Instruction/ maintenance manual of the product WIP330 Linksys
Go to page of 87
A Division of Cisco Systems, Inc . ® User Guide Model No . WIP330 IP Phone Wir eless- G Voice.
.
Wireless-G IP Phone Copyright and T r ademarks Specificat ions are subject t o change without notice. Linksys is a registered trademar k or trademark o f Cisco Systems, Inc . and/or its affiliates in the U.S . and certain other countries. Copyright © 2005 Cisco Systems, Inc.
Wireless-G IP Phone Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in This User Guide? 1 Chapter 2: Getting to Know the Wireless-G IP Phone 3 The Bottom Panel 3 The Front and Side Pane.
Wireless-G IP Phone List of Figures Figure 2-1: Bottom Panel 3 Figure 2-2: Front Panel 4 Figure 2-3: Side Panel 5 Figure 2-4: Back Panel 6 Figure 3-1: Press the Button 7 Figure 3-2: Insert the Battery.
Wireless-G IP Phone Figure 4-18: Network Settings - Fixed IP 29 Figure 4-19: Enter IP Address 29 Figure 4-20: Select Subnet Mask 29 Figure 4-21: Enter Subnet Mask 29 Figure 4-22: Select Phone Settings.
Wireless-G IP Phone 1 Chapter 1: Introduction Welcome Chapter 1: Introduction W elcome Thank you for choosing the Lin ksys Wireless-G IP Phone . It will allow you to make phone calls using your broadband connection, whether yo u are at home , in your office , or at a public hotspot.
Wireless-G IP Phone 2 Chapter 1: Introduction What’s in This User Guide? • Chapter 2: Getting to Know the Wireless- G IP Phone This chapter describes the physical features of the IP Phone. • Chapter 3: Installing and Us ing the Wireless-G IP Phone This chapter explains how to install the IP Phone and use it.
Wireless-G IP Phone 3 Chapter 2: Getting to Know the Wireless-G IP Phone The Bottom Panel Chapter 2: Getting to Know the Wireless-G IP Phone The Bottom P anel The IP Phone’s headset jack and USB po rt ar e located on the bo ttom panel. Headset Jack This jack allows you to connect a headset.
Wireless-G IP Phone 4 Chapter 2: Getting to Know the Wireless-G IP Phone The Front and Side Panels The Front and Side P anels The power LED is located at the top of the IP Phone, while its buttons are located on the front and side panels. Power LED Blue/Purple.
Wireless-G IP Phone 5 Chapter 2: Getting to Know the Wireless-G IP Phone The Front and Side Panels Po w e r O n / O f f o r End Call Press and hold this button for two seconds to power the IP Phone on or off .
Wireless-G IP Phone 6 Chapter 2: Getting to Know the Wireless-G IP Phone The Back Panel The Back P anel The IP Phone’ s speaker (for the speakerphone feature) a nd batter y compartment are locate d on the back panel of the IP Phone . (The speaker is controlled by the speakerphone button on the side panel.
Wireless-G IP Phone 7 Chapter 3: Installing and Using the Wireless-G IP Phone Overview Chapter 3: Installing and Using the Wireless-G IP Phone Overview This chapter provides instructions for first-time installation and use of the IP Phone .
Wireless-G IP Phone 8 Chapter 3: Installing and Using the Wireless-G IP Phone Powering on the Wireless-G IP Phone P owering on the Wireless-G IP Phone Make sure you have the account information, including ne cessar y IP Phone settings, supplied by your Internet phone service provider .
Wireless-G IP Phone 9 Chapter 3: Installing and Using the Wireless-G IP Phone Powering on the Wir eless-G IP Phone 3. The power LED will flash, alter nating between bl ue and purple . For the initial charge , allow the battery to charge for at least 10 hours, so the batter y will have a full charge, which is indicated b y a solidly lit Power LED.
Wireless-G IP Phone 10 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone Setting up the Wire less-G IP Phone Before you begin, make sure your network has an active Inter net connection. 1. Press and hold the Po we r O n / O f f button for two seconds.
Wireless-G IP Phone 11 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 4. The IP Phone will au tomatically co nnect to the network you have selected. If security is enabled on the selected network , a new screen will appear .
Wireless-G IP Phone 12 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 6. The standby screen will appear . Select Menu . 7. Phone Settings will be highlighted. Na vigate the menu choices, and then se lect SIP Settings .
