Instruction/ maintenance manual of the product LW1002W Lorex
Go to page of 17
COLOR WIRELESS SURVEILLANCE SYSTEM WITH INDOOR / OUTDOOR NIGHT VISION CAMERA(S) Instruction Manual Copyright © 2008 Lorex Technolog y Inc. English Version 4.
2 Thank you for purchasing the LW1000 Series Color Wireless Series Surveillance System. Lorex is committed to providing our customers with a high quality, reliable security product . http://www.lorexcctv.com CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CA UTIO N : TO REDUCE THE RICK OF ELECTRI C SHOCK DO NOT REMOVE COVER (OR BACK).
Important Safeguards 3 Import ant Safeguards In addition to the careful attention devoted to quality st andards in the manufacture pro cess of your video product, safety is a major f actor in the design of ev ery instrument. However, safe ty is your responsibility too.
Important Safeguards 4 Service 13. Servicing - Do not attempt to service this video equipment yours elf as opening or removing covers may expose you to dangerous voltage or other hazards.
General Precautions 5 General Precautions 1. All warnings and instruct ions of this manual should be followed 2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol deterge nts. Use a water dampened cloth for clea ning 3. Do not use this unit in extremely humid or wet pl aces (i.
Features 6 Features ‘EWT’ Eliminates Interference From Most Hou sehold Devices Fast & Easy Installation- Plug Into any AC Outlet Receiver Connect s to any TV/VCR/DVD Recorder I.
Getting Started 7 Getting S t arted The LW1001 and LW1002 come with the following compone nts: CHECK YOUR PACKAGE TO CONFIRM T HAT YOU HAVE RECEIVED ALL COMPONENTS AS LISTED ON THE BOX. * PACKAGE CONTENTS WILL VARY BY SPECIFIC MODEL. PLEASE REFER TO THE P ACKAGE FOR CONTENT DETAILS.
Wireless Receiver 8 Wireless Receiver 1. DC 9V (5V for LW1020/ LW1022) INPUT – Connection port for the 9V/5V Power Adaptor (provide d with this system). Connect the Power Adaptor to a power source. NOTE: It is recommended that the receiver be connected to a surge ba r or similar to protect the equip ment from damage.
Control Buttons 9 LW1001 and LW1002 Control Buttons 1. AUTO BUTTON – Whe n the receiver is set to AUTO Mode, it will continuously switch between connected cameras. The dwell time is set to 4 se conds per camera (by default), however this can be adjusted to 2~30 secon ds.
Camera Installation 10 Camera Inst allation Before you install the camera(s), carefu lly plan where and how it will be positioned, and where you will route the cable that connects the cam era to the power adaptor or battery adaptor.
Camera Installation 11 Installing the Camera: 1. Carefully unpack the Camera. 2. Decide whether the camera will b e permanently wall mounted or sit on a tabletop: • If you decide to place the camera on a tabletop or other flat surfa ce, the camera can easily be moved to different location s as desired.
12 Wall Mounting Instructions (for the LW1010, LW1012, LW1020, LW1022 ONLY) To mount the camera to a wall: 1. Loosen the screw located on the side of the camera base using a sl ot head screwdriver. 2. Pull the camera free from the Stand. Mount the stand to the wall: • Mark the position of the two screw holes on the wall.
13 4. Insert the Camera into the top slot of the stand. 5. Point the camera in the desired position. Tighten the side scre w to secure the camera to the Stand.
14 NOTE : Wireless cameras require a power source (either an elect rical outlet or battery power) to operate. If you plan to permanently mount the camera in a location, it is recommended to use the included Camera Power a daptor to prevent interrupt ions in the image, as the battery adaptor is intended as a temporary power solution .
Troubleshooting 15 T roubleshooting If you have problems with your System, there is o ften a quick and simple solution . Please try the following: Problem (for LW1001, LW1002, LW1010, LW1012, LW1020, and L W1022) Solution (for LW1001, LW1002, LW 1010, LW1012, LW1020, and LW1022) There is no picture from a Camera.
Appendix #1 - Recei ver Specifications 16 Appendix #1 - Receiver Specifications Feature Specification LW1001 / LW1002 Specification LW1010 / LW1012 Specification LW1020 / LW1022 Frequency 902MHz ~ 928.
17.
An important point after buying a device Lorex LW1002W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lorex LW1002W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lorex LW1002W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lorex LW1002W you will learn all the available features of the product, as well as information on its operation. The information that you get Lorex LW1002W will certainly help you make a decision on the purchase.
If you already are a holder of Lorex LW1002W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lorex LW1002W.
However, one of the most important roles played by the user manual is to help in solving problems with Lorex LW1002W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lorex LW1002W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
