Instruction/ maintenance manual of the product PSAX 1250 Lucent Technologies
Go to page of 440
Doc. No.: 2 55-700-017 COMCODE: 300303252 PacketSta r ™ PSAX 1250 Access Co ncentrator User Guide A PacketStar™ PSAX Central Office Pr oduct Issue 1, Octob er 2000 System Software Releas e 6.
Copyri ght © 2 000 by L ucent T echnolo gies. A ll rights rese rved. For trad emark, regulator y compliance, and rela ted legal informa tion, see the " Copy righ t an d L egal Not ices" sect ion .
255-700-0 17 iii Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Copyright and Legal Notices Copyright Copyrigh t © 2000 b y Lucent T echnolog ies. All right s reserved . This material is protected by t he copyright laws of t he United States and other countries.
Copyright and Legal Notices W arranty Information iv 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 W arranty W ar nings ! CAUTION: Do not make elect rical or mechanical modifications to any of the components in the PSAX syste m.
255-700-0 17 v Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Copyright and Le gal Notices Regulato ry Standar ds Complian ce ! CAUTION: If your system or location loses power or your cu.
Copyright and Legal Notices Regulatory St atements vi 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 20S00, 20S 10, 20P01, 2 0P02, 20P03 , 20P04, 20 P05, 20P06, 20P09, 20P1 .
255-700-0 17 vii Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Copyright and Le gal Notices Regulat ory Statements residential area is likely to cause harmful interference; in this case, you would be req uired to correct th e interfer ence at your own expens e.
Copyright and Legal Notices Regulatory St atements viii 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 This equipmen t cannot be used on public coin telephone serv ice provided by the tele phone company . Connectio n to party line se rvice is subject to state tariffs.
255-700-0 17 ix Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Copyright and Le gal Notices Regulat ory Statements homologati on indiq ue que l’équip ement sati sfait cert aines règles de protection, d’exploitation et de s écurité des réseaux de télécommunications.
Copyright and Legal Notices Regulatory St atements x 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Japanese Regulatory Statement V oluntary Control Council (VCC I) Class A Regulatory Statement.
255-700-0 17 xi Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Safety W ar nings and Information When installing and operating the PSAX 1250 Access Concent rator, follow the safety guidelines prov ided below to help prevent serious injury and/or damage to th e PSAX 1250 equipm ent.
Safety Warnings and Information xii 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 disconnect t he power cor d fr om the module befor e r emoving it fr om the PSAX 1250 chassis. ! DANGER: When setting up a PSAX 1250 Access Concent rator system that uses a single (i.
255-700-0 17 xiii Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Safety W arnings and Information on the equipment. If this connection is made, a ll of the following conditions must be m.
Safety Warnings and Information xiv 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ! DANGER: Do not work on the system, connect, or disconnect cables during periods of possible lightning activity .
255-700-0 17 xv Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Safety W arnings and Information W ARNING: ! Be sure to use the ejector handles during installation and removal of I/O and server modules. W ARNING: ! When inserting modules into t he chassis, slide them gent ly , not forcefully .
Safety Warnings and Information xvi 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ! CAUTION: When using a DSP2A, DS P2B or DSP2C V oice Server module and a n Enhanced DS1/E.
255-700-0 17 xvii Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Contents Copyright and Legal Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Copyright . . . . . . . . . . . . . . . . . . . .
Contents xviii 255 -700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Grounding Wrist Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 0 Floor Cover ing . . . . . . . . . . . . . .
Contents 255-700-0 17 xix Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Circuit Emulation Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3- 3 Dynamic Band width Circuit Emulation Service .
Contents xx 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Fault Man agement Functio ns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -28 Detection . . . . . . . . . . . . . . . . . . . .
Contents 255-700-0 17 xxi Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5 0 DS3 IMA Mo dule . . . . . . . . . . . . .
Contents xxii 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Circuit Emulatio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 -65 T erminal Emulation . . . . . . . . . . . . .
Contents 255-700-0 17 xxiii Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Logging onto the Syste m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Help Informatio n . . . . . . . . .
Contents xxiv 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Configuri ng Call Control Resource Allocat ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -77 Setting th e Configuration V alues . . . . . . .
Contents 255-700-0 17 xxv Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Setting Up for the File T ransfe r Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 -12 T r ansferring S oftware Upgrade Files . . . . . . .
Contents xxvi 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C: Configuring In-Band Management. . . . . . . . . . . . . . . . . . . . . . . . . C-1 Setting U p In-Ba nd Managemen t Configu ration . . . . . . . . . . .
Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 255-700-0 17 1-1 1 Getting Started Purpose of This G uide The Packe tStar ™ PSA X 1250 Access Concentr ator User Guide provides informat.
Chapter 1 Getting St arted Rela ted Read ing 1-2 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 T o configure the Connection Gateway API, re ad the following publications that are provided on your Lucent T e chnologies Access Concentrato r Modu les Product Inform ation Librar y CD-ROM.
255-700-0 17 1-3 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Rela ted Re ading Printed Documents For your convenience, the following documents from your Product Informati on Library CD-ROM are also available in printe d form.
Chapter 1 Getting St arted Rela ted Read ing 1-4 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 T able 1-2. PacketStar ™ Release 6.3.0 Produc t Information Library (P rinted Documents) Docum ent Issue COMCODE Docume nt Number PSAX 1250 Insta llation and Oper a- tion Guide, Relea se 6.
255-700-0 17 1-5 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Rela ted Re ading DS1 IMA Module User Guide, Release 6.3 Issue 1 30030309 6 255-700-0 32 DS3 A TM Modul e User Gu ide, Release 6.3 Issue 1 30030310 4 255-700-0 33 DS3 Frame Relay Module User Guide, Rele ase 6.
Chapter 1 Getting St arted Rela ted Read ing 1-6 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Other Publications Numerous book s are currently available on the subject of bas ic telecommunications technology and specific protocols.
255-700-0 17 1-7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted Rela ted Re ading ~ User to Network Interf ace (UNI) Specification V ersion 3.1 ~ VTOA AAL1 T run king Ser vices, af-vtoa-0098 .000 • A TM Forum Impleme ntation Ag reements: ~ Inverse Multiplexin g over A TM V ersion 1.
Chapter 1 Getting St arted T echnical Sup port 1-8 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 ~ I.356, B-ISDN A TM Layer Cell T ransfer Performance ~ I.361, B-ISDN A TM Layer Specification ~ I.363, B-IS DN A TM Adap tation Laye r (AAL) Sp ecificat ion ~ I.
255-700-0 17 1-9 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted T ext Conve ntions Icons and Symbols Follow all safe ty guidelines in this document to help prev ent personal injury to you an d damage t o the PSAX 1 250 Access C oncentrator system equipment.
Chapter 1 Getting St arted Electrostat ic Dis charge Prec aution s 1-1 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Electr ostatic Discharge Precautions The ro om wher.
255-700-0 17 1-11 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 1 Getting St arted About Lucent T echnologies Clothing When work ing with t he PSAX 12 50 system , avoi d wearing cl othing ma de from wool or synthetic materials.
Chapter 1 Getting St arted Commen ts on Th is Guide 1-1 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Comments o n This Guide T o comment on the Packe tStar ™ PSAX 12.
Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 255-700-0 17 2-1 2 Har dwar e Description Overview o f This Chapter This chap ter prese nts an over view o f the PSAX 12 50 system hardwar e.
Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-2 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 the PSAX 1250 syst em to a true multi-service platfo rm.
255-700-0 17 2-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents • Channe lized STS-1 e T1 modu le • DS1 IMA mod.
Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-4 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Server Modules • DSP2C V oice Server module ~ DSP2.
255-700-0 17 2-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents ~ In the 58.
Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-6 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 technologies of the PSAX 1 250 syste m.
255-700-0 17 2-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents Power Supply Modules Three t ypes of pow er supply .
Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-8 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Figur e 2-5.
255-700-0 17 2-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents Figur e 2-6.
Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-1 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Stratum 3–4 Module T w o type s of Str atu m 3 –4 mo dul es are avai lab le : IT U-c om pli an t St rat um 3–4 and ANSI-compliant Stra tum 3–4.
255-700-0 17 2-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents all the I/O modu les use the bus from the remai ning Stratum 3–4 modul e, but system throughput is r educed by half, that is, to 600 Mbps.
Chapter 2 Hardware Description PSAX 1250 Sys tem Hardwa re Compon ents 2-1 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 CPU Module Operating in a nonloa d-sharing, primary/standb y mode, the CPU module provides t he proces sing, swi tching, and sto rage funct ions for t he PSAX 1250 system.
255-700-0 17 2-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Syste m Hardwa re Comp onents Figur e 2-1.