Wireless-G IP Phone 13 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 8. A list of SIP settings will be displa yed. For the Proxy IP setting, select Ed it . 9. Enter the Proxy IP address in the new window , and then select Save .
Wireless-G IP Phone 14 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 10. Scroll down to Pr oxy Port, and select Edit . 11. Enter the Proxy Port number address in the new window , and then select Save . 12. Scroll down to Regist er Proxy IP , and select Edit .
Wireless-G IP Phone 15 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 14. Scroll down to Register Proxy Port, and select Edit . 15. Enter the Register Proxy Port number in the new window , and then select Sav e .
Wireless-G IP Phone 16 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 18. Scroll down to Outbound Proxy Port, and select Edit . 19. Enter the Outbound Proxy Port number in the new window , and then select Save .
Wireless-G IP Phone 17 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 22. Scroll down to Phone Number , and select Edit . 23. Enter the Phone Number you will use for Inter net phone calls, and the n select Save .
Wireless-G IP Phone 18 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 26. Scroll down to Password, and select Edit . 27. Enter the Password, and then select Sa ve . 28. On the SIP Settings screen, select Sav e .
Wireless-G IP Phone 19 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 29. Select Return to return to the standby screen. 30. The standby screen will indicate that the IP Phone is ready to make or receive phone calls.
Wireless-G IP Phone 20 Chapter 3: Installing and Using the Wireless-G IP Phone Using the Wireless-G IP Phone Using the Wireless-G IP Phone T o make a call, enter the phone number you wa nt to call. Then press the Call button. When you are on a phone call, select Option to see a list of menu choices.
Wireless-G IP Phone 21 Chapter 3: Installing and Using the Wireless-G IP Phone Using the Wireless-G IP Phon e Blind TFR . For a blind transfer , sel ect Blind TFR . Dial the number to which you want to trans fer the call. Select Blind TFR again. Then hang up.
Wireless-G IP Phone 22 Chapter 3: Installing and Using the Wireless-G IP Phone Using the Wireless-G IP Phone.
Wireless-G IP Phone 21 Chapter 4: Configuring the Wireless-G IP Phone Instructions f or Configuring the Wireless -G IP Phone Chapter 4: Configuring the Wireless-G IP Phone Instructions for Configuring the Wireless-G IP Phone Follow these instructions to configure the IP Phon e’s settings.
Wireless-G IP Phone 22 Chapter 4: Configuring the Wireless-G IP Phone Status Informatio n Status Information The standby screen will display a variety of informa tion about the IP Phone. Wireless Signal Strength At the top of the screen, the icon on the left indicates wireless signal strength.
Wireless-G IP Phone 23 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Internet Phone Number The Internet ph one number of the IP Phone is shown. Menu Press the left softkey button to view the main menu. Its choices will be described in further details below .
Wireless-G IP Phone 24 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Call Log Scroll through these choices and press the left softkey to make a selection. Select Return to return to the previous menu. Missed . A list of missed calls wi ll be displayed.
Wireless-G IP Phone 25 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Phone Book Y ou will see a li st of contacts (when you ha ve contacts in the Phone Book). Select Option to see menu choices. Select Return to return to the previous menu.
Wireless-G IP Phone 26 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Add . Select Add to add a new contact. Scroll through the diff erent settings: Name , Home Number , Office Number , Mobile Number , SIP-Home Number , SIP-Office Number , SIP-Mobile Number .
Wireless-G IP Phone 27 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Call Option T o forwar d calls, select Forwa rding . Select Return to return to the previous menu. Forwarding Scroll through these choices and press the left softkey to make a selection.
Wireless-G IP Phone 28 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Network Settings Y ou have two IP Modes available , DHCP and Fixed IP . In most cases, you should keep the default setting, DHCP , if your network router or gateway will assi gn IP addresses to the IP Phone .
Wireless-G IP Phone 29 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Fixed IP If Fixed IP is selected as the IP Mode, the screen will show these settings: IP A ddress, Subnet Mask, Default Gateway , Primary DNS, and Secondary DNS.
Wireless-G IP Phone 30 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Phone Settings Y ou can customize the settings of the IP Phone . Y ou have these choices: Ring Option, Keypad T one , Wallpaper , Date & Tim e , Language , Power , and Upgrade .
Wireless-G IP Phone 31 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Keypad T one T o hear the actual keypad tone , scroll through these choi ces: Off , Soft, and Loud. The selected keypad tone is indicated by the <*> symbol.
