Instruction/ maintenance manual of the product 2220 Lumiscope
Go to page of 36
Non-T ouch Thermometer Instruction Manual 2220-INS-LAB-RevB10 Model 2220.
2 Contents Product Overview ................................................................ 3 Product Description ............................................................. 4 Meanings of the Symbols ................................................
3 Product Overview Utilizing infrared technology , this thermometer takes tem- peratures in seconds by measuring heat generated by the surface skin of the forehead or other objects. Advantages include: Ergonomic design and convenience This is a “Non-Contact” medical thermometer .
4 Product Description Items Included: 1. Thermometer 2. 2x AAA batteries 3. Instruction manual 4. Storage bag.
5 Meanings of the Symbols Degrees of temperature Scanning sequences in progress Smiling face (indicating temperature is lower than 38°C or 100.4°F) Frowning face (indicating temperature is equal or higher than 38°C or 100.
6 Battery Installation Low battery warning: When the “low battery warning” symbol appears on the display , it means the batteries will need to be replaced soon (see Figure 1). The thermometer still operates properly until both symbols of “Lo” and “ ” are shown on the display .
7 Measuring T emperature T oggle between forehead scan mode and object scan mode by pressing, holding momentarily , and releasing the MODE button. T aking a temperature reading from the forehead: • Press the POWER button and hold it for one second to turn the device on.
8 Measuring T emperature T aking a temperature reading from an object: • Press the POWER button to turn the device on. • Press the MODE button for one second. Ensure the unit is in Object Scan mode (this is shown on the LCD). • Press and hold the SCAN button, while aiming at the desired object.
9 Measuring T emperature • While in the forehead mode, a smil - ing face “ ” will display to indicate a temperature lower than 38°C (100.4°F). If the temperature is equal to or higher than 38°C (100.4°F), you will see a frowning face “ ” on the display , accompanied by one long beep followed by two short beeps (see Figures 7 and 8).
10 Sw it ch in g B et we en Ce ls iu s a nd F ah re n he it When the Non-T ouch Thermometer is in “power on” status, press and hold both the MEM and MODE buttons for 3 seconds to toggle between the two measurement standards (F and C) (see Figures 12 and 13).
1 1 Operating Precautions • Do not disassemble the thermometer . • Use the thermometer for its intended purpose only . • Do not expose the thermometer to extreme temperatures or high humidity . • Hold the device carefully when in use to avoid dropping.
12 K e y R u l e s f o r A c c u r a t e T e m p e r a t u r e M e a s u r e m e n t • Avoid measuring body temperature within 30 minutes after exercise, bathing, or returning from outdoors. • Allow one minute between successive measurements, as slight variations may occur if measurements are taken over too short a period of time.
13 Applied Standards This product conforms to the provisions of the EC directive MDD (93/42/EEC). The following standards apply to design and/or manufacturing: • ASTM E 1965- 98 Standard Specicat.
14 Product Specications • Measuring T emperature Range: Human Body: 10°C ~ 50°C (50.0°F ~ 122.0°F) Object: 0°C ~ 100°C (32.0°F ~ 212.0°F) • Measuring accuracy: Human Body: ± 0.
15 EMC T ables 2220 Thermometer 2220 Thermometer The 2220 Thermometer complies with RF standards. 2220 Thermometer.
16 EMC T ables 2220 Thermometer 2220 2220 Power Power Power Thermometer 2220.
17 EMC T ables 2220 Thermometer 2220 2220 2220 2220 2220.
18 EMC T ables 2220 2220 2220 2220.
19 W arranty GF Health products, Inc. (“Graham-Field”) warrants the Lumiscope 2220 Non-T ouch Thermometer against manu- facturer ’s defects for a period of one year .
U.S.A. Corporate Headquar ters: GF Health Products, Inc. (“Graham-Field”) 2935 Nor theast Parkway Atlanta, Georgia 30360 tel: 800-347-5678, 770-368-4700 fax: 800-726-0601, 678-291-3232 www .
No T ocar T ermómetro Modelo 2220 Manual de Instrucciones 2220-INS-LAB-RevB10.
