Instruction/ maintenance manual of the product 701P41586 Magnavox
Go to page of 22
V ersion 1.3 May 2004 Xerox 6030/6050 Wide Format AutoCAD ADI/HDI Driver User Guide 701P41586.
2 Xerox Corporation Global Knowledge & Language Services 800 Phillips R oad Bldg. 845-17S Webster , NY 14580 Copyright © 2004 Xerox Corporat ion. All rights reserved.
3 Preface Preface Thank you for using the 6030/6050 W ide Format AutoCAD ADI Driver (hereinafter known as Plotter Driver). This User Guide describes the procedur es an d precautions involved in installing and setting up Plotter Driver .
4 Using This Guide Using This Guide Organization This guide consists of the following chapters. Chapter 1. Installing Pl otter Driver Explains how to install Plotter Driver into your computer .
5 Using This Guide Conventions This User Guide uses the follo wing symbols and conventions: < > key Indicates the keys on the keyboard. Press the <Enter> key. [ ] Indicates the menus and display items on the screens. Select either the [On] or [Off] buttons to display [Job Name], [Owner], and [Reason] in that order.
6 Using This Guide.
Table Of Contents Table of Contents Preface Using This Guide T able of Content s Chapter 1 Installing Plotter Driver 1.1 ADI Installation ............. ........... .............. ........... ............ .............. ........... .............. .....
Table Of Contents.
Chapter Chapter 0 1 Inst alling Plotter Driver Chapter 1.
2 Chapter 1 Installing Plotter Driver 1.1 ADI Inst allation The following example is based on the assumpti on that AutoCAD is in stall in drive C: and the floppy drive is A:. AutoCAD is installed by the att ached inst aller an d has the st andard directory configuration .
3 1.1 ADI Installation 2 Click the [Printer] tab to bring it to the foreground. 3 Click the [New ...] button to display th e “Add a Printer” dialog box.
4 Chapter 1 Installing Plotter Driver 4 Optional functions unique to the printer model can be set by clicking [Options...] button. These settings can be changed later by selecting [Device and Default Selection] from the “Print/Plot Configuration” dialog box.
5 1.1 ADI Installation 6 Click the [Options...] button to open the dialog box. Severa l functions are not supported by some plotter models (grayed out options are not supported). Folder Options Program: Select Folder Bypass or Programs 1 through 20. Margin: Select Use program setting or Always of f.
6 Chapter 1 Installing Plotter Driver 9 The current print settings are displayed. At the prompt “Do yo u want to change anything?”, enter N for No. Cont rol returns to the “Preferences” dialog box. This completes the driver installation and setup.
7 1.2 HDI Installation 1.2 HDI Installation The following examp le is to configure a local n on-system plotter and network non- system plotter . Copy the Driver 1 Un zip the driver file. This will cr eate subdirectorie s for 2000, 2000i, 2002 and 2004.
8 Chapter 1 Installing Plotter Driver 8 On the Add Plotter - Plotter Name page, enter a name to identify the currently configured plotter . Choose Next. 9 When you reach the Add Plotter - Finish page, you can choose Finish to exit the Add-a-Plotter wizard.
9 1.2 HDI Installation 7 On the Add Plotter - Plotter Model page, select a manufacturer and model. Choose Next. • (Optional) The Import PCP or PC2 screen enables y ou to use configuration information from a PCP or PC2 file created with an earlier version of AutoCAD.
10 Chapter 1 Installing Plotter Driver 1.3 Driver Operation Reference The driver setup informatio n set in the “Prefe rences” box at driver inst allation can also be changed when the PLOT comma nd is executed. Change Driver Setup 1 Execute the PLOT command to open the “Print/Plot Configu ration” dialog.
11 1.3 Driver Operation Reference Paper size: Select paper size. For this driver , paper size must be selected here, not at “Paper Size and Orientation” in the “Print/Plot Configuration” dialog box. Length: When “Custom size” is selected at “Paper Size”, set its length can be set in integral value in 1mm increments.
12 Chapter 1 Installing Plotter Driver Margin: Select Use program setting or Always of f. Output Bin: Select Don’t care, Fanfo ld output, or Bin 1 through Bin 13. Manual output: Select Y es or No to use or not to use the function. 7 Click [Image Correction] button to open the dialog box.
13 1.3 Driver Operation Reference.
14 Index Index I Installing Plot Driver (Window s XP) ................... 2, 7.
An important point after buying a device Magnavox 701P41586 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Magnavox 701P41586 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Magnavox 701P41586 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Magnavox 701P41586 you will learn all the available features of the product, as well as information on its operation. The information that you get Magnavox 701P41586 will certainly help you make a decision on the purchase.
If you already are a holder of Magnavox 701P41586, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Magnavox 701P41586.
However, one of the most important roles played by the user manual is to help in solving problems with Magnavox 701P41586. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Magnavox 701P41586 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
