Instruction/ maintenance manual of the product 1080 Lopi
Go to page of 24
1080 C F F ir ep lace • Operation • Maintenance Tested and Listed by OMNI-Test Laboratories, Inc. Beaverton, Oregon Report # 028-F-81-5 ANSI Z21.88a-2007 WARNING: I f the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.
2 Introduction © Travis Industries 4070710 100-01194_000 Introduction We welcome you as a new owner of a 1080 CF gas fireplace. This manual details operation and maintenance of this fireplace. Please familiarize yourself with the Owner's Manual before operating your heater and save the manual for future reference.
Introduction 3 © Travis Industries 4070710 100-01194_000 Table of Contents Introduction and Important Information Introduction ............................................................. 2 Important Information .....................................
4 Safety Precautions © Travis Industries 4070710 100-01194_000 IF YOU SMELL GAS: * Do not light any appliance * Extinguish any open flame * Do not touch any electrical switch or plug or unplug anythi.
Safety Precautions 5 © Travis Industries 4070710 100-01194_000 Do not place clothin g or other flammable items on or near the heater. Because this heater can be controlled by a thermostat there is a possibility of the heater turning on and igniting any items placed on or near it.
6 Operation © Travis Industries 4070710 100-01194_000 Before You Begin Read this entire manual before you use your new fireplace (especially the section "Safety Precautions" on pages 4 & 5). Failure to follow the instructions may result in property damage, bodily injury, or even death.
Operation 7 © Travis Industries 4070710 100-01194_000 The Two Modes of Operation This fireplace uses both a wall switch and thermostat to control the fireplace.
8 Operation © Travis Industries 4070710 100-01194_000 Starting the Fireplace for the First Time • Burn the heater at a high setting for an extended period (up to 48 hours). This will cure the painted surfaces. Fumes from the paint curing and oil burning off the steel will occur.
Maintenance 9 © Travis Industries 4070710 100-01194_000 Yearly Service Procedure WARNING: Prior to removing the glass, shut off gas to the appliance (or remove the batteries from the battery box and shut off electricity to the fireplace). This prevents any chance of accidental burner ignition when accessing the firebox.
10 Maintenance © Travis Industries 4070710 100-01194_000 Glass Frame Removal and Installation WARNING: Prior to removing the glass, shut off gas to the appliance (or remove the batteries from the battery box and shut off electricity to the fireplace).
Maintenance 11 © Travis Industries 4070710 100-01194_000 Log Set Installation Overview Below is a picture detailing log placement for this fireplace. Follow the directions on the following pages to place the logs correctly. NOTE: The log set includes a package of four (4) pins used for log installation.
12 Maintenance © Travis Industries 4070710 100-01194_000 Lower Rear Log The lower rear log has two holes that insert over pins on the grate and log bracket.
Maintenance 13 © Travis Industries 4070710 100-01194_000 Upper Rear Log The upper rear log has two holes that insert over pins on the lower rear log. NOTE: With the upper rear log in place, the logs may tend to tilt backward slightly. Once the twigs are installed, the logs will remain in place.
14 Maintenance © Travis Industries 4070710 100-01194_000 Center Ember Note how the pointed end faces inwards. Push the ember back so it rests against the air channel (and not over any burner holes).
Maintenance 15 © Travis Industries 4070710 100-01194_000 Upper Left Log Place the upper left log as shown below. This flat portion rests on the left side of the grate. The front log has a hole that fits over the pin on the grate. This bracket is for the front log.
16 Maintenance © Travis Industries 4070710 100-01194_000 Left Twig Note how the left twig fits directly over the g rate. This notch fits over the grate.
Maintenance 17 © Travis Industries 4070710 100-01194_000 Right Twig Note how the notch in the right twig fits over the g rate. This notch fits over the g rate The right twig has a hole for the pin on the rear log.
18 Maintenance © Travis Industries 4070710 100-01194_000 Ember Placement Place the embers along the firebox floor and burner to help conceal the burner.
Maintenance 19 © Travis Industries 4070710 100-01194_000 Glass Cleaning The glass may be cleaned with a non-abrasive cleaner. To clean the inside of the glass, simply remove the glass frame, place it on a non-scratching surface, and clean the inside surface.
20 Maintenance © Travis Industries 4070710 100-01194_000 Wiring Diagram PRESS TO OPEN POWER AUX Learn Continuous Pilot Off/On Remote/Off ADJ S I Battery Box Wires (DC Motor Drive) - 12' Length B.
Warranty 21 © Travis Industries 4070710 100-01194_000 To register your TRAVIS INDUSTRIES, INC. 7 Year Warranty, complete the enclosed Warranty card and mail it within ten (10) days of the appliance purchase date to: TRAVIS INDUSTRIES, INC., 4800 Harbour Pointe Blvd.
22 Optional Equipment © Travis Industries 4070710 100-01194_000 Accessories The accessories listed below are available at your Travis dealer. To locate a dealer, visit: www.travisproducts.com Andirons These decorative additions attach to the grate inside the firebox and enhance the wood-fire look of your fireplace.
Optional Equipment 23 © Travis Industries 4070710 100-01194_000.
24 Index © Travis Industries 4070710 100-01194_000 Index Accessories .......................................................2 2 Adjusting the Flame Height ..................................8 Before You Begin ..........................................
An important point after buying a device Lopi 1080 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lopi 1080 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lopi 1080 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lopi 1080 you will learn all the available features of the product, as well as information on its operation. The information that you get Lopi 1080 will certainly help you make a decision on the purchase.
If you already are a holder of Lopi 1080, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lopi 1080.
However, one of the most important roles played by the user manual is to help in solving problems with Lopi 1080. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lopi 1080 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
