Instruction/ maintenance manual of the product T40-1143SA Lux Products
Go to page of 2
© COPYRIGHT 2006 LUX PRODUCTS CORPORA TION. ALL RIGHTS RESERVED SPECIFICA TIONS INST ALLA TION & OPERA TION 1). THERMOST A T LOCA TION For accurate temperature contr ol and comfort, correct location is very important. On new installations, the guidelines listed below should be followed as closely as possible.
■ ■ Place Base, Figure 3, over Sub-Base and attach by tightening three captive screws. ■ ■ Fasten loosely to wall using two mounting screws. Place a level against the bottom of the Base, adjust until it is level and then tighten mounting screws to secure.
An important point after buying a device Lux Products T40-1143SA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lux Products T40-1143SA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lux Products T40-1143SA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lux Products T40-1143SA you will learn all the available features of the product, as well as information on its operation. The information that you get Lux Products T40-1143SA will certainly help you make a decision on the purchase.
If you already are a holder of Lux Products T40-1143SA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lux Products T40-1143SA.
However, one of the most important roles played by the user manual is to help in solving problems with Lux Products T40-1143SA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lux Products T40-1143SA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