Chapter 2 Hardware Description PSAX 1250 Sy stem Hardw are Sp ecifications 2-1 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 PSAX 1250 System H ar dware Specifications PSAX 1250 Chassis Specifications The specificatio ns for the PSAX 1250 chassis are given in T able 2-1.
255-700-0 17 2-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Sy stem Har dware Specificatio ns The specif ications for the PSAX 1250 220 V a c Power Supply module are found in T a ble 2-3. W ARNING: ! The AC power cor d is rated at 125 V ac.
Chapter 2 Hardware Description PSAX 1250 Sy stem Hardw are Sp ecifications 2-1 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.
255-700-0 17 2-17 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Sy stem Har dware Specificatio ns ! CAUTION: The external synchronization interface port pr ovided on the Stratum 3–4 module is intended only to be connected to an in-building reference clock signal.
Chapter 2 Hardware Description PSAX 1250 Sy stem Hardw are Sp ecifications 2-1 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.
255-700-0 17 2-19 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description PSAX 1250 Sy stem Har dware Specificatio ns PacketStar I/O and Server Module Envir onmental Specifications The environmental specifications f or the PacketSt ar ™ I / O a n d S e r v e r mo d u l e s are give n in T able 2-8 .
Chapter 2 Hardware Description PSAX 1250 Sy stem Hardw are Sp ecifications 2-2 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.
255-700-0 17 2-21 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 2 Hardware Description Facility Power Sou rce Requir ements Note: The I/O b uffers carry 1 6,384 cells pe r megab.
Chapter 2 Hardware Description PSAX 125 0 System Configurat ions 2-2 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 PSAX 1250 System Con figurations Be sure you have order.
Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 255-700-0 17 3-1 3 System Featur es Overview o f This Chapter This chapter p resents a so ftware overvie w of the PSAX 1250 Access Concent rator offe red by Luce nt T echnol ogies.
Chapter 3 Syst em Features System Ca pabil ities 3-2 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The PSAX 1250 Access Concen trator system offers a variety of user interfaces to suppor t voice, video, a nd data application s (see Fig ure 3-1).
255-700-0 17 3-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features User Interfaces • Inverse multiplexing over A TM (IMA ) to create vir tual access lines t hat.
Chapter 3 Syst em Features User Interfaces 3-4 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Packe tStar ™ Acce ss Concentra tors support structured circui t emulation (individual DS0 circuit emulation) of traditional voice-base d and data services o n the DS1 module.
255-700-0 17 3-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features User Interfaces compliant with the specification and d oes not interoperate with other dev ices that are fully comp liant. The DBCES feature, in essence, performs idle channel suppression for voice traffic.
Chapter 3 Syst em Features User Interfaces 3-6 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Channelized ST S-1e • Enhanced DS1 module • Enhanced E1 module • Multi-Seri al module High-level data link cont rol (HDLC) uses an ITU-T SS link layer pr otocol standard for point-to-point and multipoint communication.
255-700-0 17 3-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features User Interfaces mechanisms a dded to support source routing, cra nkback and alt ernate routing of all call setup requests in case of connection setup failure.
Chapter 3 Syst em Features User Interfaces 3-8 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 PTSEs, describin g the resources of the origin ating switch and the outbou nd resources of each of that switch’ s attached links.
255-700-0 17 3-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Network Mana gement because they do not look as far into the NSAP; a level with a scope of 64 (maskin g the first 8 bytes) r esides ab ove a level with a s cope of 72.
Chapter 3 Syst em Features Network Mana gement 3-1 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 This port is typically used for local management (using a direct serial connection), but it can also be used for remote management.
255-700-0 17 3-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Network Mana gement In-band Management SVCs Releas e 6.
Chapter 3 Syst em Features Network Mana gement 3-1 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Centralized collecti on of PSAX and core events in the NavisCore Even.
255-700-0 17 3-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es PSAX 1250 Software Featur es The Access Conce ntrator system s .
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-1 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 make use of simple PV Cs within the network, interoperability issues do not exist with intervening switches. During normal operation, the primary PVC carries al l the data associated with the DHPVC.
255-700-0 17 3-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es AQueMan™ Algorithm W ith A TM, predictab le QoS is achieved for all applicat ions by the transmission o f voice, video, and data usi ng short, fixe d-length cells interl eaved at guaranteed bit rates.
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-1 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 T able 3-2 illust rates t he attrib utes of th e classe s of servi ce suppo rted b y the Access Concentrat or system so ftware .
255-700-0 17 3-17 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es system. The flexibility of t he Access Concentrator systems allow s the user to tailor the system based on the required se rvice applications and the selection of the a ppropriate priority lev els.
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-1 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 AQueMa n™ classifies traffic based on s ervice-level prior it.
255-700-0 17 3-19 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es networkin g p rotocols. The connect ion gateway allo ws p owerful interworking of A TM, ISDN, SS7 , CAS, and othe r protocols.
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-2 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Bridging is a ccomplished by re laying data from the MAC layer of o ne LAN to the MAC layer of another LAN (see Fig ure 3-4).
255-700-0 17 3-21 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es • Brid ge m anagem ent This function enables end users to manage configuration and performance, and collect cell records an d billing information.
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-2 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 environment, such as t raffic transmitte d across sa tellite and line-of -sight ra d io - fr e q u en c y c ir cu i t s.
255-700-0 17 3-23 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es W h e n t h e u s e r s e l e c t s t h e 1 / 2 , t h e 1 / 4 , o r t h e 1 / 8 r a t e , t h e e n c o d e r m a i n t a i n s that selected rate of encoding regardless of actual error conditions.
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-2 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Note: FRF . 5 and FRF .8 are not interoperab le and cannot be used at both sides of a network. Y ou may wish to use an F RF .
255-700-0 17 3-25 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es The main features o f LANET include the following: • Regular .
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-2 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 accounting for 0.
255-700-0 17 3-27 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es The LANET subframe functions i n the fo llowing ways : • The timely arrival of the header patterns is used as a confidence check, confirming that the system is proper ly synchronized.
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-2 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • OAM Cell T ype: the managemen t type (fa ult, activation/de.
255-700-0 17 3-29 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es The activation/deactivation O AM mechanism is used to remotely s tart and stop the generation of cells that perpe tually monitor performance and continuity .
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-3 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 F4/F5 AIS alarms are generat ed when a network elemen t receive.
255-700-0 17 3-31 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es within five seconds, the loopb ack is conside red successful. If the source does not receive a success ful loopback, it d eclares a time out.
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-3 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ~ B-A (e gress): t oward the activa tor/deacti vator ~ both: bi.
255-700-0 17 3-33 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es • The AIS alarm i s stopped by the NE as soon as it receives an i nput signal.
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-3 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Alarm Indicator Signal (AIS) Module: DS1 IMA A network element ( NE) will transmit an AIS alarm when it detects a defect o n t h e u n f r a m e d , a l l o n e s AI S s i gn a l f o r 2 .
255-700-0 17 3-35 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es signaling proced ures. Consequently , this type of conne ction has attributes of both a switched virtual connection and a permanent virtual connection.
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-3 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • The Access Concent rator sy stem (e quipped w ith 64 MB of memor y on the CPU module) can proce ss 20,000 maximum sim ultaneo us SVC calls in pr ogress.
255-700-0 17 3-37 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es interf ace (UNI) to the us er .
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-3 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The following state tra nsition messages are us ed for A T M po.
255-700-0 17 3-39 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es T raffic Sh aping The traffic shaping feature is a method for controlling the flow of data t raffic. It is impleme nted in firmware on modules that are offe red with traff ic- shaping variatio ns.
Chapter 3 Syst em Features PSAX 1250 Softwa re Featur es 3-4 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 MBS par ameter , end users who se traffic vi olates th eir contr actual MB S parameter experience high cell loss (and hence high pa cket loss).
255-700-0 17 3-41 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features PSAX 12 50 Softwar e Featur es The algorit hm processes traf fic moving out of the input cell selection buff er according to the SC R of the pa rticular VPC /VCC.
Chapter 3 Syst em Features I/O, Opti cal, and Server Mo dules 3-4 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The DSP 2C module su pports A TM Adaptation Layer 2 (AAL-2) S VC connections and PVC multiplexing for reduced ca ll latency .
255-700-0 17 3-43 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features I/O, Optica l, and Server Modul es • DS3 IMA module • E1 IMA module • E3 A TM modul e .
Chapter 3 Syst em Features Alar m Modul e 3-4 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • T ones and Announcements Server module Alarm Module The Alarm module de te.
255-700-0 17 3-45 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Channeli zed DS3 Modul e Channelized DS3 Module The Cha nnelized DS3 module prov ides one p ort with a lin e rate of 44.736 Mbps . The user can configure this module to provide N x 64 Kbps (fractional DS1) structured circuit emulation service.
