Instruction/ maintenance manual of the product IP35 PRO XE abit
Go to page of 88
Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix IP35 Pro Motherboard Socket 775 User’s Manual About this Manual: This user’s manual contains a ll the information you may need for setti ng up this motherboard.
ii IP35 Pro IP35 Pro User’s Manual English + Multilingual QIG P/N: 4310-0000-89 Rev. 2.00, May 2007 Copyri g ht and Warranty Notice The information in this document is sub j ect to chan g e without .
Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix IP35 Pro iii Contents 1. Hardware Setup ............................................................... 1-1 1.1 Specif ications ..................................................
iv IP35 Pro 3. Driver & Utility ................................................................. 3-1 3.1 CD-ROM AUTORUN ...................................................................... 3-1 3.2 Intel Chipset Software Installation Utility ...
Hardware Setup IP35 Pro 1-1 1. Hardware Setup 1.1 Specifications CPU • LGA775 Socket for Intel process or of: Core 2 Extreme Edition / Core 2 Quad / Core 2 Duo, & Pentium Extreme Edition / Pentium Dual Core / Pentium D / Pentium 4.
1-2 IP35 Pro 1.2 Motherboard Layout.
Hardware Setup IP35 Pro 1-3 1.3 Choosing a Computer Chassis • Choose a chassi s big enough to in stall thi s motherboard. • As some features fo r this motherboard are impl emented by cablin g connectors on the motherboard to ind icators and switche s or buttons on the cha ssis, make sure your chassi s supports all the features required.
1-4 IP35 Pro 1.5 Checking Jumper Settings • For a 2-pin jumper, pl ug the jumper cap on both pins will make it CLOSE (SHORT). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at OPEN position. SHORT OPEN OPEN • For 3-pin jumper, pin 1~2 or pin 2~3 c an be shorted by pl ugging the jumper c ap in.
Hardware Setup IP35 Pro 1-5 CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power source.
1-6 IP35 Pro 1.6 Connecting Chassis Components 1.6.1 Power Connectors These connectors provide the connection from an ATX12V power supply. As the pl ugs from the power supply fit in only one orientation, find the correct one and p ush firmly down into these foolproof-designed connectors.
Hardware Setup IP35 Pro 1-7 1.6.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LE D indicators on the chassis front panel. Watch the power LED pin pos ition and orient ation. The mark “+” ali g n to the pin in the fi g ure below stands for positive polarity for the LED connection.
1-8 IP35 Pro 1.7 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidental scratch of a tiny surface-mount co mponent may seriously damage the motherboard. ※ In order to protect the contact pins, pl ease pay attention to these notices: 1.
Hardware Setup IP35 Pro 1-9 5. Use your left hand to hold the load plate, and use your right thumb to peel the cap off. The cap plays an important role in protecting contact pins. In order to prevent bent pin, PUT ON the cap after operation or testing.
1-10 IP35 Pro 1.7.2 DDR2 Memory Slots To reach the performance of Dual Channel DDR2, the following rules must be obeyed: • For a 2-DIMM dual-channel installation: Populate DIMM modules of the same type and size on slots [ DIMM1 ]+[ DIMM3 ], or slots [ DIMM2 ]+[ DIMM4 ].
Hardware Setup IP35 Pro 1-11 1.7.3 PCI Express X16 Add-on Slots (Install Graphics Card) This motherboard prov ides dual PCI Express X 16 sl ots for one or two graphics cards installation of graphics cards that comply with PCI Express specifications.
1-12 IP35 Pro 1.8 Connecting Peripheral Devices 1.8.1 Floppy and IDE Disk Drive Connectors The FDC1 connector connects up to two floppy drives with a 3 4-wire, 2-connector floppy cable. Connect the single end at the longer length of ribbon cable to the FDC1 on the board, the two connectors on the other end to the floppy disk drives connector.
Hardware Setup IP35 Pro 1-13 1.8.2 Serial ATA Connectors Each SATA connector serves as one single channe l to connect one SATA device b y SATA cable. To connect SATA device: 1. Attach either en d of the s ignal cable to the SATA connector on motherboard.
