Instruction/ maintenance manual of the product 26 Lowrance electronic
Go to page of 8
1 Pub. 988-0151-361 Addendum I LCX Sonar/GPS Series 25, 26, 110, 111 and GlobalMap GPS Series 6500, 6600, 7500, 7600 This addendum addresses the manuals for the units listed above (part 988-0151-311 for the LCX sonar/GPS units and 988-0151-331 for the GlobalMap GPS units).
2 the MMC drawers or doors on the front of the unit. The other two choices, Lowrance MMC/SD and Navionics, require an MMC, SD or Navionics card. You must select the Lowrance MMC/SD set- ting to view information on a MMC or SD card, just as you must use the Navionics setting to view information on a Navionics card.
3 Hot Spots, Fishing Hot Spots Elite or Navionics chart, you must in- sert an MMC or SD card containing the mapping data into one of the MMC drawers or doors on the front of the unit. Choose the default Lowrance setting to view a MapCreate, FreedomMap, NauticPath, Fishing Hot Spots, MMC or SD card.
4 Here is the proper procedure for navigating a trail or route: 1. From the My Trails or Route Planning menu, press ↓ to the Saved Trails or Saved Routes list. To navigate a Trail: 2. Use ↑ ↓ to select a trail, then press ENT | → ↓ to N AVIGATE | ENT .
5 To add an MMC or SD Card 1. Open the card compartment door. 2. Grasp the bottom of the MMC and push the top of the card into the slot. Once the card is started, press down in the center of the card with the ball of your finger or thumb and push the card all the way to the left, until it is firmly seated in the slot.
6 Front view (left) and side view (right) showing dimensions of the LCX- 25 and LCX-26 mounted on gimbal brackets. Front view (left) and side view (right) showing dimensions of the LCX- 110 and LCX-111 mounted on gimbal brackets.
7 Cable connections, LCX-25 and LCX-26. Sonar/GPS unit, rear view GPS antenna module Power/Data socket LGC 2000 25' extension cable NMEA 2000 Power Cable Sonar socket Transducer Power Supply Cabl.
8 Cable connections, LCX-110 and LCX-111. Sonar/GPS unit, rear view GPS antenna module Power/Data socket LGC 2000 25' extension cable NMEA 2000 Power Cable Sonar socket Transducer Power Supply Ca.
An important point after buying a device Lowrance electronic 26 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lowrance electronic 26 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lowrance electronic 26 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lowrance electronic 26 you will learn all the available features of the product, as well as information on its operation. The information that you get Lowrance electronic 26 will certainly help you make a decision on the purchase.
If you already are a holder of Lowrance electronic 26, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lowrance electronic 26.
However, one of the most important roles played by the user manual is to help in solving problems with Lowrance electronic 26. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lowrance electronic 26 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