Chapter 3 Syst em Features Channel ized STS -1e (T1) M odule 3-4 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Private Network -Network Interface (PNN I), Specification V er sion 1.0 , af-pnni- 0055.000 • Integrated Loca l Management Interface (ILM I) Specification V e rsion 4.
255-700-0 17 3-47 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Channeli zed STS-1e (T1) Modul e emulation, the Channelized ST S-1e T1 module can adapt a maximum of 28 DS-1 channels per port to ATM virtual channels with i ndividual VPIs a nd VCIs.
Chapter 3 Syst em Features DS1 IMA M odule 3-4 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ~ Frame r elay UNI and NNI ( FRF .
255-700-0 17 3-49 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features DS3 A TM Modul e DS3 A TM Module The DS3 A TM module pr ovides a networ k interface at D igital Signa l Level 3 (DS-3), with a line rate of 44.736 Mbps .
Chapter 3 Syst em Features DS3 IMA M odule 3-5 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • FRF .2 —Netwo rk-to-Net work In terface (NNI) • FRF .5 —Frame R elay/A TM PVC Net work Inte rworking • FRF .8 —Frame R elay/A TM PV C Servic e Interw orking • Multise rvices: ~ Frame r elay UNI and NNI ( FRF .
255-700-0 17 3-51 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features DS3 A TM Modul e Module User Guide ) an d the DS 1 IMA module (see the PacketSta r ™ DS1 IMA Module User Guide ).
Chapter 3 Syst em Features DS3 Frame Relay Module 3-5 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Concen trator system to an ATM e dge switch . The DS3 A TM modu le has three types of L ED indicators: FAIL, ACTI VE, and LOS ( loss of sign al).
255-700-0 17 3-53 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features E1 IMA Module ~ Frame r elay UNI and NNI ( FRF .
Chapter 3 Syst em Features E3 A TM Module 3-5 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 E-1 lines. At the destination IMA module, the E-1 streams a re merged back together in correc t order a nd passed on to other modules a s directed by virtual circuit connections.
255-700-0 17 3-55 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features En hanced DS1 Mo dule • Integrated Loca l Management Inter face Specification V ersion 4.
Chapter 3 Syst em Features Enhance d DS1 Module 3-5 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Note: The Enhanced DS1 Circuit Emulation (CE only) module is functionally identical to the Enhanced DS1 module, except that the Enhanced DS1 (CE only) module provides a license for circuit emulation functions only .
255-700-0 17 3-57 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features En hanced E1 Modu le • Line rat e: 1.544 Mbps Enhanced E1 Mod ule The Enhanced E1 mo dule provides six p orts, each with a line rate of 2.048 Mbps.
Chapter 3 Syst em Features Ethernet Module 3-5 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 A T M Forum T echnical Committee Specifications: • Circuit Emulation Service Interoper ability Specification V ersion 2.0 af-vtoa- 0078.
255-700-0 17 3-59 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features High-Densi ty E1 Modul e Softwar e Featur es The E thernet bridging feature includes the encap.
Chapter 3 Syst em Features High-Spe ed Module 3-6 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 af-ilmi-0065.000 Multi-Serv ices: • A TM: A TM UNI 3.
255-700-0 17 3-61 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Medium-Densi ty DS1 Modul e The soft ware suppor ts the follo wing A TM Foru m T echnical Committe e Specifications : • Circuit Emulation Service Interoperab ility Specification V ersion 2.
Chapter 3 Syst em Features Medium-De nsity DS1 Modu le 3-6 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 integrated services digital net work with a primary rate interf ace (ISDN PRI) service, a nd A TM services.
255-700-0 17 3-63 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Multi -Seria l Modu le • HDLC pass throug h mode (N x 56 and N x 64) • Frame r elay UNI and NNI ( FRF .1, FRF .2 , FRF .5, and FRF .8) • ITU-T I.
Chapter 3 Syst em Features Mult i-Seri al Mo dule 3-6 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 asynchronous transfe r mode (A TM) (using limit less A TM network [LANET] protocol). Softwar e Featur es The so ftware suppor ts the following Fra me Rela y Forum (FR F) Implem entation Agreement s: • FRF .
255-700-0 17 3-65 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Multi -Seria l Modu le (NNI) by setti ng perf ormance parameters such as the Committed Inf ormatio n Rate (C IR), Exces s Burst size (Be), an d Committed Burst size (Bc).
Chapter 3 Syst em Features V oice 2-Wire Of fice Mod ule 3-6 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Connector type: micro-DB15 • Interface s supporte d: EIA-2 32-D, EIA-530, EIA-449 v .
255-700-0 17 3-67 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Optical-T ype I/O Modules voice device can be connected directly to this module in the Acces s Concentrator sys tem to communicate over an A TM network.
Chapter 3 Syst em Features OC-3c Mul ti-mode and Singl e-Mode Modu les 3-6 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • One variat ion for bo th the Multi- Mode and Sing le-Mode types, wit h the names OC-3c MM AQ module and OC-3c S M AQ module, uses the AQueM an ™ algorithm for flo w control.
255-700-0 17 3-69 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features STM-1 M ulti-Mode and Sin gle-Mode Mo dules STM-1 Multi-Mode and Single-Mode Modules The STM-1.
Chapter 3 Syst em Features STM-1 M ulti-Mode and Sin gle-Mode Mo dules 3-7 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Interim Inter-Switch S ignaling Protocol, af-pnni-0026.000 • Private Network -Network Interface (PNN I), af-pnni-0055.
255-700-0 17 3-71 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Server Modu les Server Modules DSP2 V oice Server Module The DSP 2C V oice S erver module pr ocesses vo ice and other dig ital da ta on a Packe tStar ™ Access C oncentrator system .
Chapter 3 Syst em Features DSP2 V oice S erver Module 3-7 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • Soft perma nent virtual cir cuit (SPVC) s upport for circuit e mulation servi ce (CES ).
255-700-0 17 3-73 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features DSP2 V oice Ser ver Modu le T able 3-9. Ma trix of Featur es and Standa rds Su pported on the DSP 2C Modes A, B a nd Echo Cancella tion Releas e 6.
Chapter 3 Syst em Features DSP2 V oice S erver Module 3-7 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 DSP2C V oice Server F eatures Multiplexed or Nonmultiplexed AAL-2 The choice of multiplexed A TM Adaptation Layer 2 (AAL-2) has been added.
255-700-0 17 3-75 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features DSP2 V oice Ser ver Modu le on-hook t o off-hook , where the on- hook state last bet ween 300 m sec and 1000 ms ec. This fea ture is compliant w ith TIA/EIA-4 64-B Requ irements for Privat e Bran ch Excha nge (P BX) Swit ching Eq uipme nt.
Chapter 3 Syst em Features DSP2 V oice S erver Module 3-7 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 DSP2A and DSP2B Single-Mode V oice Server Modules (System Release 6.2.0) ! CAUTION: The DSP2A and DS P2B Single-Mode Modules are not upgradable to System Softwa re Release 6.
255-700-0 17 3-77 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features Route S erver Modul e • On the DSP2A a nd DSP2B si ngle-mode module s, the number of t ails supported in echo cancellation is 32 msec fe wer than in DSP2C mode i n Ta b l e 3 - 1 0 .
Chapter 3 Syst em Features T ones and Announ cements Se rver Module 3-7 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Y ou can assign an authenti cation password to an IP network inte rface for maximum security .
255-700-0 17 3-79 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 3 Syst em Features and edge devices s uch as the AC 60 and the PSAX 20, the module offers call routing information to a connection gateway without using an expensive circuit switch.
Chapter 3 Syst em Features 3-8 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0.
Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 255-700-0 17 4-1 4 Configuring the Basic System Overview o f This Chapter This chapter d escribes how t o configure the PS AX 1250 Acces s Concentrator system a nd set the sy stem value s for your site.
Chapter 4 Configuring the Basic System Loggi ng ont o the S ystem 4-2 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The PSA X 1250 Logon window is displaye d (see Fig ure .
255-700-0 17 4-3 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Loggi ng ont o the S ystem The Conso le Interf ace Main Menu window is dis played (see Figure 4-2).
Chapter 4 Configuring the Basic System Loggi ng ont o the S ystem 4-4 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Begi n V iewin g the Hel p W indo ws 1 On the Conso le Inter face Ma in Menu window , press the ? ke y . Th e firs t Main Menu H elp window is d isplayed (s ee Figure 4 -3): Figur e 4-3.
