Instruction/ maintenance manual of the product PL30 Magnadyne
Go to page of 8
OWNER’S MANUAL Model: PL30 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation.
2 The information enclosed will provide a ready reference of the operation and maintenance of your new remote mobile security system. 1. Exit the vehicle and close all entrances. 2. Press and release the ARM/DIS or LOCK button on the transmitter . The security system will respond as follows: A.
Note: The following information is valid only if your security system has been programmed to automatically arm. 1. T urn off the ignition key and exit the vehicle. 2. Close all protected entrances. After the last protected entrance is closed the horn/siren will chirp one time and the LED indicator will begin to flash fast.
4 Override Operation: (Security System is Armed) 1. Enter the vehicle. (The security system will begin sounding at this point) 2. Place the ignition key into the ignition switch and turn the ignition switch to the “on” position. 3. Within 5 seconds of turning the ignition key “on”, flip the valet switch to the “on” position.
5 Press and hold the ARM/DIS or P ANIC or LOCK button for more than 3 seconds and the security system will respond in the following manner: A. The horn/siren will begin sounding. B. The parking lights will begin flashing. T o turn off the panic alarm, press and release the ARM/DIS or P ANIC button on the transmitter .
6 1. The LED indicator will provide information on 7 modes of security system operation: LED is off = Security system is disarmed. LED is flashing = Security system is armed. LED is flashing fast = Automatic arming timer or RF protection mode timer is counting down.
7 The following is a brief description of the operation of each programmable feature. Any adjustment to the operation of these features must be performed by the dealer who installed your security system.
System Maintenance: The only maintenance that your security system requires is a periodic check of it’ s operation to be sure that all functions are operating properly . The batteries supplied with your transmitter will usually last about 1 year . Heavier usage will shorten battery life.
An important point after buying a device Magnadyne PL30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Magnadyne PL30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Magnadyne PL30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Magnadyne PL30 you will learn all the available features of the product, as well as information on its operation. The information that you get Magnadyne PL30 will certainly help you make a decision on the purchase.
If you already are a holder of Magnadyne PL30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Magnadyne PL30.
However, one of the most important roles played by the user manual is to help in solving problems with Magnadyne PL30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Magnadyne PL30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