1-14 IP35 Pro 1.8.3 Additional USB 2.0 Port Headers Each header supports 2x addi tional US B 2.0 ports by c onnecting brack et or cable to the rear I/O panel or the front-mounted USB ports of your chassis.
Hardware Setup IP35 Pro 1-15 1.8.5 Internal Audio Connector This connector connects to the audio output of internal CD-ROM drive or add-on card . 1.8.6 Front Panel Audio Connection Header This header .
1-16 IP35 Pro Driver Configuration for AC’97 audio connection: The audio driver is originally configured to sup port HD Audio. For AC’97 audio connection, you may: 1. Right-click the “Realtek HD Audio Manager” icon in system tray. 2. Click “Audio I/O” tab, and then click “Connector Settings”.
Hardware Setup IP35 Pro 1-17 1.8.7 S/PDIF Output Connection Header This header provides the S/PDIF output connection to your add-on HDMI VGA card. Pin Pin Assignment 1 VCC (5V) 2 x 3 S/PDIF Out 4 Ground 1.8.8 PCI and PCI Express X1 Slots Install PCI Express X1 cards into slot “PCIE1”.
1-18 IP35 Pro 1.8.9 Guru Panel Connection Header This header is reserved for connecting abit ’s exclusive Guru Panel. For more information, please refer to the included Guru Panel Installation Guide.
Hardware Setup IP35 Pro 1-19 1.9 Onboard Indicators and Buttons 1.9.1 POST Code Displayer This is an LED device to display the “ POST ” Code, the acronym for P ower O n S elf T est. The computer will execute the POST action whenever you power on the com puter.
1-20 IP35 Pro 1.9.2 Power Source Indicators • 3VSB: This LED lights up when the pow er su pply is connected with power source. • VCC: This LED lights up when the system p ower is on. 1.9.3 Onboard Buttons • PWRSW1: Push this bu tton to power on the system.
Hardware Setup IP35 Pro 1-21 1.10 Connecting Rear Panel I/O Devices The rear I/O part of this mo therboard provides the f ollowing I/O ports : • Mouse: Connects to PS/2 mouse. • Keyboard: Connects to PS/2 keyboard. • EZ-CCMOS1: This switch enables clearing the CMOS memory w ithout uncovering the system chassis.
1-22 IP35 Pro.
BIOS Setup IP35 Pro 2-1 2. BIOS Setup This motherboard provides a p rogrammable EE PROM so that you can update the BIOS utility. The BIOS (Basic Input/Output System) is a pr ogram that deals with the basic level of communication bet ween processor and peripherals.
2-2 IP35 Pro 2.1 μ Guru ™ Utility There are two setup menus in this μ Guru utility. You may switch between these two by clicking the left or right arrow key on keyboard: 2.
BIOS Setup IP35 Pro 2-3 - Multiplier Factor This item displays the multiplier factor for the CPU you installed. - Estimated New CPU Clock This item displays an es timated CPU processor speed . - DRAM Speed (CPU:DRAM) This item determines the DRAM frequency.
2-4 IP35 Pro - CPU GTLREF 0&2 / CPU GTLREF 1&3 These items select the percentage ratio of CPU VTT voltage for each group of the CPU GTL reference voltage. Power Cycle Statistics Click <Enter> key to enter its submenu: μ Guru Utility v1.
BIOS Setup IP35 Pro 2-5 Temperature Monitoring Click <Enter> key to enter its submenu: μ Guru Utility v1.01C ABIT EQ Temperature Monitoring Reading Shutdown Enable Shutdown Temp.
2-6 IP35 Pro Voltage Monitoring Click <Enter> key to enter its submenu: μ Guru Utility v1.01C ABIT EQ Voltage Monitoring Reading Shutdown Enable Beep Enable High Limit Low Limit (*)CPU Core Voltage 1.25 V (*) (*) 1.60 V 0.00 V (*)DDR2 Voltage 1.