255-700-0 17 4-5 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Loggi ng ont o the S ystem 2 T o display the second through fourth Main Menu Help windows (see Figure 4- 4 through Figure 4 -6), pres s the Down Ar row .
Chapter 4 Configuring the Basic System Loggi ng ont o the S ystem 4-6 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 En d Selecting Options, Fields, and Commands As describ.
255-700-0 17 4-7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Changi ng th e System Pass word and Ot her User Option s ~ The informati on line displays a messa ge indicating an e rror or successful completion of the command.
Chapter 4 Configuring the Basic System Chan ging the S ystem Passwor d an d Other Use r Options 4-8 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The User Options win dow is displa yed (see Figure 4 -7). 2 Select the Change Password For < user name > field .
255-700-0 17 4-9 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Console Interface Main Men u 6 On the Console Interfa ce Main Menu window , select the Save Configuration co mmand, and pr ess Enter to store the values in the PSA X syst em dat abase .
Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The Site-Sp ecific Menu windo w is displayed (see Fig ure 4-8). 2 On the Site Specific Menu w indow , select t he Si te-Spe cific Configuration command.
255-700-0 17 4-11 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site The Site-Sp ecific Configu ration windo w is displayed (see Figur e 4-9). Note: The syste m performs error che cking on each field by highlighting any field containing an incorrect value.
Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 3. CPU IP and swi tch IP addresses cannot be on the same subnet as the in-ban d IP addres s.
255-700-0 17 4-13 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site Begi n V iewin g OAM Pro perties 1 Select the values for the fields in the Master A TM Address and OAM related data pan el as descr ibed in T able 4 -1.
Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 4-15 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site 4 Select the Apply Site-Specific Configurat ion command, and eithe r press Ente r to save t hese values now , or after you ha ve entered data in all the fields on this windo w .
Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 5 Select the Apply Site-Specific Configurat ion command, and eithe r press Enter to save these values now , or wait until you have ente red data in all the fields on this window .
255-700-0 17 4-17 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site Configuring the TCP Client/Server f or a .
Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-1 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Connection Gateway Application Programming Interfa ce API is a pro tocol that can be used inste ad of SNMP to mana ge the Lucent T echnologie s PSAX syst ems.
255-700-0 17 4-19 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g the System for Y our Site Figur e 4-12.
Chapter 4 Configuring the Basic System Configuri ng the System for Y our Site 4-2 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands on this window have the following functions: 3 Y ou ca n enter data into the fie lds on the TCP Serve r Configuration window as described in T able 4-4.
255-700-0 17 4-21 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Begi n Entering t he SNMP T rap D estinations 1 Select the NMS 1 field, and t ype the IP address value of the remote management station to which you want to send SNMP trap s.
Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Concen trator s ystems ov er an Eth ernet network. See th e appe ndix “Configuring I n-Band Manage ment.
255-700-0 17 4-23 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Before cr eating an SVC connection, y ou need to set up the Unix workstation as the ARP server , and each of the Access Concentrator s ystems.
Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 7 Enter the Address Pr efix . This is t he Addres s Prefix of the node address of the OC-3c module.
255-700-0 17 4-25 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement 2 Select the In-Band Management op tion an d pres s Enter . The In-Band Ma nagement Configuration Window displays (see Figure 4-16) .
Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands on this window have the following functions: 3 In the In-Band Manageme nt Configuration window , enter the IP addres s and IP Mask for the PSAX device.
255-700-0 17 4-27 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Field Descriptions 5 Select the values for the fields on this window from the va lues given in Ta b l e 4 - 6 .
Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-2 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 6 Select the Apply Configuration command and press Enter . End 7 Select the In-Band Mgmt Route T able command and press Enter .
255-700-0 17 4-29 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Commands The commands on this window have the following functions: 8 Select the Add a new route command and press Enter .
Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-3 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Note: At the time of initial setup, the In-B and Management T able window is empty . After you have set up routes, this window displays all the routes of this type in the system.
255-700-0 17 4-31 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement The route is now adde d. 12 Select the Go Back to Route T able command and press Enter The Inband Ma nagement Route T able window displays with the new route a dded (see Figure 4-20) .
Chapter 4 Configuring the Basic System Configuri ng In-Band Mana gement 4-3 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.
255-700-0 17 4-33 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configurin g In-Band Mana gement Commands The commands on this window have the following functions: Field Descriptions The statist ics in this window are described in T able 4-8.
Chapter 4 Configuring the Basic System Using the Equ ipment Config uration Window 4-3 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 En d Deleting an In-Band Management SV C Route Perform the step s in the follow ing procedure to delete an In-Band SVC route .
255-700-0 17 4-35 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Using the Eq uipment Configurati on Window The Equ ipment Co nfiguratio n window is display ed (see Fi gure 4-22 ).
Chapter 4 Configuring the Basic System Configuri ng the Stratum 3–4 Mod ule 4-3 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 4-37 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng the Stratum 3–4 Mod ule The Stratu m Configurat ion window is display ed (see Figure 4-23 ).
Chapter 4 Configuring the Basic System Configuri ng the Stratum 3–4 Mod ule 4-3 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 3 Select the Accuracy field, and press Enter to cycle through the pred efined set of values ( Stratum3 or Stratu m4 ).
255-700-0 17 4-39 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng the Stratum 3–4 Mod ule Note: The fol lowing ste ps 5 and 6 in this proced ure apply only if you select the LineTiming v a lu e i n th e Synchronization Source field.
Chapter 4 Configuring the Basic System Configuri ng I/O and Server Modu les 4-4 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 4-41 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration PNNI System-Wide Conf iguration For an overv iew of PNNI and the PNNI features supported on the PSAX 125 0 system, see the section abo ut PNNI in Chapter 3.
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands in this window have the following functions: The other commands on this s creen provid e read-only informati on to assist in monitoring PNNI status.
255-700-0 17 4-43 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 3 Select the PNNI Node Configuration co mmand and press Enter . The PNNI Node T able window is displayed ( see Figure 4- 26).
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands on this window have the following functions: 4 Select Add Node Ent ry and p ress Ente r .
255-700-0 17 4-45 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Commands The commands on this window have the following functions: Field Descriptions 5 Select the values for the fields on this window from the values given in Ta b l e 4 - 1 3 .
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 4-47 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Node Lowe st T ru e (default ), False Specifies the root node (true if the cur- rent node is root). Select Tr u e for this field.
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-4 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 6 Select the Create Node Entry command and press Enter . The Nod e entry is created and t he Node I d field is displayed th e node identifier o f your PSAX 12 50 system.
255-700-0 17 4-49 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Configuration window . The following p rocedure is not necessa ry to follow unless you want t o advertise th e reachable add resses that the s ystem cannot learn or automa tically detect.
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 4 Select the Add Route Address Entry command. The PNNI Route Address Configuratio n window is displayed (see Figure 4-29) .
255-700-0 17 4-51 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Field Descriptions 5 Select the values for the fiel ds in this window as described in T able 4-14 . • View Metrics T able Displays th e PNNI Metrics T able window .
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Address Inde x 1 (defa ult) This number references an entry in a table tha t keeps trac k of which nodes can access which prefixes.
255-700-0 17 4-53 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 6 Press Ctrl+A t o Create Route Addr ess Entry .
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands in this window have the following functions: 2 Select the Add Metrics Entry command.
255-700-0 17 4-55 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Commands The commands in this window have the following functions: Field Descriptions 3 Select the values for the fiel ds in this window as described in T able 4-15 .
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 T able 4-15. F ield V alues for the PNNI Metrics Configu ration Window Field Na me V alu es Descript ion Node Index 0 ( default) Range: 1–6553 5 The uniqu e identifie r for this n ode.
255-700-0 17 4-57 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 4 Select the Create Metrics Entry command. This ent ry is added t o the PNN I Metrics T able windo w .
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-5 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The Site-Specific Menu is displayed . 2 Select the PNNI System-Wide Configuration option, and pr ess Enter .
255-700-0 17 4-59 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration The PNNI S ummary Addre ss Entry window is di splayed (s ee Figure 4-33) .
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 6 Select the Create Summary Address Entry command. This ent ry is added t o the PNN I Summar y Address T able win dow .
255-700-0 17 4-61 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Begi n V iewin g PNNI M ap Links 1 On the Console Interface Main Menu, select the Site-Spe cific Configuration option, and press Enter .
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The Originating Node Ide ntifier is t he node ide ntifier of the node whose connectivity within itself or to o ther nodes is being de scribed.
255-700-0 17 4-63 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration Field Descriptions 5 The values for the fields in this window are describ ed in T abl e 4-17. Command F unction • View Metrics T ables Displays the PNNI Me trics Configura tion window .