Wireless-G IP Phone 32 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Date & Time Y ou have six choices: Date , Clock, Time Format, Clock T ype , T ime Zone , and NTP Server . Select Exit to return to the previous menu.
Wireless-G IP Phone 33 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Tim e Z o ne . Press the left softkey to select the Time Zone setting. A list of multiple time zones will be displayed. The selected time zone is indicated by the <*> symbol.
Wireless-G IP Phone 34 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Language The selected language is indicated by the <*> symbo l. Highlight the language you want to select, and then press the left softkey to save your change .
Wireless-G IP Phone 35 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Upgrade The IP Phone is pre-confi gured with the correct Download URL and OS Image File entries. Plug the USB mini-B connector of the included powe r adapter into the USB mini-B port of t he IP Phone .
Wireless-G IP Phone 36 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Wireless Y ou have two choices, Set Wi-Fi and Profiles. If you want to scan for wireless networks in your loc al area, select Set Wi-Fi . If you want to configure configuratio n profiles for different network setups, select Profiles .
Wireless-G IP Phone 37 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone The IP Phone will automatically conne ct to the network you have selected. If security is enabled on the sele cted network, a new screen will appear .
Wireless-G IP Phone 38 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Profiles Y ou will see a li st of profiles (when you have profiles a lready configured). Select Option to see menu choices. Select Exit to return to the previous menu.
Wireless-G IP Phone 39 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone transmit key number . Select Save to save the new transmit key number , or select Exit to return to the Edit Profile menu without changing the number .
Wireless-G IP Phone 40 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Key Index . For the index of transmit keys, you ha ve a choice of 1-4. T o specify which WEP key the IP Phone will use, select Edit . A new window will open.
Wireless-G IP Phone 41 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone SIP Settings SIP settings are used to configure your Internet phone service. The necessary setup information is supplied by your Internet phone service provider .
Wireless-G IP Phone 42 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Outbound Proxy IP . T o add or change the Outbo und Proxy IP address, select Edit . Enter the new Outbound Proxy IP address in the new window . Select Save to save the new setting , or select Clear to delete a number on-screen.
Wireless-G IP Phone 43 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone User Name . T o add or change the User Name , select Edit . Enter the new User Name in the new window . Select Save to save the new setting , or select Clear to delete a c haracter o r number on - screen.
Wireless-G IP Phone 44 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Web S i t e A list of web sites will be shown. Scroll through th ese choices and press the left softkey to make a selection. Select Return to return to the previous menu.
Wireless-G IP Phone 45 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Informati on The status information of the IP Phone and its software is displayed on thi s read-only screen. Scroll through the settings to view them.
Wireless-G IP Phone 46 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone.
Wireless-G IP Phone 45 Appendix A: Troubleshooting Common Problems and Solutions Appendix A: T roubleshooting This appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G IP Phone . Read the description b elow to solve your problems.
Wireless-G IP Phone 46 Appendix A: Troubleshooting Common Problems and Solutions If you have a non-Linksys router , refer to its document ation for instructions. If you ha ve a Linksys router , then follow these instructions: 1. On one of your networked computers, open your web browser .
Wireless-G IP Phone 47 Appendix A: Troubleshooting Common Problems and Solutions 2. When I make a telephone call, the call do esn’t go through; in stead, I hear a fast busy signal. Go through this checklist until your problem is solved: • Follow these instructions to reboot your cable or DSL modem, IP Phone, and router: 1.
Wireless-G IP Phone 48 Appendix A: Troubleshooting Common Problems and Solutions 6. Select the protocol you will be using, UDP . 7. Enter the IP address of the IP Phone . For example, if the IP Phone’ s IP address is 192.168.1.100, you would enter 100 in the field provided.
Wireless-G IP Phone 49 Appendix A: Troubleshooting Common Problems and Solutions • There may not be enough bandwidth available for your Internet phone call.
Wireless-G IP Phone 50 Appendix A: Troubleshooting Common Problems and Solutions If you have a non-Linksys router , refer to its document ation for instructions. If you ha ve a Linksys router , then follow these instructions: 1. On one of your networked computers, open your web browser .
Wireless-G IP Phone 51 Appendix A: Troubleshooting Frequently Asked Questions 5. The power LED does not light up. Go through this checklist until your problem is solved: • Unplug the power adapter from the IP Phone . Wa it five seconds. Re-connect the power adapter .