BIOS Setup IP35 Pro 2-7 Fan Speed Monitoring Click <Enter> key to enter its submenu: μ Guru Utility v1.01C ABIT EQ Fan Speed Monitoring Reading Shutdown Enable Beep Enable Low Limit (*)CPU .
2-8 IP35 Pro FanEQ Control μ Guru Utility v1.01C ABIT EQ FanEQ Control ► 1st FanEQ Group Press Enter Item Help ►► ► 2nd FanEQ Group Press Enter :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit 1st FanEQ Group Click <Enter> key to enter its submenu (1st FanEQ Group): μ Guru Utility v1.
BIOS Setup IP35 Pro 2-9 - Control Temperature High/Low These items set the high and low temperature limit that you want to do the fan speed control. - Fan PWM Duty Cycle High/Low These items set the high and low limit of PWM d uty cycle that you want to provide the fan with.
2-10 IP35 Pro 2.2 Standard CMOS Features Phoenix – AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Fri, May 11 2007 Item Help Time (hh:mm:ss) 12 : 34 : 56 ► SATA Channel 1 None ► SATA Channel 3 None ► SATA Channel 2 None ► SATA Channel 4 None ► SATA Channel 5 None ► SATA Channel 6 None Drive A 1.
BIOS Setup IP35 Pro 2-11 HDD Auto-Detection This item allows you to detect t he parameters of hard drives by pressing <Enter> key. The parameters will be shown on the screen autom atically. SATA Channel 1 ~ SATA Channel 6 When set to [Auto], the BIOS will automatically check what kind of SAT A hard drive you are using.
2-12 IP35 Pro [All, But Keyboard]: The system-b oot will stop for all errors except a keyboard error. [All, But Diskette]: The system-boot will stop for all errors except a diskette error. [All, But Disk/Key]: The system-boot will stop for all errors excep t a diskette or keyboard error.
BIOS Setup IP35 Pro 2-13 2.3 Advanced BIOS Features Phoenix – AwardBIOS CMOS Setup Utility Advanced BIOS Features CPU L3 Cache Enabled Item Help ► CPU Feature Press Enter ► Hard Disk Boot Priori.
2-14 IP35 Pro Leave this item at its default [Disabled] settings for OS like Wind ows XP. C1E Function This item appears only for certain processors with the C1E (Enhanced Halt State) Function. When set to [Enabled], the processor will further reduce the total p ower consumption.
BIOS Setup IP35 Pro 2-15 Boot Up Floppy Seek When set to [Enabled], the BIOS will check whether the flopp y disk drive is installed or not. Boot Up NumLock Status This item determines the default state of the numeric keypad at system booting up. [On]: The numeric keypad functions as number keys.
2-16 IP35 Pro 2.4 Advanced Chipset Features Phoenix – AwardBIOS CMOS Setup Utility Advanced Chipset Features DRAM Timing Selectable By SPD Item Help x - CAS Latency Time (tCL) Auto x - RAS# to CAS# .
BIOS Setup IP35 Pro 2-17 2.5 Integrated Peripherals Phoenix – AwardBIOS CMOS Setup Utility Integrated Peripherals ► OnChip SATA Device Press Enter Item Help ► OnChip PCI Device Press Enter ► O.
2-18 IP35 Pro O nChip PCI Device Click <Enter> key to enter its submenu: Phoenix – AwardBIOS CMOS Setup Utility OnChip PCI Device OnChip Audio Controller Enabled Item Help ► USB Device S.
BIOS Setup IP35 Pro 2-19 [High Speed]: All USB devices operate on high-speed mode. [Full/Low Speed]: All USB devices operate on full/low-speed mod e. - USB Keyboard Support Via Select [ BIOS ] for the legacy operat ing system (suc h as DOS) that does not support USB keyboard.
2-20 IP35 Pro Options: [IDE], [RAID], [AHCI]. Back to Integrated Peripherals Setup Menu Onboard FDC Controller This option enabl es or disables the floppy di sk control ler.
BIOS Setup IP35 Pro 2-21 2.6 Power Management Setup Phoenix – AwardBIOS CMOS Setup Utility Power Management Setup ACPI Suspend Type S3(Suspend-To-RAM) Item Help - Resume by USB from S3 Enabled Power.
