Instruction/ maintenance manual of the product MH-1 Lyngdorf Audio
Go to page of 8
Owner´s manual MH-1 Mk II.
2 T able of Contents Introduction 3 General tips for setting up speakers 4 - Stereo triangle 4 - Damping 4 - T oe-in 5 Connecting 6 - Single-wiring 6 - Bi-wiring 6 Placement 7 Cleaning 7 Specifi cati.
3 Introduction Congratulations on the purchase of your L yngdorf Audio MH-1 Mk II. The MH-1 Mk II is an upgraded version of the successful MH-1 which was designed for active speaker system operation. The new Mk II version can also be used as a passive speaker thanks to its newly de- veloped crossover .
4 General tips for setting up speakers Stereo triangle Y ou can use the stereo triangle as a good rule of thumb when placing your speakers. This means the distance between the speakers should be the same as the distance from your listening position to both speakers; in other words an equilateral triangle.
5 T oe-in T o achieve optimal sound, try experimenting with ‘toeing in’ the speakers towards the listening position. This achieves two things: a) Fine-tuning of the tweeter level, which is more sensitive to refl ections than mid- range and bass output, treble is more directive than midrange and bass frequencies.
6 Connecting The MH-1 Mk II speaker comes prepared for bi-wiring. Please note the following two possible setups. Single-wiring For single-wire connections, the terminal jumpers should be attached as shown in the illustration.
7 Placement For an optimal listening experience, we recommend you place these speakers a minimum of 2m/6ft from each other , a minimum of 0.5m/1.5ft from the back wall and at least 1m/3ft from any side walls. Cleaning Please use a dust-free cloth to clean the speakers.
8 T echnical Assistance For latest version of this document and ‘Questions and Answers’, please check the ‘Support’ section on the L yngdorf Audio website.
An important point after buying a device Lyngdorf Audio MH-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lyngdorf Audio MH-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lyngdorf Audio MH-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lyngdorf Audio MH-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Lyngdorf Audio MH-1 will certainly help you make a decision on the purchase.
If you already are a holder of Lyngdorf Audio MH-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lyngdorf Audio MH-1.
However, one of the most important roles played by the user manual is to help in solving problems with Lyngdorf Audio MH-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lyngdorf Audio MH-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
