Instruction/ maintenance manual of the product P333T Lucent Technologies
Go to page of 12
Cajun™ P333T Quick Start Guide Unpack Rack mount (optional) Connect the cables Configure Run W eb-based Manager (optional) Power up 1 2 3 4 5 6 Cajun P333T QS.
Unpack Check the package contents for the following: E If any items are missing or damaged, contact your supplier . Equipment • One Cajun P330 Layer 2 W orkgroup Switch • One AC power cable • On.
Rack mount (optional) 1. Snap open the hinged ends of the unit’ s front panel to reveal the screw holes. 2. Position the unit in the rack. 3. Secure the unit to the rack, taking care not to overtighten the screws. 4. Snap closed the hinged ends of the front panel.
Power up Cajun P330 AC V ersion 1. Insert the power cord into the power connector (BUPS or Power Supply) on the rear of the unit. 2. Insert the other end of the power cord into the electricity supply or the BUPS connector . K The unit powers up and performs a self test procedure.
4 FIV – Force Initial V ersion (see Cajun P330 User’ s Guide) LNK – When ON, link is OK COL – When ON, indicates a collision on the port in HDX mode Tx, Rx – Shows traffic activity for trans.
5 Basic configuration T o connect a PC terminal or VT -100 terminal to the Cajun P330 1. If you are using a PC, initiate a VT -100 terminal emulation session using an application such as W indows® HyperT erminal. 2. Press Enter . K The Welcome to Cajun P330 menu is displayed.
Setting the Parameters If you wish to change the default parameters shown and configure the mandatory parameters, we recommend that you use the Command Line Interface (CLI). E For further information, please refer to Chapter 6 of the Cajun P330 User’ s Guide.
Run the W eb-Based Manager (optional) E T o configure the Cajun P330 you can use the P330 W eb-based Manager in addition to using the CLI. System Requirements Minimum hardware and Operating System requirements are: • W indows® 95 or NT® 4.
K If you do not have the Java plug-in installed, the following message appears: E If the network manager has configured the system the plug-in should be installed auto- matically . If the plug-in is not installed automatically , there are three ways to install the plug-in manually: • Either install the plug-in from the CD as follows: 1.
Documentation and Online Help Refer to the Cajun P330 Documentation and Utilities CD for full instructions Cajun P333T QS.qxd 18/07/2000 12:09 Page 10.
Notes Cajun P333T QS.qxd 18/07/2000 12:09 Page 11.
Contact Information Lucent T echnologies Inc., Enterprise InterNetworking Systems T oll Free: 1-888-ETHERNET T oll Free: (+) 800-CAJUNINF url: http://www .lucent.com/ins Y our feedback is important to us! If you have any comments about our documentation, please contact us by e-mail at cajun-info@lucent.
An important point after buying a device Lucent Technologies P333T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lucent Technologies P333T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lucent Technologies P333T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lucent Technologies P333T you will learn all the available features of the product, as well as information on its operation. The information that you get Lucent Technologies P333T will certainly help you make a decision on the purchase.
If you already are a holder of Lucent Technologies P333T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lucent Technologies P333T.
However, one of the most important roles played by the user manual is to help in solving problems with Lucent Technologies P333T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lucent Technologies P333T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