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 6 T o view t he Metrics tab le, select V iew Metrics T ables and press Enter . The Met rics T able w indow is displayed ( see Figure 4-30).
255-700-0 17 4-65 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration The PNNI Sys tem-W ide Config uration window is di splayed (s ee Figure 4-25) . 3 Select the PNNI Li nk Information command.
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 4 If a node has been created, select the node for which you want t o view information and press Enter .
255-700-0 17 4-67 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration [Link V e rsion] (display only ) V ersion1p oint0.
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-6 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 [Re mote Po rt Id] (display only ) (Numeri cal data) Indicates t he port ide ntifier of t he port at the remote end o f the l ink as assigned by the re mote node.
255-700-0 17 4-69 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 6 T o return to the Li nk T able window , Go Back to Previous Screen and press E nter . The Link T able window is disp layed (se e Figure 4-36).
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-7 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 4-71 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration The PNNI Neighb or Peer T able window displays the node index and neighbor peer re mote node index for various n eighbo r peers.
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-7 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 4-73 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration 6 T o return to the Li nk T able window , Go Back to Previous Screen and press E nter . The Neigh bor Peer T able window is dis played (se e Figure 4- 38).
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-7 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands in this window have the following functions: Field Descriptions The fields in this w indow are de scribed in T a ble 4-20.
255-700-0 17 4-75 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em PNNI System-Wide Configuration T able 4-20.
Chapter 4 Configuring the Basic System PNNI Syste m-W ide Co nfigura tion 4-7 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 End [Route Fail Count Org.] The tota l number of time s where the PSAX 1250 system fa iled to compu te a viable DT L stack as the DTL originator for a call.
255-700-0 17 4-77 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation Configuring Call Control Resour.
Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-7 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Commands The commands on this window have the following functions: Configuration Guidelines Note: Read the follo wing configuration guidelines before you enter values in the fields.
255-700-0 17 4-79 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation Note: The va lue for svcPointT .
Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-8 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 spvcC ePointT o PointCal ls Default: 002 000 The total number o f circuit emulation point-to -point calls t o be suppor ted by the PSA X system.
255-700-0 17 4-81 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation 4 T o apply t he values you have en tered, sel ect the Apply Configuration command and pre ss Enter .
Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-8 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 4-83 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 4 Configuring the Basic Syst em Configuri ng Call Con trol Resour ce Allo cation The Remote Re boot Configura tion window is displayed (se e Figure 4-44) . 6 Select the Reboot Chassis c ommand and pres s Enter .
Chapter 4 Configuring the Basic System Configuri ng Call Contro l Resourc e Allocation 4-8 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 255-700-0 17 5-1 5 Using System Diagnostics Overview o f This Chapter The PSAX s ystem diagnostics functions gi ve you the ability to: • .
Chapter 5 Using System Di agnostics Viewin g System Status 5-2 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The Diagno stics Men u window is dis played (s ee Figure 5 -2). Figur e 5-1. Console In terface Main Menu Window (Diagno stics Option Selected) Figur e 5-2.
255-700-0 17 5-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Viewi ng System Statu s 2 Select the System Information optio n and press En ter . The System Informati on window is displayed (see Figure 5-3 ).
Chapter 5 Using System Di agnostics Viewin g System Status 5-4 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 T able 5-1. Field V alues for th e System Inform ation Window Field Name Descr iption [Softw are V ersion] (display only ) The ver sion of the system software currently running on the CPU.
255-700-0 17 5-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Runnin g Cell T est Di agnostics End Running C ell T est Diagnostics T o determine whethe r a port is operating correctly , perf orm the steps in the following procedure .
Chapter 5 Using System Di agnostics Running Cell T est Diagnostics 5-6 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The Cell T est Diagnosti cs window is disp layed (se e Figure 5-4 ).
255-700-0 17 5-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Runnin g Cell T est Di agnostics 4 Select the Apply Test Parameters command and press Enter .
Chapter 5 Using System Di agnostics Running Cell T est Diagnostics 5-8 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The Cell T est Payload Configuration w indow is displa yed (see Figure 5-5). Commands The commands on this window have the following functions: Figur e 5-5.
255-700-0 17 5-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Runnin g Cell T est Di agnostics Field Descriptions 5 Select the values for the fields on this window from the va lues given in Ta b l e 5 - 3 .
Chapter 5 Using System Di agnostics Rebooti ng PSAX Hardwa re Compo nents 5-1 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 7 Select the Refresh Transmit Payload command and press Enter . This comma nd applies the values for the test payload.
255-700-0 17 5-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Rebooting PSAX Hardwa re Comp onents 3 Select one o f the commands shown in the follow ing table as ne eded and press E nter . Figur e 5-6.
Chapter 5 Using System Di agnostics Removin g Configuration File s 5-1 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 En d Removing Con figuration Files T o remove configuration files, use the steps in the follo wing procedure, starting a t the Conso le Interface Main Menu wind ow (see Figure 5-1).
255-700-0 17 5-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Unlock ing a T eln et Sessi on Removing Configuration Files Begi n Removing Config uration Files 1 On the Console Interfa ce Main Menu window , s elect the Diagnostics option and press Enter.
Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-1 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 4 T ype the I P address of the PSAX 1250 system that is connected to th e locked-up telnet sessio n in the IP Address field, and press En ter .
255-700-0 17 5-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) • The firs t port is ass igned to the near -end user . • The second port is assigned to the far -end user , using the same configuration as the first port.
Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-1 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 2 On the Connection Configuration window , select the Circuit Emulation-to-ATM VCC configuration and p ress Enter .
255-700-0 17 5-17 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Note: At the time of initial insta llation, the Circuit Emulation-to-A TM VCC PV C T able window is empty .
Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-1 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.
255-700-0 17 5-19 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Commands The commands on this window have the following functions: Field Descriptions 4 Select the values for the fields on this window from the values given in Ta b l e 5 - 4 .
Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.
255-700-0 17 5-21 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Vo i c e Compre ssion None (default.
Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.
255-700-0 17 5-23 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Servi ce T ype Ubr (defau lt) Vbr-n.
Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 5 In the Circuit Emulation Interface section of the window , add the the slot, port , and channel designat ions for the ne ar end user from your circuit emulation module.
255-700-0 17 5-25 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Commands The commands on this window have the following functions: Field Descriptions The values for the fields on this win dow are described in T able 5-5 .
Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Slot V a riable depending on the chas sis type Enter the slot numb er containing the module for which you are creating a connection.
255-700-0 17 5-27 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) Note: T o vie w statist ics for the fa r end user , select Display Stats for Next Connection .
Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-2 8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Commands The commands on this window have the following functions: Field Desciptions 3 Se lect the val ues from the fields on this window from T able 5-6.
255-700-0 17 5-29 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) 4 Select the Apply Configuration command and press Enter .
Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-3 0 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Activating and Deactivating O AM Begi n Activa ting or De activatin g OAM 1 On the Console Interfa ce Main Menu window , select the Diagnostics option and press Enter.
255-700-0 17 5-31 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 5 U sing System Diagnostics Operation s Administration and Mainte nance (OAM) T able 5-7.
Chapter 5 Using System Di agnostics Operation s Admin istration an d Maintenan ce (OAM) 5-3 2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 4 T o begin the test , select the Activate command a nd press Enter . 5 T o terminate the test, select the Deactivate command and press Enter .
Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 255-700-0 17 6-1 6 Using VT100 T erminal Emulation VT100 terminal emula tion is used in configuring and managing the PSAX 1250 system fro m the serial interface port labeled CONSOLE on the faceplate .
Chapter 6 Using VT100 T erminal Emulati on Setting Up The Windows 95 Hyp erT erminal Emulator 6-2 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 8 Select OK . 9 Return to t he Settings Me nu. 10 From the Set tings Menu, sel ect the Communications option.
255-700-0 17 6-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Chapter 6 Using VT100 T e rminal Emulation Other Software for VT 100 T ermi nal Emulati on Other Software for VT100 T erminal Emulation The console interface support s the standard VT100 term inal emulator configuration.
Chapter 6 Using VT100 T erminal Emulati on Setting Up a U.S. Robo tics-Compatible M odem 6-4 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Setting Up a U.S. Ro botics-C ompatible Modem T able 6 -5 shows the list of comma nds to confi gure the mode m on your computer to the PSAX 1250 for interoperabilit y .
Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 255-700-0 17 7-1 7 Upgrading and Backing Up AC System Softwar e Overview o f This Chapter This chapter des cribes how to upg rade, back up, and r estore the Access Concentr ator syste m software an d firmware .
Chapter 7 Upgrading and Backing Up AC S ystem Software Over view of This Chapter 7-2 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 7-3 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Overvi ew of This Cha pter ~ Perfor ming the downl oading of the s.
