Instruction/ maintenance manual of the product Multiplexer and Transport System ADM 16/1 Lucent Technologies
Go to page of 8
WaveStar ADM 16/1 The 2.5 Gbps SDH Multiplexer and Transport System ADM161_PB025.qxd 11/10/2000 3:14 PM Page 1.
Lucent T echnologies, leader in optical networking, offers the industry's widest range of high-quality communications systems. Intelligent multiplexers, flexible high- capacity transport systems and associated management systems form the building blocks of today's networks.
F EA TURES AND B ENEFITS O ne of the main features of the W aveStar ADM 16/1 is the ability to add/drop and flexibly cross-connect directly from the STM-16 level. Signals that can be connected are: 1.5 (DS-1), 2 (E1), 34 (E3), 45 (DS- 3), 51.8 (STM-0), 140 (E4), 155 (STM-1/OC-3) and 622 (STM-4/OC-12) Mbps.
Figure 4: WaveStar ADM 16/1 Shelf in rack ADM161_PB025.qxd 11/10/2000 3:16 PM Page 4.
· Support of SDH signals: STM- 0, STM-1, STM-4 & STM-16. · Mixing of various payload types. · In-shelf optical booster or booster/pre-amplifier . · Remote maintenance and management by Lucent T echnologies ITM network management system. · Compact self-supporting single shelf design and easy installation.
T echnical Data Interfaces Compliant with the ITU-T Recommendations: General G.707 (includes G.708 and G.709) Equipment G.781, G.782, G.783, G.784, G.813 Physical interface G.957 & G.691 for optics and G.703 for electrical interfaces. Performance requirements G.
Performance Monitorings T rail T ermination Points Equipment VC-12 for each DS1 and E1 port VC-3 for each DS3, E3 and STM-0 interfaces VC-4 for each E4 interface and on the Cross-Connect MS-0 Multiple.
This document is for planning purposes only , and is not intended to modify or supplement any Lucent T echnologies specifications or warranties relating to these products or services.
An important point after buying a device Lucent Technologies Multiplexer and Transport System ADM 16/1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lucent Technologies Multiplexer and Transport System ADM 16/1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lucent Technologies Multiplexer and Transport System ADM 16/1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lucent Technologies Multiplexer and Transport System ADM 16/1 you will learn all the available features of the product, as well as information on its operation. The information that you get Lucent Technologies Multiplexer and Transport System ADM 16/1 will certainly help you make a decision on the purchase.
If you already are a holder of Lucent Technologies Multiplexer and Transport System ADM 16/1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lucent Technologies Multiplexer and Transport System ADM 16/1.
However, one of the most important roles played by the user manual is to help in solving problems with Lucent Technologies Multiplexer and Transport System ADM 16/1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lucent Technologies Multiplexer and Transport System ADM 16/1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
