Instruction/ maintenance manual of the product 900 Logitech
Go to page of 7
P age Important! Before you begin working on your Harmony 900, you must discharge any static electricity you may be carrying around. Ideally , you should wear an anti-static wrist strap as you work.
P age Remov e the battery compartment cover . T here are four screws in this area that need to be remov ed. T wo are immediately visible on either side of the serial number sticker . Remov e them with a small Phillips head screwdriv er and set them aside.
P age Removing the plate will expose three screws; one at the top left and two at the bottom on either side. T hese screws are the same size as the ones y ou alread y removed. So, use y our Phillips head screw- driv er and place these screws with the others.
P age T urn the remote so that the logic board is face up. T here are three screws that need to be remo ved so that the front cov er can be separated from the logic board. T wo of the screws are near the bottom of the remote on either side and the third screw is almost dead-center just abov e the large silver -col- ored component cov er .
P age T ake the button pads from the old face plate and mov e them onto the new one. Just drop the tw o pads right in and pat them down, making sure that they are fully inserted. Also make sure that the on/off button is oriented the correct wa y .
P age With the logic board face up, take the bac k cov er plate (silver and blac k – not the ‘rubberized’ piece) and align it with the board. Y ou can verify align- ment by seeing that the screw hole at the top left of the back co ver is directly o ver the mounting post at the top of the logic board.
P age Replace the three screws that rmly attach the back co ver to the logic board. T hen, y ou are read y to reinstall the ‘rubberized’ back piece. T his piece just snaps back in. Align the piece with the back of the remote and press rmly at the top.
An important point after buying a device Logitech 900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Logitech 900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Logitech 900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Logitech 900 you will learn all the available features of the product, as well as information on its operation. The information that you get Logitech 900 will certainly help you make a decision on the purchase.
If you already are a holder of Logitech 900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Logitech 900.
However, one of the most important roles played by the user manual is to help in solving problems with Logitech 900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Logitech 900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
