Instruction/ maintenance manual of the product HDV-Recorder MacroSystem Digital Video
Go to page of 14
User manual .
The following product named "HDV-Recorder" carries the CE seal of conformity on the basis of the guidelines 89/336/EWG of the Commission of the European Community mutual recognition of their conformity . This recorder is meant for use with hard-drives carrying the CE seal of conformity .
Contents Page 1. General information .......................................................................................... 5 2. HDV -Recorder ....................................................................................................
Legal notices T o avoid making mistakes during operation, we recommend that you carefully follow the instructions provided in this manual. W e have taken a great deal of care whilst programming and checking this software.
5 1. General information Congratulation on purchasing the HDV - Recorder! W e would like to thank you for putting trust in our company and hope that this product shall meet your expectations. This manual explains how to use the HDV - Recorder , its on screen menus and the single functions.
6 7 IEEE 1394. The recorder stores this material if you wish. After that, the video can be output digitally to DVD or analogue via VGA to a hi-res TFT monitor with a resolution of up to 1920 x 1 2 00 pixels and up to 60 Hz frame rate.
6 7 optic cable to connect with a digital audio amplier . Switching to either is not required as the signal is output both analogue and digitally at the same time. If you are using a PS2 keypad/keyboard, connect it with the purple keyboard port (3) at the back of the recorder .
8 9 T o power down the HDV -Recorder , select the ` Power Off ´ item in the main menu with the keypad/keyboard. Y ou can read how to select a menu item in the next chapter .
8 9 with the arrow up/arrow down keys, and once you have pressed the Ok key , the recorder software shall ask you: ` Start recording? ´ Make sure to select ` Y es ´ and press the Ok key to begin recording the video to the hard-drive. (Pressing the Exit key or selecting ` No ´ would return you to the Record Menu.
10 11 Once you have stopped playback, the system returns to the normal live signal video display or a grey screen appears with the text `No HDV Signal´. With the `cut and paste´ function, you can move the position of the lms in order to rearrange the order for the ` Play all lms ´ mode.
10 11 your recorded video. After entering the menu, a requester appears, allowing you to select the lm that is to be trimmed. After selecting, the trim menu appears: In the background, you can see the rst frame of the footage. Use the key arrow up to select the function In (for the In-point).
12 13 7.8 The P AL Menu In this menu, you can use the left/right arrows to switch between ` 60 Hz monitor ´ and ` 50 monitor ´. If the connected monitor supports a frame rate of 50 Hz, please select ` 50 Hz monitor ´ so that P AL videos can be played in 50 Hz mode.
12 13 example, we had chosen 1920x1200, most projector beamers would show no picture and the user would hence not be in a position to set t the required resolution. This default setting can be brought back any time by pressing the ` Reset monitor ´ key for a longer time (app.
260-04/06.
An important point after buying a device MacroSystem Digital Video HDV-Recorder (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MacroSystem Digital Video HDV-Recorder yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MacroSystem Digital Video HDV-Recorder - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MacroSystem Digital Video HDV-Recorder you will learn all the available features of the product, as well as information on its operation. The information that you get MacroSystem Digital Video HDV-Recorder will certainly help you make a decision on the purchase.
If you already are a holder of MacroSystem Digital Video HDV-Recorder, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MacroSystem Digital Video HDV-Recorder.
However, one of the most important roles played by the user manual is to help in solving problems with MacroSystem Digital Video HDV-Recorder. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MacroSystem Digital Video HDV-Recorder along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
