Instruction/ maintenance manual of the product RM-DN2 Logic 3
Go to page of 19
MV-Flash M3+ User Guide V2.1 This brief guide explains how to use and set up your MV-FLASH M3+ decoder board. It is intended for Digital View/RemoteMedia staff who assemble ViewStream product for demos or for customers, and for resellers of RemoteMedia equipment.
2 System Design A typical setup of a Video Monitor display with a MV-FLASH M3+ looks like this: C 6 N C 5 N J6 LED1 S3 C 7 N CNV 1 CN9 PP 1 J1 J2 J3 J4 BT1 MV-Flash M 3+ 1 1 1 1 1 1 1 SW a nd Butto n .
A) Mechanical buttons • Standard MV-switchmount with 8 buttons. • Custom made switchmount for 1-8 buttons when connected to the buttons connector CN6 via the standard switchmount cable. • Custom made switchmount kit for 1-8 buttons when connected to the Remote Ext.
3 Quick Start CAUTION: Never connect or disconnect parts of the system when the system is powered up as this may cause serious damage. CONNECTION – Connection and usage are straightforward. However, care needs to be taken with the following: • Ensuring parts have been correctly connected – both power & signal considerations.
4 General Notes The MV-FLASH M3+ is designed for use with Video Monitors and other analogue signal input displays. Here are some notes for correct use: • Preparation - Before you proceed, please familiarize yourself with the various connectors, jacks, switches and function buttons of the MV-FLASH M3+ unit (see the ‘System Design’ diagram).
5 Connectors, pinouts & jumpers The various connectors are: Ref Purpose Description CN1 Speaker out (L/R) connector JST B4B-XH-A CN2 Reserved 5x2 header (0.1” pitch) CN4 Alternative Video/VGA switch JST B3B-PH-K CN5 Remote Ext. MINI DIN 8-way CN6 Switches and buttons connector Hirose 1.
Details: CN1 – Speaker out (L/R) PIN S YMBOL DESCRIPTION 1 GND Ground 2 L Left speaker out 3 GND Ground 4 R Right speaker out CN2 – Reserved CN4 – Alternative Video/VGA switch PIN S YMBOL DESCRIPTION 1 +5V Reserved 2 MODE VGA (short 2-3) Video (Open 2-3) 3 GND GND CN5 - Remote Ext.
CN9 - Alternative audio output PIN S YMBOL DESCRIPTION 1 GND Ground 2 AUDIO_L Audio left channel output 3 GND Ground 4 AUDIO_R Audio right channel output CN10 - Alternative power PIN S YMBOL DESCRIPTI.
CNV2 - VGA output PIN S YMBOL DESCRIPTION 1 GND Ground 2 H_SYNC Horizontal Sync Output 3 V_SYNC Vertical Sync Output 4 B Analog Blue 5 G Analog Green 6 R Analog Red CNV3 - Reserved LED2 – Alternativ.
J6 – Compact Flash card connector PIN S YMBOL DESCRIPTION 1 GND Ground 2 D3 Data bit 3 3 D4 Data bit 4 4 D5 Data bit 5 5 D6 Data bit 6 6 D7 Data bit 7 7 /CE1 Card enable 1 8 GND Ground 9 GND Ground .
S1 - PAL/NTSC switch PIN SYMBOL DESCRIPTION 1-2 PAL PAL 2-3 NTSC NTSC S2 - Video/VGA switch PIN SYMBOL DESCRIPTION 1-2 COMP_SVIDEO Composite / S-Video Output 2-3 VGA VGA Output S3 – Power On/Off swi.
6 System Setup A) SELECT SWITCHES Before powering on the MV-FLASH M3+: • Make sure the corresponding signal cables have been connected from the Composite or S-Video output jacks. • Set the 'PAL/NTSC' switch (S1) to the chosen output format.
• Press the 'play' button'. • The first track of the collection of MPEG files will be played. Note: special specific track playback activated by assigned button can also be performed in sleep mode - contact local sales office.
7 Operating Instructions OPERATING MODES There are two operating modes in MV-Flash M3+ – “playlist mode” and “simple play mode” . 1. Playlist mode When operating in playlist mode, both project file (*.prj) and playlist file (*.pll) must be present on the Compact Flash card.
REPEAT (Button 4) • When REPEAT is pressed the current track loop back on itself continuously. • To disable the repeat mode press REPEAT, PLAY, PREVIOUS TR ACK or NEXT TRACK . When the track plays to the end it will playback the next track (and etc.
8 Dimensions The maximum thickness of the controller is 20.6mm with or without video add-on boar d (measured from bottom of PCB to top of components, including any underside components & leads).
9 Specifications Playable formats: MPEG-1 video (Video CD) MPEG-2 video* (DVD) MPEG-4 video (DivX format) MPEG still picture MP3 audio JPEG still picture VGA (640x480) Video Storage medium: CompactFla.
WARRANTY The products are warranted against defects in workmanship and material for a period of one (1) year from the date of purchase provided no modifications are made to it and it is oper ated under normal conditions and in compliance with the instruction manual.
CONTACT DETAILS ASIA: Digital View Ltd 19 th Floor, Tai Tung Building 8 Fleming Road Wanchai Hong Kong Tel : (852) 2861 3615 Fax : (852) 2520 2987 Sales : sales@digitalview.
An important point after buying a device Logic 3 RM-DN2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Logic 3 RM-DN2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Logic 3 RM-DN2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Logic 3 RM-DN2 you will learn all the available features of the product, as well as information on its operation. The information that you get Logic 3 RM-DN2 will certainly help you make a decision on the purchase.
If you already are a holder of Logic 3 RM-DN2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Logic 3 RM-DN2.
However, one of the most important roles played by the user manual is to help in solving problems with Logic 3 RM-DN2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Logic 3 RM-DN2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