Chapter 7 Upgrading and Backing Up AC S ystem Software Over view of This Chapter 7-4 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Begi n Removing Old SIMM s on a CPU Module ! CAUTION: Before you begin, place a grounding wri st st rap on your wrist a nd attach the grounding connector to a gr ounded metal object.
255-700-0 17 7-5 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Overvi ew of This Cha pter notch on the left side. The SIMM is aligned properly only when the notches on the SIMM ma tch the corr esponding tabs on the slot.
Chapter 7 Upgrading and Backing Up AC S ystem Software Over view of This Chapter 7-6 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 7-7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Overvi ew of This Cha pter Begi n Upgrading Syst em Software Usin g F TP 1 From the Console Interf ace Main Menu window (see Figure 7-4), select the Software V ersion Configuration option and press Enter .
Chapter 7 Upgrading and Backing Up AC S ystem Software Over view of This Chapter 7-8 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The Software V er sion Configuration window (see Figure 7-5) is displayed. 2 Select the F TP S oftware Release D istribut ion option and press E nter .
255-700-0 17 7-9 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Overvi ew of This Cha pter Commands The commands on the SRD Downlo.
Chapter 7 Upgrading and Backing Up AC S ystem Software Over view of This Chapter 7-1 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 4 After entering the values in the SRD Download Configuration window , complete the do wnload by compe ting these steps: 5 Select the Start SRD Downloa d command and pr ess Enter .
255-700-0 17 7-11 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Overvi ew of This Cha pter 8 On the bottom of the window , the following message is displayed: Are you sure that you want to upgrade t he software? (y/n) 9 Ty p e y to continue the upgr ade pro cess.
Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Using XModem/YM odem File T ransfer Method 7-1 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 any way hinder its capability to ta ke over the role of primary CPU on the event of the pr imary CPU module faili ng.
255-700-0 17 7-13 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgradin g Using XMod em/YModem File T ransfer Method 4 Using the.
Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Using XModem/YM odem File T ransfer Method 7-1 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Note: For t he upgr ade softw are proc ess, us e only t he Receive Options panel.
255-700-0 17 7-15 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgradin g Using XMod em/YModem File T ransfer Method T able 7-2.
Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Using XModem/YM odem File T ransfer Method 7-1 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Note: W e recommend that you use eith er the YMo dem or the YModem- G protocol .
255-700-0 17 7-17 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgradin g Using XMod em/YModem File T ransfer Method out of view . A message is displayed indicating that yo u can cancel the transfe r by pressing Ctrl+X seve ral times.
Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Firmwar e 7-1 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 7-19 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgrading Firmware Firmwar e Drivers The firmware driver is a bin.
Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Firmwar e 7-2 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 7-21 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgrading Firmware The Softwa re V ersion Configur ation wind ow (see Figur e 7-11) is displayed. 2 Select the Firmware V ersion Control optio n.
Chapter 7 Upgrading and Backing Up AC S ystem Software Upgradin g Firmwar e 7-2 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 7-23 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Upgrading Firmware 3 Under the Nex tV er sion field, select the driv er that repres ents the version of the firmwar e you want to download onto the module, and press Enter .
Chapter 7 Upgrading and Backing Up AC S ystem Software Falli ng Back to the Pr evio us Softwar e Rel ease 7-2 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 download time, you must select the Start Upgra de command on the Firmw are V ersion Co ntrol window .
255-700-0 17 7-25 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Fallin g Back to th e Pre vious So ftwar e Relea se The Softwa re V ersion Configur ation wind ow (see Figur e 7-13) is displayed.
Chapter 7 Upgrading and Backing Up AC S ystem Software Backin g Up Syst em Datab ase Files 7-2 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 7-27 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Backing Up Sys tem Database Files Backing Up Database Files Using.
Chapter 7 Upgrading and Backing Up AC S ystem Software Backin g Up Syst em Datab ase Files 7-2 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 7-29 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Backing Up Sys tem Database Files Copying the Database Files to a Storage Medium Begin Steps to Copy Database Files to a Storage Medium 1 Using the ter minal emulator , log on the Access Concentrator sy stem.
Chapter 7 Upgrading and Backing Up AC S ystem Software Backin g Up Syst em Datab ase Files 7-3 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 The XMODEM /YMODEM File T ransfer window (see Figure 7-1 5) is displayed. Note: For the database file transfer process, use only the Send Options panel.
255-700-0 17 7-31 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Backing Up Sys tem Database Files 5 Select the SendFiles command and press Enter .
Chapter 7 Upgrading and Backing Up AC S ystem Software Rest oring S ystem D ataba se Files 7-3 2 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 7-33 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Rest oring System Data base Files Restoring Database Files Using F TP T o rest ore databa se files from a separate s torage medium us ing F TP , perfor m the steps in the following procedur e.
Chapter 7 Upgrading and Backing Up AC S ystem Software Rest oring S ystem D ataba se Files 7-3 4 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 15 Ty p e <put eventmgr.cfg> and p ress E nter . 16 If you have SVCs configured on your system, type < put ii sp.
255-700-0 17 7-35 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Rest oring System Data base Files • Second, you pe rform the fi.
Chapter 7 Upgrading and Backing Up AC S ystem Software Rest oring S ystem D ataba se Files 7-3 6 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 2 On the Console Inte rface Main M enu win dow (see F igure 7-4 on page 7-7) , select the Software V ersion Configuration optio n and press Enter .
255-700-0 17 7-37 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Rest oring System Data base Files Field Descriptions 4 Select the values for the fields on this window from the va lues given in Ta b l e 7 - 5 .
Chapter 7 Upgrading and Backing Up AC S ystem Software Rest oring S ystem D ataba se Files 7-3 8 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 ~ The YMode m-G protocol allo ws the fastest transm ission of the thre e types; however , t his protocol does not acknowledge receipt of packets.
255-700-0 17 7-39 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Chapter 7 Upgrading and Backi ng Up AC System Software Rest oring System Data base Files Rebooting the AC System Begi n Steps to Reboot the Access Concentrato r System 1 Redispla y the Co nsole Int erface Ma in Menu window (s ee Figure 7-4 on page 7-7) .
Chapter 7 Upgrading and Backing Up AC S ystem Software Rest oring S ystem D ataba se Files 7-4 0 255-700-01 7 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 A-1 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 A SNMP T rap Messages This appendix d escribes the SNMP tra p and notification mes sages generated by the Access Concentrator Co nsole Inter face system SNMP agent.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 The T rap Log D isplay window is displaye d (see Figu re A-2) . T o find a des criptio n of what a trap message means, follow the se steps.
255-700-0 17 A-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s cardType , cardProtectionStatus , and cardOperStatus , which are all enume rated -type objects .
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 31 pnniNodeCfgN otify 32 pnniNodeCfgFa ilNotify 33 pnniNodeM.
255-700-0 17 A-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s 11 bridgeDomainNumberInvalidNotify 12 signalingModify FailN.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 46 viprRout ingT r ap 47 viprVpnTrap 48 viprIpIn tfT rap 49 .
255-700-0 17 A-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s 25 frFrPvc T ea rDownNoti fy 26 ci rEmCi rEmPv cT earDownN .
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 60 cirEmAtmSpvcVccT earDownNotify 61 vbrAtmSpv cVccT earDo w.
255-700-0 17 A-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s T able A -2 on pa ge A-9 prov ides informa tion abou t the .
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-10 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 aal2T runkConfig T earDownNotify Connec- tion Respons e aal2TrunkConfigIf aal2T runkConfigVpi aal2T runkConfigVci The PVC V CC AAL2 T runk has been deleted.
255-700-0 17 A-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s atmAtmSpvc- Modify FailNo- tify Inter face Info spvcAddrIf.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-12 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 atmBk- PvcVp cReqF ail- Notify Connec- tion Response at mPv.
255-700-0 17 A-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s atmPvcVccSetup Notify Connec- tion Response at mPvcVccIfA atmPvcVccVpiA atmPvcVccVciA atmPvcVccIfB atmPvcVccVpiB atmPvcVccVciB The PVC VC C con- nection between two A T M interf aces has been creat ed.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-14 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 atmSpvcMo dify- FailNotify Interface Info atmSpvcVccIfA atmSpvcVccVpiA atmSpvcVccVciA spvcC onfig Failur eCode Notification that an attempt to mo dify a TE SPVC endpoint has failed.
255-700-0 17 A-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s bridgeAtmBk- PvcVccT ear- DownNotify Connec- tion Response.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-16 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 bridgeDomain- Full Noti fy Interface Info bridgeDomainNumber The 15 ports avail- able for the bridge domain are being used, leaving no space for an ad di- tional p ort.
