Instruction/ maintenance manual of the product Home Theater System M&S Systems
Go to page of 8
Mini-Cube Home Theater Package Model MNCS / MNCSB Mini-Cube Speakers Model MNC / MNCB Instruction Manual.
INTRODUCTION M&S Systems is introduci ng cube speakers (M NC) and a cube speake r package for Home Theate r applications (MNCS) offering quality sound at an affordable price. The compact size allows for installation in any room without being intrusive to you r decor.
The subwoofer for the Mi ni-Cube Home Theater P ackage has an 8” active woofer. It is available in a black matte finish. RMS Power Rating 100 Watts Frequency Response 40 Hz to 350 Hz Crossover 40 Hz to 180Hz (Adjustable) Controls Power, Volume, Cro ssover Frequency, Phase Connection s RCA Jacks a nd Spring Terminal s Height 13.
SPEAKER CONNECTONS 1. Turn off the receiver or amplifier and un plug it from the power outlet. 2. Use a 2-conductor 16-gauge spea ker wire (M&S part number MS16X) for best results.
Figure 2 5. The MNCS system ma y be connected two ways d epending on the amplifier used with the system. The major difference is the subwoofer co nnections. • An amplifier with a subwoofer output connection, us ually a RCA type connector would be the prefe rr ed connection when used with the MNCS subwoofer (see fig ure 3).
LT FRONT RT Figure 4 6. IMPORTANT! Make sure t here are no l oose strands of wi re touching each other across the speaker o r amp lifier terminals. This can create a short circuit and damage your electronics. 7. Plug your a mplifier or receive r in, turn it on, and enjoy your new music system .
• The power switch can be set to OFF-AUTO-O N. The OFF position disables the subwoofer com pletely. The AUTO position p uts the subwoofer in a st andby mode (low power) when the system i s not in use. When a signal is applied, t he su bwoofer is automatically turned on.
WARRANTY 115909 D M&S Systems 2-Year Limited Produ ct Warranty M&S Systems warrants for 2 years all products to be free of defects The warranty period begins from either (1) the date of “first user” purchase of this product or (2) the first close of escrow date on a residence in which this new product was originally installed.
An important point after buying a device M&S Systems Home Theater System (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought M&S Systems Home Theater System yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data M&S Systems Home Theater System - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, M&S Systems Home Theater System you will learn all the available features of the product, as well as information on its operation. The information that you get M&S Systems Home Theater System will certainly help you make a decision on the purchase.
If you already are a holder of M&S Systems Home Theater System, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime M&S Systems Home Theater System.
However, one of the most important roles played by the user manual is to help in solving problems with M&S Systems Home Theater System. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device M&S Systems Home Theater System along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
