Instruction/ maintenance manual of the product AQ2000 Lumex Syatems
Go to page of 16
AQ1000 / AQ2000 AL TERNA TING PRESSURE BUBBLE P AD AND PUMP SYSTEM USER MANUAL Impor tant: Do not operate the Mattress System without rst reading and understanding this manual! Save this manual for future use. The latest version of this manual can be found online at www.
2 AQ1000-INS-LAB-RevD13 CONTENTS INTRODUCTION ...................................................................................... 3 INTENDEDUSEOFTHISDEVICE ........................................................ 3 CONTRAINDICA TION .
AQ1000-INS-LAB-RevD13 3 INTRODUCTION Use this manual for setup and operation of the Lumex AQ1000 / AQ2000 Alternating Pr essur e Pad and Pump System. Read all instructions befor e using the pad and pump system. Save this manual for futur e r eference.
4 AQ1000-INS-LAB-RevD13 CAUTION:Indicatesapotentialhazardorunsafe practicethat,ifnotavoided,couldresultinminoror moderatepersonalinjury .
AQ1000-INS-LAB-RevD13 5 W ARNING:Neveroperatethisproductif a) ithasadamagedcordorplug. b) itisnotworkingproperly . c) ithasbeendroppedordamaged. d) ithasbeendroppedintowater .
6 AQ1000-INS-LAB-RevD13 EQUIPMENT SYMBOLS Attention! Consult accompanying documents (this manual) “BF”symbol: Indicates that this product is in accordance with the degree of protection against .
AQ1000-INS-LAB-RevD13 7 PRODUCT DESCRIPTION B UBBLE P AD AND PUMP SY STEM bubble pad and pump system air tubes bubble pad pump PUMP pump (AQ2000 shown) front panel wire hangers fuses (220V only) ai.
8 AQ1000-INS-LAB-RevD13 FRONT P ANEL AQ1000 AQ1000 pump front panel ON/OFF switch air tube connectors AQ2000 AQ2000 pump front panel ON/OFF switch pressur e control dial Fr ont panel pr essur e contr ol dial (AQ2000 only) : The pr essur e control dial contr ols the air pr essure output.
AQ1000-INS-LAB-RevD13 9 INST ALLA TION UNP ACKING 1. Befor e unpacking, check for obvious damage to the carton or its contents. If damage is evident, please notify the carrier and your Graham-Field authorized distributor . 2. Remove all loose packing fr om the carton.
10 AQ1000-INS-LAB-RevD13 5. Connect one end of the air tubes to the bubble pad: slide the ends of the air tubes over the connectors on the top of the foot end of the bubble pad.
AQ1000-INS-LAB-RevD13 11 OPERA TION 1. T urn the ON/OFF switch to the ON position. The pump will begin to deliver air into the bubble pad. 2. Replace all sheets, blankets, and pillows on the bed. Info: if the pressure level seems low , check for any leakage in the air tubes or bubble pad.
12 AQ1000-INS-LAB-RevD13 MAINTENANCE CLEANING Perform the following cleaning pr ocedur es before use and as necessar y thereafter . Pump W ipe the pump with a clean, damp cloth and mild deter gent, and keep it away from dust.
AQ1000-INS-LAB-RevD13 13 Fuse replacement (220V system onl y) tool needed: small screwdriver 1. If you suspect a blown fuse, disconnect the plug fr om the wall outlet immediately . fuse location fuse fuse cover 2. Use a small scr ewdriver to r emove the cover of the fuse holder (fuse locations ar e shown in pictur e above).
14 AQ1000-INS-LAB-RevD13 SPECIFICA TIONS Model AQ1000 (Standard) AQ2000 (Delux e) P ow er Supply 120V : 120V AC, 60 Hz, 1A 220V : 230V AC, 50 Hz, 7W Fuse Rating 120V : N/A 220V : T1A, 250V Pressur e 1.9 psi (13.10 kPa) 1.0 - 2.0 psi (6.89-13.79 kPa) Air Output 120V : 4.
AQ1000-INS-LAB-RevD13 15 WARRANTY GF Health Pr oducts, Inc. warrants the Lumex AQ1000 / AQ2000 Alternating Pr essur e Pad and Pump System for defects in workmanship and materials for the terms listed below . Pump: one year Pad: 90 days If a pr oduct is deemed to be under warranty , GF Health Pr oducts, Inc.
GF Health Products, Inc. 2935 Nor theast Parkway Atlanta, Georgia 30360 tel: 770-368-4700 fax: 770-368-2386 www .grahamfield.com © 2008 GF Health Products, Inc.
An important point after buying a device Lumex Syatems AQ2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lumex Syatems AQ2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lumex Syatems AQ2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lumex Syatems AQ2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Lumex Syatems AQ2000 will certainly help you make a decision on the purchase.
If you already are a holder of Lumex Syatems AQ2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lumex Syatems AQ2000.
However, one of the most important roles played by the user manual is to help in solving problems with Lumex Syatems AQ2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lumex Syatems AQ2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