Wireless-G IP Phone 52 Appendix A: Troubleshooting Frequently Asked Questions.
Wireless-G IP Phone 53 Appendix B: Glossary Appendix B: Glossar y This glossary contains some basic netw orking terms you may come ac ross when using this product. For more advanced terms, see the complete Linksys glossary at http://www .linksys.com/glossary .
Wireless-G IP Phone 54 Appendix B: Glossa ry DMZ ( D e m ilitarized Z one) - Removes the Router's firewall protection from one PC, allowing it to be “seen” from the Internet. DNS ( D omain N ame S erver) - The IP address of your ISP's server , which translates the names of websi tes into IP addresses.
Wireless-G IP Phone 55 Appendix B: Glossary ISP ( I nternet S er vice P rovider) - A company that prov ides access to the Internet. LAN - The computers and networking produc ts that make up your local network. MAC ( M edia A ccess C ontrol) Address - The unique address that a manufacturer assigns to each networking device .
Wireless-G IP Phone 56 Appendix B: Glossa ry Switch - 1. A data switch that conn ects com puting devices to host computers, allowi ng a large number of devices to share a limited number of ports. 2. A device fo r making, br eaking, or cha nging the connections in an electrical cir cuit.
Wireless-G IP Phone 57 Appendix C: Specifications Appendix C: Specifications Model WIP330 Standards 802.11b , 802.11g Channels 11 Channels (US , Canada), 13 Channels (Europe) T ransmit Power 12 dBm for 802.11b and 802.11g @ Normal T emp Range External Interface One Mini USB 1.
Wireless-G IP Phone 58 Appendix C: Specifications DTMF T ransmission In-band, Out-band (RFC2833) Voice Quality Acoustic Echo Cancellation Jitter Buffer Control Comfortable Noise Generation Packet Loss Concealment Dimensions 1.84" x 5.32" x 0.
Wireless-G IP Phone 59 Appendix D: Warranty Information Appendix D: W arranty Information LIMITED WARRANTY Y our Inter net phone service provider warran ts to Y o u that, for a period of one year (the “W arranty Period”), y our Linksys Produ ct will be substantially free of defects in materials and workmans hip under normal use.
Wireless-G IP Phone 60 Appendix D: Warranty Information.
Wireless-G IP Phone 61 Appendix E: Regulatory Information Appendix E: Regulator y Information FCC Statement This product has been tested a nd complies with the specificatio ns for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Wireless-G IP Phone 62 Appendix E: Regulatory Information Safety Notices Caution: T o reduce the risk of fire , use only No. 26 A WG or larger tele communication line cord. Do not use this product near water , for example , in a wet basement or near a swimming pool.
Wireless-G IP Phone 63 Appendix E: Regulatory Information User Information for Consumer Products Covered by EU Dire ctive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains import ant infor mation for users with regards to th e proper disposal and rec ycling of Linksys products.
Wireless-G IP Phone 64 Appendix E: Regulatory Information.
Wireless-G IP Phone 65 Appendix E: Regulatory Information.
Wireless-G IP Phone 66 Appendix E: Regulatory Information.
Wireless-G IP Phone 67 Appendix E: Regulatory Information.
Wireless-G IP Phone 68 Appendix E: Regulatory Information.
Wireless-G IP Phone 69 Appendix E: Regulatory Information.
Wireless-G IP Phone 70 Appendix E: Regulatory Information.
Wireless-G IP Phone 71 Appendix E: Regulatory Information.
Wireless-G IP Phone 72 Appendix E: Regulatory Information.
Wireless-G IP Phone 73 Appendix E: Regulatory Information.
Wireless-G IP Phone 74 Appendix E: Regulatory Information For more information, visit w ww .linksys.com..
Wireless-G IP Phone 75 Appendix F: Contact Information Appendix F: Contact Information Need to contact Linksys? Visit us online for information on the latest prod ucts and updates to your existing products at: http://www .
Wireless-G IP Phone 76 Appendix F: Contact Information.
www .linksys.com.
An important point after buying a device Linksys WIP330 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Linksys WIP330 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Linksys WIP330 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Linksys WIP330 you will learn all the available features of the product, as well as information on its operation. The information that you get Linksys WIP330 will certainly help you make a decision on the purchase.
If you already are a holder of Linksys WIP330, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Linksys WIP330.
However, one of the most important roles played by the user manual is to help in solving problems with Linksys WIP330. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Linksys WIP330 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
