Instruction/ maintenance manual of the product CR1604-VLZ Mackie
Go to page of 6
CR1 604-VL Z ARCH ITECT S’ & ENGI NEERS’ SPECIF ICA TIONS ■ “IN Y OU R F ACE” ALL -PRODUCT BROCH U R E MORE INFORMA TION FEA TURES RO T OPOD-VL Z • MIXER M IXER • R EMO TE F ADER • CORDP ACK ■ 16 low noise/high headroom XLR mic inputs (–1 29.
17.9" (454.7mm) 11 rack spaces 17.6" (447.0mm) 10 rack spaces 13.0" (325.1mm) 8 rack spaces 13.0" (325.1mm) 13.0" (325.1mm) 8.7" (221.0mm) 9.3" (236.2mm) 19.0" (482.6mm) Jacks to top. (Pod normal.) Jacks to back.
Phones source matrix lets you route any combination of tape, subs 1 -2, 3-4, main mix or Aux 4 to headphones, control room outputs, and meters. T his enables you to monitor 2-track tape output or rout.
MAIN L SUB 3 MAIN R SUB 2 SUB 1 SUB 4 AUX 1 AUX 2 AUX 3 AUX 4 AUX 5 AUX 6 SIP L SIP R PFL LOGIC 75Hz HPF MID HI 80 100–8K 12K LO L R 1 2 3 4 SIP L SIP R PFL PHANTOM POWER (GLOBAL SWITCH TRIM MIC IN .
Other notable features: • Dual-Purpose LEDs: –20/ Solo LED flickers when there’s signal present in that channel, and when solo is engaged, glows steadily . Similarly , the OL/Mute LED flickers when the channel’s overloaded, and glows steadily when mute is engaged.
Mackie Designs Inc. is engaged in a continuous program of product evaluation and improve- ment and reserves the right to change product specifications at any time without notice. © 1997 , 1998 Mackie Designs Inc. All rights reserved. Printed in Woodinville USA.
An important point after buying a device Mackie CR1604-VLZ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mackie CR1604-VLZ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mackie CR1604-VLZ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mackie CR1604-VLZ you will learn all the available features of the product, as well as information on its operation. The information that you get Mackie CR1604-VLZ will certainly help you make a decision on the purchase.
If you already are a holder of Mackie CR1604-VLZ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mackie CR1604-VLZ.
However, one of the most important roles played by the user manual is to help in solving problems with Mackie CR1604-VLZ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mackie CR1604-VLZ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
