Instruction/ maintenance manual of the product SP-700 Mace
Go to page of 6
MACE Electronic Surveillance Products 3233 SW 2nd Ave. Fort Landerdale, FL 33315 USA toll-free(877)585-MACE local(954)585-6223 fax(954)585-6225 www.mace.
3 Color Camera Part name and feature 1 MOUNTING BRACKET CABLE CAMERA BASE (Install mounting bracket first and install camera base) CAMERA &P/T MODULE SHIELD DOME DOME COVER 3 Color Camera Summary &Special features 1. Summary The surveillance direction of PT-102 is turned freely left,right,up and down.
5 Color Camera 4 Color Camera Part name and feature 2 1. Set up Auto Pan Sphere 16 different steps of sphere setup.Each step covers 20˚ It is set for maximum pan when you receive this product. 2. Set Camera No. (Address,Last Grade,) – S/W No.1 to No.
6 Color Camera Remote controller operation 7 Color Camera Camera selection Use No.1 to No9 to select settled address on PT-102. Auto Pan On Auto Pan feature of selected camera Auto pan is stopped by press Left, right key . Direction control key Direction control key for selected camera 4.
9 Color Camera 8 Color Camera The last grade of Rx in S/W No.10 must be turned on. Support Max.256 address. DIP S/W setting table Warranty Mace will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
MEMO.
An important point after buying a device Mace SP-700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mace SP-700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mace SP-700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mace SP-700 you will learn all the available features of the product, as well as information on its operation. The information that you get Mace SP-700 will certainly help you make a decision on the purchase.
If you already are a holder of Mace SP-700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mace SP-700.
However, one of the most important roles played by the user manual is to help in solving problems with Mace SP-700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mace SP-700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