2-22 IP35 Pro Resume by Alarm When set to [ Enabled ], you can set the date and time you would like the Soft-Off PC to power-on in the “ Date (of Month) Alarm ” and “ Time (hh:mm:ss) Alarm ” items.
BIOS Setup IP35 Pro 2-23 [Power On]: When power returns after an AC powe r failure, the system’s power will be powered on automati cally. [Last State]: When power returns after an AC power failure, the system will return to the state where you left off before power failure occurred.
2-24 IP35 Pro 2.8 Load Fail-Safe Defaults This option loads the BIOS default values for the most stab le, minimal-performance system operations. 2.9 Load Optimized Defaults This option loads the BIOS default values that are factory settings for op timal-performance system operations.
Driver & Utility IP35 Pro 3-1 3. Driver & Utility The “Driver-&-Utility CD” that came packed with this m otherboard contains drivers, utilities and software applications required for its ba sic and advanced features. 3.1 CD-ROM AUTORUN To run the CD-ROM automatically: 1.
3-2 IP35 Pro 3.2 Intel Chipset Software Installation Utility To install this program: 1. Click on the [ Drivers ] tab in the installation menu screen. 2. Click the [ Intel Chipset Software Installation Utility ] item. The installation screen appears. 3.
Driver & Utility IP35 Pro 3-3 3.4 Audio Driver To install this program: 1. Click on the [ Drivers ] tab in the installation menu screen. 2. Click the [ Audio Driver ] item. The installation screen appears. 3. Follow the prompts on the screen to complete installation.
3-4 IP35 Pro 3.5 LAN Driver To install this program: 1. Click on the [ Drivers ] tab in the installation menu screen. 2. Click the [ LAN Driver ] item. The installation screen appears. 3. Follow the prompts on the screen to complete installation. 3.6 JMicron SATA Driver This driver provides functionality for the onboard SATA RAID Controller.
Driver & Utility IP35 Pro 3-5 3.8 abit μ Guru The μ Guru Utility combined with the optional Guru Panel allow s you to access and select system performance of your sy stem while playin g games, listening mus ic, browsing Internet or office applications in full screen with no need to stop or close the running application.
3-6 IP35 Pro 3.9 SATA RAID Driver (for Windows Vista) The Raid Driver needed when installing Windows Vista operating system is located at the following path of your CD-ROM drive after p lacing the “.
Multilingual QIG IP35 Pro 4-1 4. Multilingual Quick Installation Guide 4.1 Français//Guide d'Installation Rapide Ce “Guide d’Installation rapi de ” contient seulement l information de base dont vous pouvez avoir besoin lors de l’installation de votre c arte mère abit.
4-2 IP35 Pro 4.2 Deutsch//Kurze Installationsanleitung Diese “Kurze Installationsan leitung” enthält nur die grundlegenden Har dwareinformat ionen, die Sie zur Installation Ihres abit-Motherboards be nötigen. Details finden Sie im ausführ lichen Handbuch.
Multilingual QIG IP35 Pro 4-3 4.3 Italiano//Guida all’installazione rapida Questa “Guida all’ins tallazione rapida ” contiene solame nte le informazioni di b ase sull’hardware necessarie all’installazione de lla scheda ma dre abit. Fare r iferimento alla versione completa della guida per ese guire le operazioni avanzate.
4-4 IP35 Pro 4.4 Español//Guía rápida de instalación Esta “Guía de insta lación rápida” contie ne solamente la información b ásica sobre el hard ware que puede n ecesitar durante la instalación de la pl aca base abit. Para conocer el funcionamien to avanzado, es n ecesario consultar l a versión completa.
Multilingual QIG IP35 Pro 4-5 4.5 Português//Guia de instalação rápida Este “Guia de instal ação rápida” cont ém apenas informação essenci al sobre o hardw are e necessária à instalação da sua p laca princip al abit. Para mais informações, terá de co nsultar a versão in tegral deste guia.
4-6 IP35 Pro 4.6 Русский // Краткое руководство по установке В “ Кратком руководстве по установке ” содержится толь.
