Instruction/ maintenance manual of the product 1952 Aprilaire
Go to page of 12
Safety , Installation and Ser vice Manual Models 1 952 , 1 953 & 1 972 Ultraviolet Germicidal Lamps READ AND SA VE THIS MANUAL Model 1952 24” Rooftop Unit Model 1953 32” Rooftop Unit Model 197.
2 I. SAFETY INSTRUCTIONS WARNING Ultraviolet light is harmful to eyes and skin. Never look at light produced by this lamp. Shut off power to lamp before servicing. Electrical shock from 120 - 277 V AC may cause serious injury . Shut off power before starting installation and do not turn power back on until complete.
3 II. APPLICA TION Models 1952, 1953, and 1972 Aprilaire Ultraviolet Germicidal Lamps are designed for the treatment of evaporator coils used in rooftop HV AC air handling units or in larger split systems used in the light commercial market.
4 INST ALLA TION OF EXTERNAL MOUNT ROOFTOP UNITS (MODELS 1952 & 1953) a. The lamps are intended for evaporator coil treatment. See Figure 2 for typical installation. If a single Lamp cannot illuminate the majority of the evaporator coil, two or more units might be required as shown.
5 INST ALL THE UNIT BASE 1. Using the Unit Base as a guide, mark the locations for the lamp and mounting holes on the rooftop unit cabinet. 2. Carefully inspect the inside of the rooftop unit and make sure that no damage to any components will occur as a result of drilling the holes.
6 INST ALL LAMP 1. Remove Lamp from shipping tube. Use ceramic ends of Lamp when handling – do not touch the glass tube of Lamp. Use alcohol to remove any dirt and/or fingerprints from the Lamp. 2. Referring to Figure 4, follow the steps below to install Lamp: a.
7 INST ALLA TION OF INTERNAL MOUNT ROOFTOP UNITS (MODEL 1972) Wiring Access Cover Mounting Brackets Lamp Socket Lamp FIGURE 5 – Model 1 972 90-744 CHECK LAMP OPERA TION The preferred method for checking lamp operation is to measure the current draw of the lamp using a clamp-on ammeter .
8 a. The lamps are intended for evaporator coil treatment. See Figure 6 for typical installations. If a single Lamp cannot illuminate the majority of the evaporator coil, two or more units might be required. T o the extent possible, the Lamp(s) should be centered on the coil (or section thereof) being illuminated.
9 3A Fuse Ground Y ellow (2) NO T USED Ballast Lamp Sock et Red (2) Blue (2) White Black Green Green Black 120V AC to 277V AC P ower Source White Interlock switches (not provided) recommended for all access panel doors FIGURE 7 – Model 1972 Wiring Diagram 90-754 INST ALL LAMP 1.
10 IV . ANNUAL LAMP REPLACEMENT The Aprilaire Ultraviolet Germicidal Lamp is designed for the lamp to be on at all times. After 9,000 hours of operation – 1 year of constant use – the effectiveness of the lamp inside the unit diminishes and needs to be replaced.
11 VI. TROUBLESHOOTING If the Lamp does not operate, check the following: 1. Electrical Connections – Verify that the Lamp has been wired correctly . The power to lamp must be always ‘on’ during normal operation. On External Mount Units, verify that safety switch inside the cover of Unit Base has not been damaged.
B2203283 1015 E. W ASHINGT ON A VE. • MADISON, WI 53703 • PHONE: 888/782-8638 • F AX: 608/257-4357 • www .aprilairecontractor .com VIII. LIMITED WARRANTY Y our Research Products Corporation Ap.
An important point after buying a device Aprilaire 1952 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aprilaire 1952 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aprilaire 1952 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aprilaire 1952 you will learn all the available features of the product, as well as information on its operation. The information that you get Aprilaire 1952 will certainly help you make a decision on the purchase.
If you already are a holder of Aprilaire 1952, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aprilaire 1952.
However, one of the most important roles played by the user manual is to help in solving problems with Aprilaire 1952. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aprilaire 1952 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
