Instruction/ maintenance manual of the product 17C13A2E Magnavox
Go to page of 19
E N 1 This "exclamation point" calls attention to a feature for which you should read the enclosed literature carefully to prevent operating and maintenance problems. This "bolt of lightning" indicates that uninsulated material within your unit may cause an electrical shock.
E N 2 Introduction The colour monitor displays sharp images of text and graphics with a maximum resolution up to 1280x1024 pixels. It is optimal for W indows, CAD / CAM / CAE, desktop publishing, spread sheets, multi-media, and any other application which demands large scr een size and high resolutions.
E N 3 Note: If you experienced your monitor display is changing from color to mono, it's possible that you are using a non-VESA-DDC-standar d video card.
E N 4 Safety precautions and maintenance ◆ Disconnect the monitor from the mains supply if the monitor is not to be used for an extended period of time. ◆ Do not attempt to remove the back cover , as you will be exposed to a shock hazard. The back cover should only be r emoved by qualified service personnel.
E N 5 Installation Important: Please refer to the user ’ s manuals of your computer and video adapter to make sure these equipments are properly installed and configured before installing the monitor . Positioning / V entilation ◆ A void exposing the monitor to dir ect sunlight, stoves or any other heat sources.
E N 6 Connection • Connect the monitor to the computer using the supplied interface cables. Connection with computer system other than IBM PC or Apple computers may need differ ent type of adapters. Please consult your computer supplier for these adapters.
E N 7 Control locations and functions Monitor control panel Descriptions of knobs and keypads on front control panel ➀ • Press this knob to switch ON and OFF of monitor ’ s power . ➁ • OSD rotary contr ol knob. ➂ • Active OSD menu. √ • Adjust contrast of the display .
E N 8 OSD menu tree structure First Level Second Level Third Level SIZE & POSITION HORIZONTAL POSITION HORIZONTAL SIZE VERTICAL POSITION VERTICAL SIZE CANCEL GEOMETRY COLOR TEMPERATURE SPECIAL EXI.
E N 9 On-Screen-Display Activating the On-Screen-Display The monitor controls ar e accessed by pressing button to enable OSD (On-Screen-Display). The main menu will be displayed as follows. Each Sub-Menu (1-6) is selected by highlighting it via the r otary control and pressing button to confirm.
E N 10 ● Contrast : Adjusts contrast between for egr ound and background. 1 63% 1 ● Save : Save user adjustment and return to main menu. ● Cancel : Abandon setup and return to main menu.
E N 11 ● V ertical Size : Adjusts image height 2 63% 2 ● V ertical Position : Moves image up or down 2 63% 2 ● Save : Save user adjustment and return to main menu. ● Cancel : Abandon setup and return to main menu. Sub Menu-3: GEOMETR Y ● Pincushion : Adjusts the amount of curvature on the vertical edges.
E N 12 ● T ilt : Tilts the image clockwise or counter -clockwise. 3 63% 3 ● Save : Save user adjustment and return to main menu. ● Cancel : Abandon setup and return to main menu. Sub Menu-4: COLOR TEMPERA TURE ● 9300 ° K : Factory preset color temperatur e of 9300 ° K.
E N 13 ● User 1 : User set 1 for color temperature then select R, G or B for adjustment. R : Adjusts red intensity . G : Adjusts green intensity . B : Adjusts blue intensity .
E N 14 Sub Menu-5: SPECIAL ● Manual Degauss : Discoloration of the image can be caused by gradual magnetization of the monitor components. This is particularly likely to occur when the monitor is moved or rotated.
E N 15 Sub Menu-6: RECALL F ACTOR Y PRESETS ● Recall : Recall brightness and contrast presets. 7 7 ● Recall : Recall size and phase presets. 7 7 ● Recall : Recall geometry preset. 7 7 ● Save : Save user adjustment and return to main menu. ● Cancel : Abandon setup and return to main menu.
E N 16 Frequence Sync polarity Mode Resolution H(KHz) V(Hz) H V M01 VGA 640x400 31.5 70 – + M02 VGA 640x480 31.5 60 –– M03 VGA 640x480 37.5 7 5 – – M04 VESA 640x480 43.3 85 –– M05 SVGA 800x600 37.8 60 + + M06 SVGA 800x600 46.9 75 + + M07 VESA 800x600 53.
E N 17 Automatic Power Saving If you have VESA's DPMS compliance display card or softwar e installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from keyboar d, mouse or other input devices is detected, the monitor will automatically “ wake up ” .
E N 18 Specification* (I) General CR T Screen size : 17" (43.2 cm) flat & square Dot pitch : 0.28 mm Phosphor : P22 or equivalent, medium short persistence Screen tr eatment : Anti-glare, ant.
E N 19 1 Red video input 9 No pin 2 Green video input 10 Self-test 3 Blue video input 11 Ground 4 Ground 12 Serial data line (SDA) 5 Identical output 13 H. Sync / H+V - Connected to pin 10 14 V. Sync (VCLK for DDC) 6 Red video ground 15 Data clock line (SDA) 7 Green video ground 8 Blue video ground Pin No.
An important point after buying a device Magnavox 17C13A2E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Magnavox 17C13A2E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Magnavox 17C13A2E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Magnavox 17C13A2E you will learn all the available features of the product, as well as information on its operation. The information that you get Magnavox 17C13A2E will certainly help you make a decision on the purchase.
If you already are a holder of Magnavox 17C13A2E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Magnavox 17C13A2E.
However, one of the most important roles played by the user manual is to help in solving problems with Magnavox 17C13A2E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Magnavox 17C13A2E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
