Instruction/ maintenance manual of the product MMD1040 Magnasonic
Go to page of 16
For Customer Ass istance Call: 1-800-663-5954 MMD1040 DVD/CD Player with Stereo Radio/Clock INSTRUCTION MANUAL www.magnasonic.ca Thank you for your purchase of this Magnasonic product. Pleas e read th is Instruction Manual carefully before using product to ensure proper use.
TABLE OF CONTENTS Product Warning 3 What’s Included 4 Product Illustration 4 Main Unit 4 Remote 5 Basic Connections 6 Connecting to a TV 6 Attaching the Speakers 7 Connect to outlet and Power On 7 C.
ATTENTION - CAUTION: USE OF AN Y CONTROLS, ADJUSTMEN TS, OR PROCEDUR ES OTHER THAN THOSE SPEC IFIED HEREIN MAY RESULT IN HA ZARDOUS RADIATION EXPOSURE - CAUTION: DANGER OF EXPLOSION IF BATTERY IS I NCOR RECTLY REPLACED.
WHAT’S INCLUDED - DVD/CD Player - 2 Speakers - Remote Control - Instruction Manual PRODUCT ILLUSTRATION Main Unit Front Back - 4 -.
1. EARPHONE JACK 2. SPEAKERS 3. POWER button 4. IR REMOTE SENSOR 5. FUNCTION button 6. ALARM SET/ALARM SLEEP button 7. VOLUME DOWN button 8. VOLUME UP button 9. LCD DISPLAY 10. PREV/TUNE DOWN/MINUTE ADJUST button 11. NEXT/TUNE UP/HOUR ADJUST button 12.
1. DISPLAY button 2. FUNCTION button 3. PREV/REWIND/TUNE DOW N/MINUTE button 4. NEXT/FAST FORWARD/TUNE UP/HOUR button 5. SUBTITLES button 6. NAVIGATIONAL buttons (UP/DO WN/ (LEFT/M-) / (RIGHT/M+) ) 7. PROGRAM/ANGLE button 8. NUMERIC buttons 9. VOLUME DOWN button 10.
Attaching the Speakers Note: The right and left speakers are NOT interchan geabl e. The left speaker only fits on the left side of the DVD player, and the right speaker only fits on the right side of the DVD player. Note: Please be sure that both speaker plugs are conn ected to the spea ker jacks before unit is powered on.
Enabling/Disabling the Alarm 1. To turn on the alarm, while the DV D player is in standby mode, p ress ALARM SET until the clock icon appears in the LCD display. 2. The alarm will sound at your selected al arm time until the BUZZER OFF button on the remote is pressed.
Adjusting the Volume 1. To change the volume during playba ck, pre ss the VOLUME UP or VOLUME DOWN buttons on the main unit or the remo te. 2. The volume level will be displayed on th e LCD screen. 3. To mute the volume, press the MUTE button on the remote.
Search for a Scene 1. Press the SEARCH button on the remote and using the NAVIGATION buttons, choose whether you would lik e to search usi ng title, chapt er, title time, or chapter time. 2. Input the desired title or chapter number using the NUMERIC butto ns on the remote Programmed Play (20 Programmable Memories) 1.
Note: This button will not work if there are no alternate language soundtracks. Multi-Angle Viewing (DVD Only) Press the ANGLE button on the remote while in playback mode to displ ay number of angles available . Usi ng the NAVIGATION buttons on the remote; scroll to desired angle and press OK button.
Kodak Picture CD/JPEG CD Operation 1. Playback Mode – Press the REPEAT bu tton on the remote to switch to repeat or repeat all. 2. Skip to Next/Previous Picture – Press the NEXT and PREVIOUS buttons on the main unit or remote to switch to the next or previous pictures.
When the DVD player is not in use for se veral minute s, a DVD logo screen saver will appear on the screen to prot ect the TV scree n, when set to off the screen saver will never appear even whe n not in use. Audio Setup Down Mix Changes the way the DVD player play s sounds through the spe akers.
DIGITAL TUNER (RADIO) OPERATION Basic Operation 1. Press the FUNCTION button on the mai n unit or remote to choose the Tuner function. 2. Press the STOP button on the main unit or remote to choose either AM or FM radio. 3. Press the TUNE UP or TUNE DO WN b uttons on the main unit or remote to manually change the radio station you are listenin g to.
DISC HANDLING PRECAUTIONS • Hold the disc by the edge to the surface will not be spoiled with finger prints. Dirt and scratched cause skipping and distortio n, or may render the disc completely unre.
MAGNASONIC ® WARRA NTY Consumer Electronics Products an d Home Appliances Thank you for choosing MAGNASONIC ® ! BlueTronics Group gives the following ex press warranty to the original consu mer purc.
An important point after buying a device Magnasonic MMD1040 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Magnasonic MMD1040 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Magnasonic MMD1040 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Magnasonic MMD1040 you will learn all the available features of the product, as well as information on its operation. The information that you get Magnasonic MMD1040 will certainly help you make a decision on the purchase.
If you already are a holder of Magnasonic MMD1040, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Magnasonic MMD1040.
However, one of the most important roles played by the user manual is to help in solving problems with Magnasonic MMD1040. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Magnasonic MMD1040 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