255-700-0 17 A-17 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s ceServiceT ype- Modify FailNo- tify Interfa ce Info portId interface FailureReasonC ode Indicates that config- uring unstructured CE failed.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-18 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 cirAtmSpvc- Modify FailNo- tify Inter face Info spvcAddrIfA cirAtmSpvcVccRemote- CePor tAddr spvcC onfig Failur eCode Notification that an attempt to mo dify a CE SPVC endpo int has failed.
255-700-0 17 A-19 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s cirEmAt- mPvcVccReq- FailNotify Connec- tion Response cirE.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-20 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 cirEmSpvcCon- figFailN otify Interfa ce Info interfaceIndex spvcC onfig Failur eCode Notification that an attempt to configur e an endpoint as CE SPVC en dpoint ha s failed.
255-700-0 17 A-21 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s differ entSystem- Soft wareN otify Syst em Critic al pr imarySo ftwareV ersion bac kupSoftw areV er sion Indicates that the primar y and backup CPU m odul es are running different ver si ons of sof twa re .
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-22 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 frAtmB k- PvcVccSetupNo- tify Connec- tion Response f rAtmP.
255-700-0 17 A-23 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s frFrP vcT ear- DownNotify Connec- tion Respo nse frFrP vcIfA frFrPv cDlciA frFrPv cIfB frFrPv cDlciB The PVC connection between two frame- relay in terface s has been del eted.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-24 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 imaGrpChan- nelCle aredNo- tify Interfa ce Info imaGrpChannelId imaGrpChanne lStatus The imaGrpChan- nelClearedNotify trap indicate s a fail- ure has been cleared in an IMA group.
255-700-0 17 A-25 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s interfaceC reat- edNot ify Interfa ce Info interfaceIndex interfaceT ype Notification that an interfa ce has be en created.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-26 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ipAtmApp- PvcVccSetupNo- tify Connec- tion Response ip AtmA.
255-700-0 17 A-27 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s isdnLapd UpNo- tify Interfa ce Info interfaceIndex isdnIntfDChanId This trap indicates that LAPD is func- tional o n the speci- fied ISDN interface .
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-28 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 lmiDlciStatus- Notify Connec- tion Respo nse interfaceI ndex d1ci Numbe r lmiDlciOperStatus Indicates the end-to- end s tatus of the PVC of which t his DLCI is a segme nt .
255-700-0 17 A-29 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s muxReady Con- firm Rec eive d- Notify System Info < NO .
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-30 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 oldStra tum- CardN otify System Critical < NO OBJECTS > This trap indicates that the primary stratu m card doe s not support this mode of op eration being applied in the stratum configura- tion.
255-700-0 17 A-31 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s pnniN odeMod- FailNotify Syst em Info swtchNodeI ndx pnniC ode Indicates that a PNNI Node Modifica tion has failed.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-32 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 pnni RtAd- drModFa ilNotify Syst em Info swtchNodeI ndx interfaceI ndex pnniC ode Indicates that a PNNI Route Ad dress Mod i- fication has faile d.
255-700-0 17 A-33 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s snmpCommuni- tyString- sChanged T oPubl icNotify System Crit ical < NO OBJECTS > An error has be en detected in the agt.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-34 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 tasC mprsAn n- ceNotify System Info tasCmp rsAnnceReasonCode Indicates the result of the requested compress announce- ment op eration.
255-700-0 17 A-35 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s vbrAtmPvcVc- cReqFailNotif y Connec- tion Respon se vbrAtm.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-36 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 vbrAtmSpvc- SetU pNoti fy Connec- tion Respons e spvcAddr I.
255-700-0 17 A-37 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s vbrSpv cModify- FailNotify Interfa ce Info interfaceIndex spvcC onfig Failur eCode Notification that an attempt to mo dify a TE SPVC endpoint has failed.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-38 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 vi-Alr eady- Exists Connec- tion Info Notification that a virtua l interfa ce assoc iated wit h that numbe r ha s alrea dy been creat ed.
255-700-0 17 A-39 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s vi-Doe s- Not_Exist Connec- tion Response Notificati on that a virtual inte rface con - nection no longer exists.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-40 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 vi-OS- Cannot- Be-0 Indicates that the virtua l interfa ce oversubscript ion cannot be 0. Must be at least 1. vi-OS-OOR Indica tes that t he virtua l interfa ce oversubscript ion is not in the ran ge 1- 10.
255-700-0 17 A-41 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges View ing S NMP T rap Message s vi-Vbr -Bw- Unavailable- Egrs Notification that the request ed amount of egre ss VBR band- width is unavailable for a duplex connec- tion.
Appendix A SNMP T rap Messages Viewi ng SNM P T rap Message s A-42 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 viprSt atRtT rap Inter face Inf o v iprSlot$ viprRou terId$v ipr- Rout eId$st atRtSt atus Indicat es success/f ail of Stat ic Route oper- atio ns.
255-700-0 17 A-43 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps Definitions of MIB Objects Used for T raps The following list contains the de finitions of the M IB objects that are associa ted with the SNMP enterprise -specifi c trap names.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-44 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.
255-700-0 17 A-45 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps atmPvc VccVciA VCI value for side A of an A TM-to-A TM PVC VCC connection. V alid range is a number be tween 0 and 65 535.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-46 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 bridgeAtmPvcVccIfA Interface ind ex for side A, the bridge side, of a Bridge-to- A T M PVC VCC connection.
255-700-0 17 A-47 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps cardSlot Physical s lot location. V alid range is a number betwe en 1 and 24. cardType T y pe of module in a physical slot.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-48 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.
255-700-0 17 A-49 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps cirEmAtmSpvcVccIfB Interfa ce index for side B, the A TM side, of a circuit emulat ion-to-A TM SPVC VCC connection.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-50 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 frAtmPvcVccDlciA DLCI value for side A, the frame relay side, of a frame relay-atm PVC VCC connectio n.
255-700-0 17 A-51 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps fwRele aseSlot Physical slot location.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-52 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ~ firmwareOutO fDate: The firmware for the I/O module does not wor k with this inte rface. ~ ts16Fo rData: ts16 has been se t for pas sing data and the user is attempting to turn on signaling.
255-700-0 17 A-53 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps interfaceInd ex Interface inde x used for identifcation in tra ps.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-54 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ipAtmAppPvcVccIfB Interface index for s ide B, the ATM side, of an in-band m anagement A T M connection.
255-700-0 17 A-55 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps T able A-16. I P T ype Reason Codes isdnIntfDChanId D-Channel Number - if the Dchannel number is 0 no LAPD will run on this PRI -ISD N int erfa ce.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-56 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ~ The fo llowing bit m ap table shows line statuses for the DS1/T1 and Enhanced DS1 modules: ~ The following b it map table shows line statuses for the DS3 module: T able A-17.
255-700-0 17 A-57 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps ~ The following bit map table shows line sta tuses for the Enhanced E1 module: ~ The following bit map table shows line statuses fo r the E3 module: T able A-19.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-58 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.
255-700-0 17 A-59 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps ~ The following bit map table sho ws line statuses fo r the V oice 2-Wire Station (2W Source) module: lmiDlciOperStatus The operational statu s of the LMI protocol.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-60 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.
255-700-0 17 A-61 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps oc3A PSSel ecto rState W : active/standby P: standby/active V a lid range is either the number 1 or 2.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-62 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.
255-700-0 17 A-63 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps portFailureRe asonCode Identification of cause for failure in chan ging the parameters of a port.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-64 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.
255-700-0 17 A-65 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps 46 cnctnDataStructure sUnavailable 47 nu llT .
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-66 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.
255-700-0 17 A-67 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps 120 interfaceB-NotCir cuitEmulation 121 unrec.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-68 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.
255-700-0 17 A-69 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps remoteReboo tReason Code The result o f a remot e rebo ot request . V alid ra nge is a number between 1 and 46.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-70 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.
255-700-0 17 A-71 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps removeCon figFiles Used t o indicate t he status of a remove configuration files request. V alid range is a number between 1 and 4.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-72 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 saveConfigurati on ReasonC ode The result o f a save configuratio n request. V alid range is a numbe r betwee n 1 and 14.
255-700-0 17 A-73 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps stat RtSt atus Return cod es for Route S erver module sta tic route condititio ns. V alid range is a number between 1 and 18.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-74 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 stratumMode Current st atus of the primary S tratum 3– 4 module. V alid rang e is a number betw een 1 and 4.
255-700-0 17 A-75 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps T able A-45. T iming Reason Codes upgradeSw CopyStatus Current status o f the ftp softw are upgrade downloa d.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-76 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 vbrAtmPvcVccIfA Interfa ce index for side A, the variable bit rate side, of a variable bit rate - to-A TM PVC VC C connection.