Multilingual QIG IP35 Pro 4-7 4.7 Eesti//Kiirpaigaldusjuhend Käesolev “Kiirpaig aldusjuhen d” sisaldab ai nult abit-emaplaadi p aigaldamiseks vajal ikku riistvaraalast põhiteavet. Edasijõudnud kasuta miseks tuleb teil ikkagi pöörduda täisversiooni poole.
4-8 IP35 Pro 4.8 Latviski// Ā tr ā s instal ē šanas instrukcija Š ī “ Ā tr ā s instal ē šanas instrukcij a” ietver tikai pamata nor ā des iek ā rtai, kas nepieciešamas, instal ē jot abit m ā tesplati. Piln ī g ā kai darb ī bai nepieci ešams ieg ū t instrukcijas pap lašin ā to variantu.
Multilingual QIG IP35 Pro 4-9 4.9 Lietuvi ų //Trumpas instaliavimo vadovas Šiame “Trumpame instali avimo vadove” pateikta tik esmin ė informacija apie technin ę į rang ą , kurios jums gali pr ireikti instaliuojant pagrindin ę plok št ę abit.
4-10 IP35 Pro 4.10 Polski//Instrukcja szybkiej instalacji Ta “Instrukcja szybki ej instalacji” zaw iera tylko podstawowe informac je dotycz ą ce sprz ę tu, wymaga ne podczas instala cji p ł yty g ł ównej abit. Przy zaawansowanych operacjach, ni ezb ę dne b ę dzie skorzysta nie z kompletnej wer sji instrukcji.
Multilingual QIG IP35 Pro 4-11 4.11 Magyar//Gyorstelepítési útmutató Ez a “Gyorstelepítési útmu tató” csak azt az alapvet ő hardver információ t tartalmazza, amely az abit al aplap telepítéséhez szükséges. Az el ő rehaladott ü zemeltetéshez, továbbra is a teljes útmu tatót kell használni a.
4-12 IP35 Pro 4.12 Türkçe//H ı zl ı Kurulum K ı lavuzu Bu “H ı zl ı Kurulum K ı lavuzu”, abit an akart ı n ı z ı takman ı zda gerekebilecek sadece temel donan ı m bilgisini içermekt edir. İ leri i ş lemler iç in daha geni ş olan tam versiyonuna ba ş vurman ı z gerekecektir.
Multilingual QIG IP35 Pro 4-13 4.13 ﺔﻴﺑﺮﻌﻟا ﺔﻐﻠﻟا // ﻊﻳﺮﺴﻟا ﺐﻴآﺮﺘﻟا ﻞﻴﻟد.
4-14 IP35 Pro 4.14 ﯽﺳرﺎﻓ // ﻊﻳﺮﺳ ﺐﺼﻧ ﯼﺎﻤﻨهار.
Multilingual QIG IP35 Pro 4-15 4.15 日本語 // クイックインストールガイド この「クイックインストールガイド」には、abit マ ザーボードを取り付けるときに.
4-16 IP35 Pro 4.16 한국어 / / 빠른 설치 가이드 본 “ 빠른 설치 가이드 ” 는 빅빔 abit 메인보드 설치에 필요한 중요한 하드웨어 정보만을 포함하고 있습니다 . 보다 상세한 정보 및 과정은 사용자 설명서를 참고하시기 바랍니다 .
Multilingual QIG IP35 Pro 4-17 4.17 Bahasa Malaysia//Panduan Pemasangan Ringkas “Panduan Pemasangan Ringkas” ini hanya mengandungi maklumat perkakasan asas ya ng anda mungk in perlu semasa memasang papan induk abit anda. Untuk pengendalian lanjuta n, anda perlu rujuk k e versi lengkapnya.
4-18 IP35 Pro 4.18 ไทย // คู่มื อการต ิ ดต ั้ งอย ่ างย ่อ ข้ อม ู ลทางเทคน ิ คของอ ุ ปกรณ ์ท.
