Instruction/ maintenance manual of the product RS3 Logitech
Go to page of 8
Installation and Operating Instructions (for chargers shown below) For additional information please call our Technical Support Group 800.742.2740 062708 PRO CHARGING SYSTEMS, LLC 1551 Heil Quaker Bou.
2 INSTALLATION AND OPER ATING INSTRUCTIONS FOR THE FOLLOWING BATTE RY CHARGING SYSTEMS: Total Independently charge 12V Model # Description Output batteries in the following systems: Recreation Series .
3 When using an extension cord, make sure: 1. That pins on the extension cord plug are t he same number, size and sha pe as those of the charger’s plu g; 2. That extension cord meets UL (Underwri ters La boratories, Inc.) acceptance an d is in proper operating condition; 3.
4 NEVER charge a frozen battery. PREPARING TO CHARGE If it is necessary to remove the battery or batteries to charge, always remove ground ed terminal from battery first. Make sure all accessories ar e off, so as not to cause battery arcing. Be sure the area around any battery is well ventilated while batteries are being charged.
5 Below is an example of the display on a Th ree output Re creation Se ries Ch arger (RS3): INSTALLATION INSTRUCTIONS All PCS battery charging systems are designed to be permanently installed in a well-ve ntilated area and have no mounting restrictions.
6 (b) All posts, terminals, and connectors should be cleaned to a shiny bright finish, using a wire brush or sand paper. This shoul d be done periodically to assure m aximum conductivity between the battery and the charger. Each charge cable assembly is equip ped with a temperat ure sensor located at the junction of each set of ring terminals.
7 TROUBLE SHOOTING PROBLEM: No LED indicators illuminate on the charger. Solution Sequence : Check the AC po wer supply from its source through all conne cting points up to the charger by using a meter or test light to confirm that current is being delivered to the charge r.
8 LIMITED WARRANTY Pro Charging Systems, LLC (PCS ) makes this Limited Warra nty only to the original retail purchaser. PCS warrants this battery charger for two years from the date of retail purcha se against defective materials and/or workmanship.
An important point after buying a device Logitech RS3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Logitech RS3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Logitech RS3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Logitech RS3 you will learn all the available features of the product, as well as information on its operation. The information that you get Logitech RS3 will certainly help you make a decision on the purchase.
If you already are a holder of Logitech RS3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Logitech RS3.
However, one of the most important roles played by the user manual is to help in solving problems with Logitech RS3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Logitech RS3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