255-700-0 17 A-77 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix A SNMP T rap Messa ges Definitions o f MIB Objects Used for T raps vbrVbrPvcIfB Interfa ce index f or side B of a varia ble bit r ate-to- variable bit rate PVC connection.
Appendix A SNMP T rap Messages Definitions o f MIB Objects Used for T raps A-78 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 vpnTrapStatu s Return cod es for Route Server module virtual priva te network (VPN) level operations.
255-700-0 17 B-1 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 B Pin Configurations Overv iew of This Appe ndix This appendix describes the pinout configurations for the connectors on t he PSAX 1250 common e quipment modules.
Appendix B Pin Configurations Configura tion for the CPU Connector s B-2 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 -48 V dc Power Supply Module The configu ration of th e connector pins on the - 48 V dc Powe r Supply module facepla te is show n in Figure B-2.
255-700-0 17 B-3 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Appendix B Pin Configurations Configuration for the CPU Connectors operation . T able B-3 and T able B -4 describe the pin configurat ion for DB9 connec tors wi th two diffe rent wire coloring scheme s.
Appendix B Pin Configurations Configura tion for the Stratum 3 –4 Connector B-4 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.3.0 Ether net 10Base-T Interf ace The CPU mod ule faceplat e also accommod ates the Ethe rnet inter face using standard R J-45 pin assig nments.
255-700-0 17 B-5 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 Appendix B Pin Configurations Configurati on for the Stratum 3– 4 Connector The composite clock signal is a balanced s ignal, which is transmitte d over a shielded twisted pair cable.
Appendix B Pin Configurations Configura tion for the Stratum 3 –4 Connector B-6 255-700-017 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Rele ase 6.
255-700-0 17 C-1 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 C Configuring In-Band Management Setting Up In-B and Management C onfiguration Three types of in-band manage ment configur.
Appendix C Configuring In-Band Management Using the Direct Con nection Confi guration C-2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.
255-700-0 17 C-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Dir ect Connecti on Configuration ifconfig fa0 <forecard_Ip_Address.
Appendix C Configuring In-Band Management Using the Rou ted Connection C onfiguration C-4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.
255-700-0 17 C-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Rou ted Connecti on Configuration Perform t he step s in the fol lowing pr ocedure to con figure th e routed connection.
Appendix C Configuring In-Band Management Using the Rou ted Connection C onfiguration C-6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.
255-700-0 17 C-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Rou ted Connecti on Configuration Setting PVC Connections for Routed Connection Configuration Assume that t he VPI:VCI for the conne ction between node A and B is VPIab: VCIab, et c.
Appendix C Configuring In-Band Management Using the Rou ted Connection C onfiguration C-8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.
255-700-0 17 C-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Rou ted Connecti on Configuration For setting up an in-band connection from the DS3 card to the CPU module, configure the DS3 card and put it into service.
Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-10 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Slot <Slo t> VP I: VPIcfIP Addr ess: 020.001. 001.004 Port1 VC I: VCIcfI P Mask: 255.
255-700-0 17 C-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration Perform t he step s in the fol lowing proced ure to confi gure a h ybrid connection.
Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-12 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 4 For all the PSAX systems exce pt the main router PSAX s ystem, the Ethernet interface IP network should be different from the SUN machine’ s Ethernet interface IP network.
255-700-0 17 C-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration Primar y IP Ma sk: 255.
Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-14 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Port1 VCI: VCIa bIP Mask : 255.000.0 00.000 Channel 1 Slot<Slot> VPI: VPIa cIP Add ress: 020 .
255-700-0 17 C-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration Channel 1 8 V erify that a routing table entry from the SUN machine’ s network to network 20.
Appendix C Configuring In-Band Management Using the Hybr id Connection Confi guration C-16 255-70 0-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.
255-700-0 17 D-1 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 D A TM T raf fic Descriptors Overv iew of This Appe ndix This appendix d escribes how each traffic desc riptor affects t he A T M cell streams under different traffic conditions.
Appendix D A TM T raffic Descriptors T raffic Descriptor s Supported D-2 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 • One bucket , with no tagging for cells with both .
255-700-0 17 E-3 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 E Refer ence T ables Overv iew of This Appe ndix This appendix contains reference tables which will be helpful to you in ma ny situations. The information is organized as follows.
Appendix E Reference T ables QoS Information T a bles E-4 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 T able 0-2 illust rates t he attrib utes of th e classe s of servi ce suppo rted b y the Access Concentrat or system so ftware .
255-700-0 17 E-5 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables QoS In formation T ables system. The flexibility of t he Access Concentrator systems allow s the user to tailor the system based on the required se rvice applications and the selection of the a ppropriate priority lev els.
Appendix E Reference T ables Complia nce Matrix E-6 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Compliance Matrix The following table contains compliance specifications for the Access Concentr ator syste ms, and the I/O an d server modules as descr ibed in Ta b l e E - 1 .
255-700-0 17 E-7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables Complia nce Matrix ITU-T G.726 Genera l Aspects of Digital T ransmiss ion Systems T erminal E.
Appendix E Reference T ables Complia nce Matrix E-8 255-700-01 7 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 ITU-T I.12 1 Inte grated Services Digital Network (ISDN) General Structure and Service Capa bili- ties: Broa dband Aspects of ISDN ITU-T I.
255-700-0 17 E-9 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables Complia nce Matrix ITU-T I .610 B-ISDN oper ation and mainten ance princi- ples and functions OAM F4/F5 process ing (remote def ect indicat ion [RDI] and alarm indic ation sig- nal [AIS]) ITU-T Q .
Appendix E Reference T ables Complia nce Matrix E-10 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 af-phy- 0086.000 Inverse M ultiplexing over ATM (IMA) U p to 3 groups , with up to six circuits per group af-pnni- 0026.000 Interim I nter-Switch Signaling Protocol (IISP) af-pnni- 0055.
255-700-0 17 E-11 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables Alarm Status T able Alarm Status T ab le The Alarm Status field on the Equipment Configuration window displays the current status of all Pa cketStar I/O, s erver , and common equipment module in your PSAX Acce ss Concentrator s ystem.
Appendix E Reference T ables Connect ion T ype by Interface T ype T able E-12 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Connection T ype by In terface T ype T able 4 CardRemoved Al l A module has been configured and th en remo ved.
255-700-0 17 E-13 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables Connec tion T ype by I nterface T ype T able AT M - t o - AT M virtual p ath connection (VPC.
Appendix E Reference T ables Interface T ype by Mod ule T able E-14 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Interface T ype b y Module T able T able 0 -7 shows the availa ble interf ace types for each Packe tStar ™ I/O module in the Access Concentrator system.
255-700-0 17 E-15 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0 Appendix E Reference T ables Interface T ype by Mo dule T able module, the DSP2A/B /C V oice Serv er modules, the Route Serv er module, and the T ones and Announcements Server module.
Appendix E Reference T ables Interface T ype by Mod ule T able E-16 255-700-017 Packet Star ™ PSAX 1250 User Guide , Issue 1 Release 6.3.0.
255-700-0 17 F-1 Packe tStar ™ PSAX 1250 User G uide , Issue 1 Release 6.3.0 F Eur opean Community Declarations of Conformity Overv iew of This Appe ndix This appendix contains t he European Community (EC ) Declarations of Conformity for Electromagnetic Compatibility Directives, as applicable to the PSAX 1250 Access Conc entrator .
.
EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product:.
.
EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product:.
.
EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product:.
.
EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product:.
.
EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product:.
.
EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the products.
.
EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product:.
.
EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product:.
.
EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product:.
.
EC DECLARATION OF CONFORMITY We, Lucent T echnologies Access T echnology Divisi on 8301 Profes sional Plac e Landover , Maryland 20785 USA declar e, und er our sole res ponsibility , that the product:.
.
.
Copyrig ht © 2000 Lucen t T echnologies All rights reserved. Printed in the USA. Part No.: 1250M0A63 01A1 Printed on paper with 100% total recycled content.
An important point after buying a device Lucent Technologies PSAX 1250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lucent Technologies PSAX 1250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lucent Technologies PSAX 1250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lucent Technologies PSAX 1250 you will learn all the available features of the product, as well as information on its operation. The information that you get Lucent Technologies PSAX 1250 will certainly help you make a decision on the purchase.
If you already are a holder of Lucent Technologies PSAX 1250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lucent Technologies PSAX 1250.
However, one of the most important roles played by the user manual is to help in solving problems with Lucent Technologies PSAX 1250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lucent Technologies PSAX 1250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