2 A VISO Las medidas de temperatura obtenidos son sólo de referencia. Antes de tomar cualquier acción médica, consulte a su médico. Envases, garantías, productos y especicaciones están sujetas a cambios sin previo aviso. GF Health Products, Inc.
3 Descripción del Producto Utilizando la tecnología de infrarrojos, este termómetro toma la temperatura en segundos mediante el calor de la cabeza gene- rado por la supercie de la piel de la frente o en otros objetos. Las ventajas incluyen: El diseño ergonómico y la comodidad Se trata de un “sin contacto” termómetro médico.
4 Panorama Elementos incluidos: 1. T ermómetro 2. 2 baterías AAA 3. Manual de instrucciones 4. Bolsa de almacenamiento.
5 Signicados de los Símbolos Grados de temperatura Las secuencias de exploración en curso La cara sonriente (que indica la temperatu- ra es inferior a 38°C o 100.4°F) El ceño fruncido (que indica la temperatura es igual o superior a 38°C o 100.
6 Instalación de las Baterías A viso de batería baja: Cuando el “aviso de batería baja” símbolo aparece en la pan- talla, signica que las baterías deben ser reemplazados antes (vea Figura 1). El termómetro sigue funcionando correctamente hasta que los dos símbolos de “Lo” y “ ” se muestran en la pantalla.
7 Medición de la T emperatura Alternar entre la frente y el modo de escaneo de objetos pul- sando el modo de exploración, explotación momentáneamente, y soltar el botón de modo. T omar una medida de la temperatura de la frente: • Presione el botón de encendido y mante - nerlo durante un segundo para encender el aparato.
8 Medición de la T emperatura T omar una medida de la temperatura de un objeto: • Presione el botón de encendido para encender el aparato. • Presione el botón de modo durante un segundo. Asegúrese de que la unidad está en modo de escaneo de objetos (esto se muestra en la pantalla LCD).
9 Medición de la T emperatura • Mientras que en el modo de frente, una cara sonriente “ ” aparecerá para indicar una temperatura inferior a 38°C (100.
10 Cambiar entre Grados Celsius y Fahrenheit Cuando la No T ocar T ermómetro está en el estado “encendido”, pulse y mantenga pulsado los dos botones de memoria y modo durante 3 segundos para alternar entre las dos normas de medición (F y C) (vea Figuras 12 y 13).
1 1 Precauciones de Funcionamiento • No desarme el termómetro. • Use el termómetro para los nes previstos solamente. • No exponga el termómetro a temperaturas extremas o hu - medad alta. • Mantenga el aparato con cuidado cuando en uso para evitar que se caiga.
12 Reglamentos Claves de Medición Exacta de T emperatura • Evite la medición de la temperatura corporal dentro de los 30 minutos después del ejercicio, bañarse, o que regresan desde el exterior .
13 Las Normas Aplicadas Este producto cumple con las disposiciones de la directiva de la CE MDD (93/42/CEE). Las normas siguientes se aplican al diseño y / o de fabricación: • ASTM E 1965 / 98 Esp.
14 Especicaciones del Producto • Medición de T emperatura: El cuerpo humano: 10°C ~ 50°C (50.0°F ~ 122.0°F) Objeto: 0°C ~ 100°C (32.0°F ~ 212.0°F) • Precisión de medición: El cuerpo humano: ± 0.3°C (± 0.5°F) Objeto: ± 5% • Resolución de pantalla: 0.
15 Garantía GF Health Products, Inc. (“Graham-Field”) garantiza que el Lumiscope 2220 No T ocar T ermómetro contra defectos de fabricación durante un período de un año.
U.S.A. Oficinas Centrales: GF Health Products, Inc. (“Graham-Field”) 2935 Nor theast Parkway Atlanta, Georgia 30360 tel: 800-347-5678, 770-368-4700 fax: 800-726-0601, 678-291-3232 www .
An important point after buying a device Lumiscope 2220 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lumiscope 2220 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lumiscope 2220 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lumiscope 2220 you will learn all the available features of the product, as well as information on its operation. The information that you get Lumiscope 2220 will certainly help you make a decision on the purchase.
If you already are a holder of Lumiscope 2220, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lumiscope 2220.
However, one of the most important roles played by the user manual is to help in solving problems with Lumiscope 2220. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lumiscope 2220 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