Multilingual QIG IP35 Pro 4-19 4.19 繁體中文 4.19.1 規格 處理器 • LGA775 插座支援 Core 2 Extreme Edition / Core 2 Quad / Core 2 Duo 以及 Pentium Extreme Edition / Pentium Dual Core / .
4-20 IP35 Pro 4.19.2 快速安裝略說 本「快速安裝略說」僅包含安裝 abi t 主機板時所需的 基本硬體資訊。詳細的操作方式，仍請參閱其完整的 手冊版本。 硬.
Multilingual QIG IP35 Pro 4-21 4.20 简体中文 4.20.1 规格 处理器 • LGA775 插座支持 Core 2 Extreme Edition / Core 2 Quad / Core 2 Duo 以及 Pentium Extreme Edition / Pentium Dual Core / .
4-22 IP35 Pro 4.20.2 快速安装略说 本“快速安装略说”仅包含基本的硬件信息，供您在 安装 abit 主板时进行参考。如需了解高级操作，仍请 参阅其完整的.
Appendix IP35 Pro 5-1 5. Appendix 5.1 POST Code Definitions 5.1.1 AWARD POST Code Definitions POST (hex) Description CF Test CMOS R/W functionality C0 Early chipset initialization: -Disable shadow RAM.
5-2 IP35 Pro 26 1. If Early_In it_Onboa rd_Generator is not defined Onboar d clock generator initialization. Disable respective clock resour ce to empty PCI & DIMM slots. 2. Init onboard PWM 3. Init onboard H/W monitor devices 27 Initialize INT 09 buffer 29 1.
Appendix IP35 Pro 5-3 76 (Optional Feature) Enter AWDFLASH.EXE if: -AWDFLASH is found in floppy drive -ALT+F2 is pressed 77 Detect serial ports & parallel ports.
5-4 IP35 Pro 5.1.2 AC2005 POST Code Definitions POST (hex) Description Power On Sequence 8.1. Start power on sequence 8.2. Enable ATX power supply 8.3. ATX power supply ready 8.4. DDR voltage ready 8.5. Setup PWM for CPU core voltage 8.6. Assert PWM for CPU core voltage 8.
Appendix IP35 Pro 5-5 5.2 Troubleshooting (How to Get Technical Support?) 5.2.1 Q & A Q: Do I need to clear the CMOS before I use a new motherboard to assemble my new computer system? A: Yes, we highly recommend that you clear the CM OS before installi ng a new motherboard.
5-6 IP35 Pro Q: How to get a quick response for my request on technical support? A: P lease carry out a simple troubl eshooting befo re sending “ Technical Support Form ”: System boot-up fails aft.
Appendix IP35 Pro 5-7 • Memory configuration: Type in the memory configuration in BIOS setting . Example: Memory Timing: 2.5-3-3- 7 @533MHz • Graphics information: Note Graphics card’s brand, model and driver versio n • Graphics card: Type in the brand and model name o f your graphics c ard.
5-8 IP35 Pro 5.2.2 Technical Support Form Region: E-mail: First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory configuration: Graphics card: Graphics drive.
Appendix IP35 Pro 5-9 5.2.3 Contact Information Taiwan Head Office Universal ABIT Co., Ltd. 6F, No. 323, Yang Guang St., Neihu, Taipei, 114, Taiwan Tel: 886-2-8751-3380 Fax: 886-2-8751-3381 Sales: sales@abit.com.tw Marketing: market@abit.com.tw North America, South America Universal ABIT (USA) Corporation 2901 Bayview Drive, Fremont, CA 94538, U.
P/N: 4310-0000-89 Rev. 2.00 http://www.abit.com.tw.
An important point after buying a device abit IP35 PRO XE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought abit IP35 PRO XE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data abit IP35 PRO XE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, abit IP35 PRO XE you will learn all the available features of the product, as well as information on its operation. The information that you get abit IP35 PRO XE will certainly help you make a decision on the purchase.
If you already are a holder of abit IP35 PRO XE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime abit IP35 PRO XE.
However, one of the most important roles played by the user manual is to help in solving problems with abit IP35 PRO XE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device abit IP35 PRO XE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
