUP screen in [cassette-in] state. Press the [ / ] buttons to select the line of “Search” and press the [ENTER] button to confi rm that. (2) Press the [ / ] buttons to select the line of “Index -” and press the [ENTER] button to confi rm that.
29 4. VISS (VHS Index Search System) Remarks : Subtitle after the point 4 diagrams. (1) Under the following conditions, VISS can be executed. • Power On • Cassette In • Except for recording mode.
30 Special Playback/ Picture Search 1. Variable Slow (1) During playback mode, press the [SLOW] button once to see the slow picture. Whenever the [SLOW] button is pressed in slow mode, the slow speed will be changed: 1/15 -> 1/10 -> 1/5 -> 1/30 -> 1/25 -> 1/20 -> 1/15 -> .
31 (2) In special playback mode, tracking data is obtained in slow mode. 2. V-LOCK Control In still mode, press the [ / ] buttons to adjust V-LOCK. But, the optimal V-LOCK position, which has no picture movement in still mode, can be recognized by TV screen only because there is no display for this operation.
32 Front Display (Array) Synopsis 1. TAPE running mode The tape running displays (PLAY, FF, REW, ....) appear. 2. TV tuning mode The PR number appears for 3 seconds and it will be changed to the clock automatically.
33 VCR Playback 1. Press [ ] button to power on. Press [VCR] button of remote control to change into VCR mode. 2. Insert the desired tape. 3. If you want to playback it, press [PLAY] button. When the operational picture status is fl ickering or poor, adjust with [ / ] button.
34 One Touch Timer Recording (OTR) When your urgent business happens suddenly in watching TV or you want to record the current TV program for the desired time, follow the procedures below. 1. First, follow the steps 1 to 4 in “Recording With VCR”.
35 Erasure Protection Video cassettes are equipped with a safety tab to prevent accidental erasure. When the tab is removed, recording can not be performed. To Prevent Accidental Erasure • After recording, break off the safety tab with a screwdriver if you don’t want to record over the tape.
36 What Is Dew Condensation Symptom? If a VCR is moved from a cool place to a warm and damp place or a place facing a direct cool wind from air-conditioner...and others, temperature varies sharply, which makes dew on head drums of VCR. If Dew Condensation Occurs, 1.
37 DVD Player Operation Set Menu Items: Press the SETUP Button on the remote controller. The following menu will be shown: 1. GENERAL SETUP TV DISPLAY • Normal/PS This is selected when the DVD player is connected to a normal TV. Wide-screen images are shown on the screen.
38 Screen Saver Start the screen saver, the screen saver image appears when the player stops or the image is frozen for a few minutes. This saver can keep the screen from being damaged. • On (Start the screen saver). • Off (Remote the screen saver).
39 Rear Speaker User can setup the rear speakers. The option is available when DOWNMIX is off. • LARGE • SMALL • OFF They are for 5.1 Channel speaker output only. Subwoofer User can turn on/off the subwoofer through this option. • ON • OFF They are for 5.
40 Component User can set the S-Video or YUV video output. TV Mode In YUV video mode, user can selete Interlace or Progressive scan mode. Sharpness User can set the level of sharpness for the image displayed. There are three different levels. • HIGH • MEDIUM • LOW Brightness User can set the level of brightness for the image displayed.
41 4. Preference Setup (Under in DVD Stop mode) TV Type The DVD palyer supports PAL, Multi and NTSC system TV type Audio If a language listed below is recorded on the disc, you can play the sound in such language. If not, the language recorded will be used.
42 Disc Menu If a language listed below is record on the disc, you can set the Menu to be displayed in such language. If not, the language recorded will be used.
43 Default User can load the original factory setting by choose RESET and press ENTER. • RESET 6. Exit Setup Quit the Setup Menu. Exit Setu p Men u Load Fa ctory Settin g - Preference Page- Re s et .
44 PREV./NEXT ( / ) During playback, press one of the PREV./NEXT buttons (PREVIOUS button and NEXT button) • When the PREV. button is pressed once, the pickup returns to the beginning of the PREVIOUS playing chapter or track. • When the NEXT button is pressed once, the pickup will go to the beginning of next chapter or track.
45 Display (Remain Time) This function is applicable for DVD only. It will display the timing information of the playback on the screen. • For DVD playback, subsequent key press on the DISPLAY Button will show the Title Elapsed Time, Title Remain Time, Chapter Elapse Time and Chapter Remain Time one by one.
46 Program Mode This function is applicable for DVD and CD audio. User can assign the playback sequence according to his/her preference. For CD audio, user can assign the track sequence while for DVD disc, user can assign both the Title and Chapter sequence.
47 MP3 Operation This unit can support ISO9660 fi le system CD-ROM navigation. Multi-Media fi les such as MP3 thus can be played in the player. Operation • Insert the MP3 disc into the tray.The navigation menu will be displayed. The menu will show the fi les in the root directory, and the MP3 fi les can then be played automatically.
48 Before Doubting About Troubles (DVD) Symptom The recorder does not play. No sound comes through. A disc is playing but screen does not appear or poor screen appears. Sound is irregular. REMOTE does not work. “AUDIO” or “SUBTITLE” button does not work.
49 Symptom “Power On” does not work. It does not work even in “Power On”. A videotape is not inputted in. On inputting a videotape, the tape is re-ejected. A videotape is not ejected. A channel on video and a play screen does not appear. Noise (screen noise) appears on screen.
50 Symptom Symptom While recording and playing, the top of screen extremely waves. A screen is not clear. A screen at pause is trembling or slow screen is not clear. While duplicating, screen is not clean and distorted. Recording a TV program is impossible.
51 Specifi cations Power Consumed electricity Weight Dimension (WxHxD) Operative temperature Installation condition Signal type Antenna Input/output VIDEO input AUDIO input UHF output VIDEO output (c.
52 DO NOT SEND IN THIS WARRANTY Fill out the following details and fi le with your purchase invoice. RETAIN & FILE WITH YOUR RECEIPT. Your Purchase Receipt/Invoice is proof of date of purchase. You must be able to present it at the place of purchase to obtain a replacement or service under warranty.
An important point after buying a device Magnavox MDVDVCR5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Magnavox MDVDVCR5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Magnavox MDVDVCR5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Magnavox MDVDVCR5 you will learn all the available features of the product, as well as information on its operation. The information that you get Magnavox MDVDVCR5 will certainly help you make a decision on the purchase.
If you already are a holder of Magnavox MDVDVCR5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Magnavox MDVDVCR5.
However, one of the most important roles played by the user manual is to help in solving problems with Magnavox MDVDVCR5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Magnavox MDVDVCR5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
